Merge tag 'mac80211-next-for-davem-2015-02-03' of git://git.kernel.or…

…g/pub/scm/linux/kernel/git/jberg/mac80211-next

Last round of updates for net-next:
 * revert a patch that caused a regression with mesh userspace (Bob)
 * fix a number of suspend/resume related races
   (from Emmanuel, Luca and myself - we'll look at backporting later)
 * add software implementations for new ciphers (Jouni)
 * add a new ACPI ID for Broadcom's rfkill (Mika)
 * allow using netns FD for wireless (Vadim)
 * some other cleanups (various)

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/DocBook/80211.tmpl

@@ -434,7 +434,6 @@
       <section id="ps-client">
         <title>support for powersaving clients</title>
 !Pinclude/net/mac80211.h AP support for powersaving clients
-      </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
 !Finclude/net/mac80211.h ieee80211_sta_eosp
@@ -443,6 +442,7 @@
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni
 !Finclude/net/mac80211.h ieee80211_sta_set_buffered
 !Finclude/net/mac80211.h ieee80211_sta_block_awake
+      </section>
       </chapter>
 
       <chapter id="multi-iface">
@@ -487,8 +487,8 @@
           <title>RX A-MPDU aggregation</title>
 !Pnet/mac80211/agg-rx.c RX A-MPDU aggregation
 !Cnet/mac80211/agg-rx.c
-        </sect1>
 !Finclude/net/mac80211.h ieee80211_ampdu_mlme_action
+        </sect1>
       </chapter>
 
       <chapter id="smps">

drivers/net/wireless/ath/ath10k/mac.c

@@ -76,6 +76,9 @@ static int ath10k_send_key(struct ath10k_vif *arvif,
 		if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
 			arg.key_flags = WMI_KEY_PAIRWISE;
 		break;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		/* this one needs to be done in software */
+		return 1;
 	default:
 		ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
 		return -EOPNOTSUPP;
@@ -5035,6 +5038,13 @@ struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
 
 int ath10k_mac_register(struct ath10k *ar)
 {
+	static const u32 cipher_suites[] = {
+		WLAN_CIPHER_SUITE_WEP40,
+		WLAN_CIPHER_SUITE_WEP104,
+		WLAN_CIPHER_SUITE_TKIP,
+		WLAN_CIPHER_SUITE_CCMP,
+		WLAN_CIPHER_SUITE_AES_CMAC,
+	};
 	struct ieee80211_supported_band *band;
 	struct ieee80211_sta_vht_cap vht_cap;
 	struct ieee80211_sta_ht_cap ht_cap;
@@ -5108,7 +5118,8 @@ int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 			IEEE80211_HW_HAS_RATE_CONTROL |
 			IEEE80211_HW_AP_LINK_PS |
-			IEEE80211_HW_SPECTRUM_MGMT;
+			IEEE80211_HW_SPECTRUM_MGMT |
+			IEEE80211_HW_SW_CRYPTO_CONTROL;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
 
@@ -5182,6 +5193,9 @@ int ath10k_mac_register(struct ath10k *ar)
 		goto err_free;
 	}
 
+	ar->hw->wiphy->cipher_suites = cipher_suites;
+	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
 	ret = ieee80211_register_hw(ar->hw);
 	if (ret) {
 		ath10k_err(ar, "failed to register ieee80211: %d\n", ret);

include/linux/ieee80211.h

@@ -1017,6 +1017,15 @@ struct ieee80211_mmie {
 	u8 mic[8];
 } __packed;
 
+/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */
+struct ieee80211_mmie_16 {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[16];
+} __packed;
+
 struct ieee80211_vendor_ie {
 	u8 element_id;
 	u8 len;
@@ -1994,19 +2003,32 @@ enum ieee80211_key_len {
 	WLAN_KEY_LEN_WEP40 = 5,
 	WLAN_KEY_LEN_WEP104 = 13,
 	WLAN_KEY_LEN_CCMP = 16,
+	WLAN_KEY_LEN_CCMP_256 = 32,
 	WLAN_KEY_LEN_TKIP = 32,
 	WLAN_KEY_LEN_AES_CMAC = 16,
 	WLAN_KEY_LEN_SMS4 = 32,
+	WLAN_KEY_LEN_GCMP = 16,
+	WLAN_KEY_LEN_GCMP_256 = 32,
+	WLAN_KEY_LEN_BIP_CMAC_256 = 32,
+	WLAN_KEY_LEN_BIP_GMAC_128 = 16,
+	WLAN_KEY_LEN_BIP_GMAC_256 = 32,
 };
 
