Coming from 0.40 with extra automations and customized sliders

[SylvainGa]

Hi, while connected to one of my HASP, I noticed that version went from 0.4 to 1.05, sweet! I have a few questions though before the upgrade.

1. I'm still at HA 2021.8.6. Is that version compatible with HASP 1.05? It does have Blueprints, Some of my integration requires some changes to work with newer versions and I don't have time for that yet so that's why I haven't updated in a long time
2. I've set up extra automations. On some of my HASP, the screen blanks and lights up when touched (at night only) while other HASP dims the display as the night sets in. Can it be done with the new firmware?
3. I've customized the slider to give them a 3D look and blueish tint, do I need to recreate it or will be it upgraded?
4. What are the visual difference between 0.4 and 1.05? Are they documented somewhere?

Thanks.

[SylvainGa]

Nothing?

[aderusha]

It's a fair callout, I missed the question the first time and the reminder did what it was intended to do.

[aderusha]

1. 2021.8.6 should be compatible with 1.05.
2. There are blueprints for that!

Dim the screen backlight after a specified period of inactivity.

Dim the HASPone backlight in response to the sun going up and down.

3. If it's just the look and feel of the object, you probably won't need to change anything. I can't say for certain what the impact would be if you've changed the objects themselves or their ordering.
4. The overt visual difference to the user as displayed on the screen of the device are essentially zero. The last pages (pages 10 and 11) are different, but for most use cases you won't find too much different to see on the display. Most of the differences are on the administration side, moving automation and setup out of YAML and into blueprints.

[SylvainGa]

I activated the Telnet interface and when I run the core automation, it display this:

