Merge tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul…

…/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This one features the usual updates to the drivers and one good part
  of removing DA_SG from core as it has no users.

  Summary:

   - Remove DMA_SG support as we have no users for this feature
   - New driver for Altera / Intel mSGDMA IP core
   - Support for memset in dmatest and qcom_hidma driver
   - Update for non cyclic mode in k3dma, bunch of update in bam_dma,
     bcm sba-raid
   - Constify device ids across drivers"

* tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits)
  dmaengine: sun6i: support V3s SoC variant
  dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
  dmaengine: rcar-dmac: document R8A77970 bindings
  dmaengine: xilinx_dma: Fix error code format specifier
  dmaengine: altera: Use macros instead of structs to describe the registers
  dmaengine: ti-dma-crossbar: Fix dra7 reserve function
  dmaengine: pl330: constify amba_id
  dmaengine: pl08x: constify amba_id
  dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED
  dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending
  dmaengine: bcm-sba-raid: Add debugfs support
  dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED
  dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests()
  dmaengine: bcm-sba-raid: Pre-ack async tx descriptor
  dmaengine: bcm-sba-raid: Peek mbox when we have no free requests
  dmaengine: bcm-sba-raid: Alloc resources before registering DMA device
  dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration
  dmaengine: bcm-sba-raid: Increase number of free sba_request
  dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request
  dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device
  ...

Documentation/ABI/stable/sysfs-driver-dma-ioatdma

@@ -0,0 +1,30 @@
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+		DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	The number of descriptors active in the ring.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Descriptor ring size, total number of descriptors available.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Version of ioatdma device.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date:           August 8, 2017
+KernelVersion:  4.14
+Contact:        dmaengine@vger.kernel.org
+Description:	Tune-able interrupt delay value per channel basis.

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -25,6 +25,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77970" (R-Car V3M)
 
 - reg: base address and length of the registers block for the DMAC
 

Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt

@@ -8,6 +8,7 @@ Required Properties:
 	  - "renesas,r8a7793-usb-dmac" (R-Car M2-N)
 	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
 	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
+	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
 - reg: base address and length of the registers block for the DMAC
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.

Documentation/devicetree/bindings/dma/sun6i-dma.txt

@@ -9,6 +9,7 @@ Required properties:
 		  "allwinner,sun8i-a23-dma"
 		  "allwinner,sun8i-a83t-dma"
 		  "allwinner,sun8i-h3-dma"
+		  "allwinner,sun8i-v3s-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock

Documentation/dmaengine/provider.txt

@@ -181,13 +181,6 @@ Currently, the types available are:
     - Used by the client drivers to register a callback that will be
       called on a regular basis through the DMA controller interrupt
 
-  * DMA_SG
-    - The device supports memory to memory scatter-gather
-      transfers.
-    - Even though a plain memcpy can look like a particular case of a
-      scatter-gather transfer, with a single chunk to transfer, it's a
-      distinct transaction type in the mem2mem transfers case
-
   * DMA_PRIVATE
     - The devices only supports slave transfers, and as such isn't
       available for async transfers.
@@ -395,6 +388,13 @@ where to put them)
 	  when DMA_CTRL_REUSE is already set
 	- Terminating the channel
 
+  * DMA_PREP_CMD
+    - If set, the client driver tells DMA controller that passed data in DMA
+      API is command data.
+    - Interpretation of command data is DMA controller specific. It can be
+      used for issuing commands to other peripherals/register reads/register
+      writes for which the descriptor should be in different format from
+      normal data descriptors.
 
 General Design Notes
 --------------------

drivers/crypto/ccp/ccp-dmaengine.c

@@ -502,27 +502,6 @@ static struct dma_async_tx_descriptor *ccp_prep_dma_memcpy(
 	return &desc->tx_desc;
 }
 
-static struct dma_async_tx_descriptor *ccp_prep_dma_sg(
-	struct dma_chan *dma_chan, struct scatterlist *dst_sg,
-	unsigned int dst_nents, struct scatterlist *src_sg,
-	unsigned int src_nents, unsigned long flags)
-{
-	struct ccp_dma_chan *chan = container_of(dma_chan, struct ccp_dma_chan,
-						 dma_chan);
-	struct ccp_dma_desc *desc;
-
-	dev_dbg(chan->ccp->dev,
-		"%s - src=%p, src_nents=%u dst=%p, dst_nents=%u, flags=%#lx\n",
-		__func__, src_sg, src_nents, dst_sg, dst_nents, flags);
-
-	desc = ccp_create_desc(dma_chan, dst_sg, dst_nents, src_sg, src_nents,
-			       flags);
-	if (!desc)
-		return NULL;
-
-	return &desc->tx_desc;
-}
-
 static struct dma_async_tx_descriptor *ccp_prep_dma_interrupt(
 	struct dma_chan *dma_chan, unsigned long flags)
 {
@@ -704,7 +683,6 @@ int ccp_dmaengine_register(struct ccp_device *ccp)
 	dma_dev->directions = DMA_MEM_TO_MEM;
 	dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
 	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
-	dma_cap_set(DMA_SG, dma_dev->cap_mask);
 	dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
 
 	/* The DMA channels for this device can be set to public or private,
@@ -740,7 +718,6 @@ int ccp_dmaengine_register(struct ccp_device *ccp)
 
 	dma_dev->device_free_chan_resources = ccp_free_chan_resources;
 	dma_dev->device_prep_dma_memcpy = ccp_prep_dma_memcpy;
-	dma_dev->device_prep_dma_sg = ccp_prep_dma_sg;
 	dma_dev->device_prep_dma_interrupt = ccp_prep_dma_interrupt;
 	dma_dev->device_issue_pending = ccp_issue_pending;
 	dma_dev->device_tx_status = ccp_tx_status;

drivers/dma/Kconfig

@@ -56,6 +56,12 @@ config DMA_OF
 	select DMA_ENGINE
 
 #devices
+config ALTERA_MSGDMA
+	tristate "Altera / Intel mSGDMA Engine"
+	select DMA_ENGINE
+	help
+	  Enable support for Altera / Intel mSGDMA controller.
+
 config AMBA_PL08X
 	bool "ARM PrimeCell PL080 or PL081 support"
 	depends on ARM_AMBA

drivers/dma/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_DMA_OF) += of-dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 
 #devices
+obj-$(CONFIG_ALTERA_MSGDMA) += altera-msgdma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
 obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o