 #define IEEE80211_WEP_IV_LEN		4
 #define IEEE80211_WEP_ICV_LEN		4
 #define IEEE80211_CCMP_HDR_LEN		8
 #define IEEE80211_CCMP_MIC_LEN		8
 #define IEEE80211_CCMP_PN_LEN		6
+#define IEEE80211_CCMP_256_HDR_LEN	8
+#define IEEE80211_CCMP_256_MIC_LEN	16
+#define IEEE80211_CCMP_256_PN_LEN	6
 #define IEEE80211_TKIP_IV_LEN		8
 #define IEEE80211_TKIP_ICV_LEN		4
 #define IEEE80211_CMAC_PN_LEN		6
+#define IEEE80211_GMAC_PN_LEN		6
+#define IEEE80211_GCMP_HDR_LEN		8
+#define IEEE80211_GCMP_MIC_LEN		16
+#define IEEE80211_GCMP_PN_LEN		6
 
 /* Public action codes */
 enum ieee80211_pub_actioncode {
@@ -2230,6 +2252,11 @@ enum ieee80211_sa_query_action {
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
 #define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
 #define WLAN_CIPHER_SUITE_GCMP		0x000FAC08
+#define WLAN_CIPHER_SUITE_GCMP_256	0x000FAC09
+#define WLAN_CIPHER_SUITE_CCMP_256	0x000FAC0A
+#define WLAN_CIPHER_SUITE_BIP_GMAC_128	0x000FAC0B
+#define WLAN_CIPHER_SUITE_BIP_GMAC_256	0x000FAC0C
+#define WLAN_CIPHER_SUITE_BIP_CMAC_256	0x000FAC0D
 
 #define WLAN_CIPHER_SUITE_SMS4		0x00147201
 

include/net/cfg80211.h

@@ -1493,6 +1493,10 @@ struct cfg80211_match_set {
  * @rcu_head: RCU callback used to free the struct
  * @owner_nlportid: netlink portid of owner (if this should is a request
  *	owned by a particular socket)
+ * @delay: delay in seconds to use before starting the first scan
+ *	cycle.  The driver may ignore this parameter and start
+ *	immediately (or at any other time), if this feature is not
+ *	supported.
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1506,6 +1510,7 @@ struct cfg80211_sched_scan_request {
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
 	s32 min_rssi_thold;
+	u32 delay;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);

include/net/mac80211.h

@@ -376,6 +376,12 @@ enum ieee80211_rssi_event {
  * @ssid_len: Length of SSID given in @ssid.
  * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
  * @txpower: TX power in dBm
+ * @txpower_type: TX power adjustment used to control per packet Transmit
+ *	Power Control (TPC) in lower driver for the current vif. In particular
+ *	TPC is enabled if value passed in %txpower_type is
+ *	NL80211_TX_POWER_LIMITED (allow using less than specified from
+ *	userspace), whereas TPC is disabled if %txpower_type is set to
+ *	NL80211_TX_POWER_FIXED (use value configured from userspace)
  * @p2p_noa_attr: P2P NoA attribute for P2P powersave
  */
 struct ieee80211_bss_conf {
@@ -411,6 +417,7 @@ struct ieee80211_bss_conf {
 	size_t ssid_len;
 	bool hidden_ssid;
 	int txpower;
+	enum nl80211_tx_power_setting txpower_type;
 	struct ieee80211_p2p_noa_attr p2p_noa_attr;
 };
 
@@ -1287,8 +1294,8 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
  *	that the key is pairwise rather then a shared key.
  * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a
- *	CCMP key if it requires CCMP encryption of management frames (MFP) to
- *	be done in software.
+ *	CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames
+ *	(MFP) to be done in software.
  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
  *	if space should be prepared for the IV, but the IV
  *	itself should not be generated. Do not set together with
@@ -1303,7 +1310,7 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  *	RX, if your crypto engine can't deal with TX you can also set the
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
- *	driver for a CCMP key to indicate that is requires IV generation
+ *	driver for a CCMP/GCMP key to indicate that is requires IV generation
  *	only for managment frames (MFP).
  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
  *	driver for a key to indicate that sufficient tailroom must always
@@ -1634,6 +1641,12 @@ struct ieee80211_tx_control {
  *	be created.  It is expected user-space will create vifs as
  *	desired (and thus have them named as desired).
  *
+ * @IEEE80211_HW_SW_CRYPTO_CONTROL: The driver wants to control which of the
+ *	crypto algorithms can be done in software - so don't automatically
+ *	try to fall back to it if hardware crypto fails, but do so only if
+ *	the driver returns 1. This also forces the driver to advertise its
+ *	supported cipher suites.
+ *
  * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
@@ -1681,6 +1694,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
 	IEEE80211_HW_NO_AUTO_VIF			= 1<<15,
+	IEEE80211_HW_SW_CRYPTO_CONTROL			= 1<<16,
 	/* free slots */
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
@@ -1955,6 +1969,11 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * added; if you return 0 then hw_key_idx must be assigned to the
  * hardware key index, you are free to use the full u8 range.
  *
+ * Note that in the case that the @IEEE80211_HW_SW_CRYPTO_CONTROL flag is
+ * set, mac80211 will not automatically fall back to software crypto if
+ * enabling hardware crypto failed. The set_key() call may also return the
+ * value 1 to permit this specific key/algorithm to be done in software.
+ *
  * When the cmd is %DISABLE_KEY then it must succeed.
  *
  * Note that it is permissible to not decrypt a frame even if a key
@@ -4079,6 +4098,10 @@ void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
  *	reverse order than in packet)
  * @aes_cmac: PN data, most significant byte first (big endian,
  *	reverse order than in packet)
+ * @aes_gmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @gcmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
  */
 struct ieee80211_key_seq {
 	union {
@@ -4092,6 +4115,12 @@ struct ieee80211_key_seq {
 		struct {
 			u8 pn[6];
 		} aes_cmac;
+		struct {
+			u8 pn[6];
+		} aes_gmac;
+		struct {
+			u8 pn[6];
+		} gcmp;
 	};
 };
 