[+48.653s] MQTT IN: 'hasp/prisesalleamang/command/debugserialenabled' : 'true'
[+48.663s] SPIFFS: Saving config
[+48.667s] SPIFFS: mqttServer = 192.168.2.84
[+48.674s] SPIFFS: mqttPort = 1883
[+48.693s] SPIFFS: mqttUser = mqtt
[+48.699s] SPIFFS: mqttPassword = **removed**
[+48.706s] SPIFFS: mqttTlsEnabled = 0
[+48.712s] SPIFFS: mqttFingerprint =
[+48.719s] SPIFFS: haspNode = prisesalleamang
[+48.725s] SPIFFS: groupName = SalleManger
[+48.742s] SPIFFS: configUser = admin
[+48.753s] SPIFFS: configPassword =
[+48.761s] SPIFFS: hassDiscovery = homeassistant
[+48.768s] SPIFFS: nextionBaud = 115200
[+48.773s] SPIFFS: nextionMaxPages = 11
[+48.783s] SPIFFS: motionPinConfig = 0
[+48.799s] SPIFFS: debugSerialEnabled = 1
[+48.806s] SPIFFS: debugTelnetEnabled = 1
[+48.813s] SPIFFS: mdnsEnabled = 1
[+48.819s] SPIFFS: beepEnabled = 0
[+48.826s] SPIFFS: ignoreTouchWhenOff = 0
[+48.864s] SPIFFS: file:/config.json line:1 data:{"mqttServer":"192.168.2.84","mqttPort":"1883","mqttUser":"mqtt","mqttPassword":"**removed**","mqttTlsEnabled":false,"mqttFingerprint":"","haspNode":"prisesalleamang","groupName":"SalleManger","configUser":"admin","configPassword":"","hassDiscovery":"homeassistant","nextionBaud":"115200","nextionMaxPages":11,"motionPinConfig":"0","debugSerialEnabled":true,"debugTelnetEnabled":true,"mdnsEnabled":true,"beepEnabled":false,"ignoreTouchWhenOff":false}
[+48.942s] SPIFFS: file:/config.json line:2 data:
[+48.949s] SPIFFS: file:/config.json line:3 data:
[+48.959s] MQTT IN: 'hasp/prisesalleamang/command/nextionbaud' : '115200'
[+48.971s] HMI OUT: bauds=115200
[+48.977s] SPIFFS: Saving config
[+48.983s] SPIFFS: mqttServer = 192.168.2.84
[+48.991s] SPIFFS: mqttPort = 1883
[+48.998s] SPIFFS: mqttUser = mqtt
[+49.005s] SPIFFS: mqttPassword = **removed**
[+49.013s] SPIFFS: mqttTlsEnabled = 0
[+49.020s] SPIFFS: mqttFingerprint =
[+49.024s] SPIFFS: haspNode = prisesalleamang
[+49.041s] SPIFFS: groupName = SalleManger
[+49.056s] SPIFFS: configUser = admin
[+49.062s] SPIFFS: configPassword =
[+49.068s] SPIFFS: hassDiscovery = homeassistant
[+49.084s] SPIFFS: nextionBaud = 115200
[+49.135s] SPIFFS: nextionMaxPages = 11
[+49.141s] SPIFFS: motionPinConfig = 0
[+49.148s] SPIFFS: debugSerialEnabled = 1
[+49.155s] SPIFFS: debugTelnetEnabled = 1
[+49.165s] SPIFFS: mdnsEnabled = 1
[+49.171s] SPIFFS: beepEnabled = 0
[+49.176s] SPIFFS: ignoreTouchWhenOff = 0
[+49.216s] SPIFFS: file:/config.json line:1 data:{"mqttServer":"192.168.2.84","mqttPort":"1883","mqttUser":"mqtt","mqttPassword":"**removed**","mqttTlsEnabled":false,"mqttFingerprint":"","haspNode":"prisesalleamang","groupName":"SalleManger","configUser":"admin","configPassword":"","hassDiscovery":"homeassistant","nextionBaud":"115200","nextionMaxPages":11,"motionPinConfig":"0","debugSerialEnabled":true,"debugTelnetEnabled":true,"mdnsEnabled":true,"beepEnabled":false,"ignoreTouchWhenOff":false}
[+49.295s] SPIFFS: file:/config.json line:2 data:
[+49.303s] SPIFFS: file:/config.json line:3 data:
[+49.311s]
[+49.326s] MQTT: [ERROR] Failed to parse incoming JSON command with error:NoMemory memoryUsage: 0 capacity: 0
[+49.339s] MQTT IN: 'hasp/prisesalleamang/command/json' : '["p[1].b[1].pco=65535","p[2].b[1].pco2=65535","p[3].b[1].pco2=65535","p[4].b[1].pco2=65535","p[5].b[1].pco2=65535","p[6].b[1].pco2=65535","p[7].b[1].pco2=65535","p[8].b[1].pco2=65535","p[9].b[1].pco2=65535","p[10].b[1].pco2=65535","p[11].b[1].pco2=65535","p[1].b[2].pco2=65535","p[2].b[2].pco=65535","p[3].b[2].pco2=65535","p[4].b[2].pco2=65535","p[5].b[2].pco2=65535","p[6].b[2].pco2=65535","p[7].b[2].pco2=65535","p[8].b[2].pco2=65535","p[9].b[2].pco2=65535","p[10].b[2].pco2=65535","p[11].b[2].pco2=65535","p[1].b[3].pco2=65535","p[2].b[3].pco2=65535","p[3].b[3].pco=65535","p[4].b[3].pco2=65535","p[5].b[3].pco2=65535","p[6].b[3].pco2=65535","p[7].b[3].pco2=65535","p[8].b[3].pco2=65535","p[9].b[3].pco2=65535","p[10].b[3].pco2=65535","p[11].b[3].pco2=65535"]'
[+49.477s] HMI OUT: p[1].b[1].pco=65535
[+50.483s] HMI ERROR: Nextion Ack timeout
[+50.489s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+50.507s] HMI OUT: p[2].b[1].pco2=65535
[+51.515s] HMI ERROR: Nextion Ack timeout
[+51.521s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+51.534s] HMI OUT: p[3].b[1].pco2=65535
[+52.540s] HMI ERROR: Nextion Ack timeout
[+52.546s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+52.559s] HMI OUT: p[4].b[1].pco2=65535
[+53.566s] HMI ERROR: Nextion Ack timeout
[+53.572s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+53.586s] HMI OUT: p[5].b[1].pco2=65535
[+54.591s] HMI ERROR: Nextion Ack timeout
[+54.597s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+54.610s] HMI OUT: p[6].b[1].pco2=65535
[+55.615s] HMI ERROR: Nextion Ack timeout
[+55.621s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+55.636s] HMI OUT: p[7].b[1].pco2=65535
[+56.643s] HMI ERROR: Nextion Ack timeout
[+56.649s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+56.663s] HMI OUT: p[8].b[1].pco2=65535
[+57.671s] HMI ERROR: Nextion Ack timeout
[+57.677s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+57.692s] HMI OUT: p[9].b[1].pco2=65535
[+58.699s] HMI ERROR: Nextion Ack timeout
[+58.705s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+58.720s] HMI OUT: p[10].b[1].pco2=65535
[+59.731s] HMI ERROR: Nextion Ack timeout
[+59.737s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+59.751s] HMI OUT: p[11].b[1].pco2=65535
[+60.758s] HMI ERROR: Nextion Ack timeout
[+60.764s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+60.778s] HMI OUT: p[1].b[2].pco2=65535
[+61.785s] HMI ERROR: Nextion Ack timeout
[+61.791s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+61.806s] HMI OUT: p[2].b[2].pco=65535
[+62.811s] HMI ERROR: Nextion Ack timeout
[+62.817s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+62.831s] HMI OUT: p[3].b[2].pco2=65535
[+63.838s] HMI ERROR: Nextion Ack timeout
[+63.844s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+63.858s] HMI OUT: p[4].b[2].pco2=65535
[+64.882s] HMI ERROR: Nextion Ack timeout
[+64.888s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+64.901s] HMI OUT: p[5].b[2].pco2=65535
[+65.908s] HMI ERROR: Nextion Ack timeout
[+65.914s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+65.927s] HMI OUT: p[6].b[2].pco2=65535
[+66.934s] HMI ERROR: Nextion Ack timeout
[+66.940s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+66.953s] HMI OUT: p[7].b[2].pco2=65535
[+67.960s] HMI ERROR: Nextion Ack timeout
[+67.966s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+67.979s] HMI OUT: p[8].b[2].pco2=65535
[+68.985s] HMI ERROR: Nextion Ack timeout
[+68.991s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+69.004s] HMI OUT: p[9].b[2].pco2=65535
[+70.023s] HMI ERROR: Nextion Ack timeout
[+70.029s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+70.042s] HMI OUT: p[10].b[2].pco2=65535
[+71.052s] HMI ERROR: Nextion Ack timeout
[+71.058s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+71.071s] HMI OUT: p[11].b[2].pco2=65535
[+72.078s] HMI ERROR: Nextion Ack timeout
[+72.084s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+72.098s] HMI OUT: p[1].b[3].pco2=65535
[+73.103s] HMI ERROR: Nextion Ack timeout
[+73.109s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+73.122s] HMI OUT: p[2].b[3].pco2=65535
[+74.129s] HMI ERROR: Nextion Ack timeout
[+74.135s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+74.148s] HMI OUT: p[3].b[3].pco=65535
[+75.155s] HMI ERROR: Nextion Ack timeout