@@ -4116,7 +4145,7 @@ void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf,
  * ieee80211_get_key_rx_seq - get key RX sequence counter
  *
  * @keyconf: the parameter passed with the set key
- * @tid: The TID, or -1 for the management frame value (CCMP only);
+ * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
  *	the value on TID 0 is also used for non-QoS frames. For
  *	CMAC, only TID 0 is valid.
  * @seq: buffer to receive the sequence data
@@ -4152,7 +4181,7 @@ void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf,
  * ieee80211_set_key_rx_seq - set key RX sequence counter
  *
  * @keyconf: the parameter passed with the set key
- * @tid: The TID, or -1 for the management frame value (CCMP only);
+ * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only);
  *	the value on TID 0 is also used for non-QoS frames. For
  *	CMAC, only TID 0 is valid.
  * @seq: new sequence data

include/uapi/linux/nl80211.h

@@ -180,8 +180,8 @@
  *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
  *
  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- *	on an %NL80211_ATTR_IFINDEX is supported.
+ *	either a dump request for all interfaces or a specific get with a
+ *	single %NL80211_ATTR_IFINDEX is supported.
  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
@@ -324,7 +324,9 @@
  *	if passed, define which channels should be scanned; if not
  *	passed, all channels allowed for the current regulatory domain
  *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.
+ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
+ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+ *	is supplied.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
  *	scheduled scan is not running. The caller may assume that as soon
  *	as the call returns, it is safe to start a new scheduled scan again.
@@ -1735,6 +1737,9 @@ enum nl80211_commands {
  *	should be contained in the result as the sum of the respective counters
  *	over all channels.
  *
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
+ *	WoWLAN net-detect scan) is started, u32 in seconds.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2098,6 +2103,10 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SURVEY_RADIO_STATS,
 
+	NL80211_ATTR_NETNS_FD,
+
+	NL80211_ATTR_SCHED_SCAN_DELAY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3741,11 +3750,12 @@ struct nl80211_pattern_support {
  * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
  *	is detected.  This is a nested attribute that contains the
  *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
- *	specifies how the scan is performed (e.g. the interval and the
- *	channels to scan) as well as the scan results that will
- *	trigger a wake (i.e. the matchsets).  This attribute is also
- *	sent in a response to @NL80211_CMD_GET_WIPHY, indicating the
- *	number of match sets supported by the driver (u32).
+ *	specifies how the scan is performed (e.g. the interval, the
+ *	channels to scan and the initial delay) as well as the scan
+ *	results that will trigger a wake (i.e. the matchsets).  This
+ *	attribute is also sent in a response to
+ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
+ *	supported by the driver (u32).
  * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
  *	containing an array with information about what triggered the
  *	wake up.  If no elements are present in the array, it means

net/core/net_namespace.c

@@ -446,6 +446,7 @@ struct net *get_net_ns_by_fd(int fd)
 	return ERR_PTR(-EINVAL);
 }
 #endif
+EXPORT_SYMBOL_GPL(get_net_ns_by_fd);
 
 struct net *get_net_ns_by_pid(pid_t pid)
 {

net/mac80211/Kconfig

@@ -5,6 +5,7 @@ config MAC80211
 	select CRYPTO_ARC4
 	select CRYPTO_AES
 	select CRYPTO_CCM
+	select CRYPTO_GCM
 	select CRC32
 	select AVERAGE
 	---help---

net/mac80211/Makefile

@@ -15,7 +15,9 @@ mac80211-y := \
 	michael.o \
 	tkip.o \
 	aes_ccm.o \
+	aes_gcm.o \
 	aes_cmac.o \
+	aes_gmac.o \
 	cfg.o \
 	ethtool.o \
 	rx.o \