[+75.161s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+75.174s] HMI OUT: p[4].b[3].pco2=65535
[+76.182s] HMI ERROR: Nextion Ack timeout
[+76.188s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+76.201s] HMI OUT: p[5].b[3].pco2=65535
[+77.206s] HMI ERROR: Nextion Ack timeout
[+77.212s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+77.225s] HMI OUT: p[6].b[3].pco2=65535
[+78.232s] HMI ERROR: Nextion Ack timeout
[+78.238s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+78.252s] HMI OUT: p[7].b[3].pco2=65535
[+79.258s] HMI ERROR: Nextion Ack timeout
[+79.264s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+79.277s] HMI OUT: p[8].b[3].pco2=65535
[+80.284s] HMI ERROR: Nextion Ack timeout
[+80.290s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+80.303s] HMI OUT: p[9].b[3].pco2=65535
[+81.310s] HMI ERROR: Nextion Ack timeout
[+81.316s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+81.330s] HMI OUT: p[10].b[3].pco2=65535
[+82.337s] HMI ERROR: Nextion Ack timeout
[+82.343s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+82.358s] HMI OUT: p[11].b[3].pco2=65535
[+83.363s] HMI ERROR: Nextion Ack timeout
[+83.369s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+83.381s] MQTT IN: 'hasp/prisesalleamang/command/json' : '["p[1].b[1].bco=0","p[2].b[1].bco2=0","p[3].b[1].bco2=0","p[4].b[1].bco2=0","p[5].b[1].bco2=0","p[6].b[1].bco2=0","p[7].b[1].bco2=0","p[8].b[1].bco2=0","p[9].b[1].bco2=0","p[10].b[1].bco2=0","p[11].b[1].bco2=0","p[1].b[2].bco2=0","p[2].b[2].bco=0","p[3].b[2].bco2=0","p[4].b[2].bco2=0","p[5].b[2].bco2=0","p[6].b[2].bco2=0","p[7].b[2].bco2=0","p[8].b[2].bco2=0","p[9].b[2].bco2=0","p[10].b[2].bco2=0","p[11].b[2].bco2=0","p[1].b[3].bco2=0","p[2].b[3].bco2=0","p[3].b[3].bco=0","p[4].b[3].bco2=0","p[5].b[3].bco2=0","p[6].b[3].bco2=0","p[7].b[3].bco2=0","p[8].b[3].bco2=0","p[9].b[3].bco2=0","p[10].b[3].bco2=0","p[11].b[3].bco2=0"]'
[+83.498s] HMI OUT: p[1].b[1].bco=0
[+84.502s] HMI ERROR: Nextion Ack timeout
[+84.508s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+84.523s] HMI OUT: p[2].b[1].bco2=0
[+85.531s] HMI ERROR: Nextion Ack timeout
[+85.537s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+85.552s] HMI OUT: p[3].b[1].bco2=0
[+86.558s] HMI ERROR: Nextion Ack timeout
[+86.564s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+86.578s] HMI OUT: p[4].b[1].bco2=0
[+87.589s] HMI ERROR: Nextion Ack timeout
[+87.595s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+87.610s] HMI OUT: p[5].b[1].bco2=0
[+88.617s] HMI ERROR: Nextion Ack timeout
[+88.623s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+88.637s] HMI OUT: p[6].b[1].bco2=0
[+89.642s] HMI ERROR: Nextion Ack timeout
[+89.648s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+89.662s] HMI OUT: p[7].b[1].bco2=0
[+90.673s] HMI ERROR: Nextion Ack timeout
[+90.679s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+90.692s] HMI OUT: p[8].b[1].bco2=0
[+91.698s] HMI ERROR: Nextion Ack timeout
[+91.704s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+91.718s] HMI OUT: p[9].b[1].bco2=0
[+92.724s] HMI ERROR: Nextion Ack timeout
[+92.730s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+92.743s] HMI OUT: p[10].b[1].bco2=0
[+93.749s] HMI ERROR: Nextion Ack timeout
[+93.755s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+93.768s] HMI OUT: p[11].b[1].bco2=0
[+94.774s] HMI ERROR: Nextion Ack timeout
[+94.780s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+94.793s] HMI OUT: p[1].b[2].bco2=0
[+95.799s] HMI ERROR: Nextion Ack timeout
[+95.805s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+95.818s] HMI OUT: p[2].b[2].bco=0
[+96.824s] HMI ERROR: Nextion Ack timeout
[+96.830s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+96.843s] HMI OUT: p[3].b[2].bco2=0
[+97.851s] HMI ERROR: Nextion Ack timeout
[+97.857s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+97.871s] HMI OUT: p[4].b[2].bco2=0
[+98.877s] HMI ERROR: Nextion Ack timeout
[+98.883s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+98.896s] HMI OUT: p[5].b[2].bco2=0
[+99.906s] HMI ERROR: Nextion Ack timeout
[+99.912s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+99.925s] HMI OUT: p[6].b[2].bco2=0
[+100.931s] HMI ERROR: Nextion Ack timeout
[+100.937s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+100.950s] HMI OUT: p[7].b[2].bco2=0
[+101.958s] HMI ERROR: Nextion Ack timeout
[+101.964s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+101.978s] HMI OUT: p[8].b[2].bco2=0
[+102.985s] HMI ERROR: Nextion Ack timeout
[+102.991s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+103.004s] HMI OUT: p[9].b[2].bco2=0
[+104.010s] HMI ERROR: Nextion Ack timeout
[+104.016s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+104.029s] HMI OUT: p[10].b[2].bco2=0
[+105.035s] HMI ERROR: Nextion Ack timeout
[+105.041s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+105.054s] HMI OUT: p[11].b[2].bco2=0
[+106.081s] HMI ERROR: Nextion Ack timeout
[+106.087s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+106.100s] HMI OUT: p[1].b[3].bco2=0
[+107.106s] HMI ERROR: Nextion Ack timeout
[+107.112s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+107.125s] HMI OUT: p[2].b[3].bco2=0
[+108.131s] HMI ERROR: Nextion Ack timeout
[+108.137s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+108.150s] HMI OUT: p[3].b[3].bco=0
[+109.156s] HMI ERROR: Nextion Ack timeout
[+109.162s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+109.175s] HMI OUT: p[4].b[3].bco2=0
[+110.181s] HMI ERROR: Nextion Ack timeout
[+110.187s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+110.200s] HMI OUT: p[5].b[3].bco2=0
[+111.207s] HMI ERROR: Nextion Ack timeout
[+111.213s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+111.226s] HMI OUT: p[6].b[3].bco2=0
[+112.233s] HMI ERROR: Nextion Ack timeout
[+112.239s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+112.252s] HMI OUT: p[7].b[3].bco2=0
[+113.258s] HMI ERROR: Nextion Ack timeout
[+113.264s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+113.277s] HMI OUT: p[8].b[3].bco2=0
[+114.283s] HMI ERROR: Nextion Ack timeout
[+114.289s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+114.303s] HMI OUT: p[9].b[3].bco2=0
[+115.307s] HMI ERROR: Nextion Ack timeout
[+115.313s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+115.328s] HMI OUT: p[10].b[3].bco2=0
[+116.334s] HMI ERROR: Nextion Ack timeout
[+116.340s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'
[+116.355s] HMI OUT: p[11].b[3].bco2=0
[+117.360s] HMI ERROR: Nextion Ack timeout
[+117.366s] MQTT OUT: 'hasp/prisesalleamang/state/json' : '{"event":"nextionError","value":"Nextion Ack timeout"}'

The lines between +83.381s and +117.366s kept repeating.

[SylvainGa]

If you're not connecting to WiFi

It did connect to the wifi after a reboot. It's stucked at Wifi Connected/MQTT Connected page

[SylvainGa]

Looks like I'll need to figure out why the communication with the panel ain't working. What's odd is when I press a button, the whole button lights up to acknowledge the press but it looks like it doesn't reach the ESP8266.

[aderusha]

Yup, that looks like TX from the LCD heading to RX on the WeMos isn't making it there for some reason. The screen flash is local to the display.

[SylvainGa]

A strand of the RX from the WeMos was touching the 5V line. It's fine now. I have a question about dimming the screen but I'll start its own thread for that one. Thanks for your help.