Update 5.4-2.3.x-imx up to v5.4.117 #330
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 1d7ba01 upstream. From [1] "GCC 10 (PR 91233) won't silently allow registers that are not architecturally available to be present in the clobber list anymore, resulting in build failure for mips*r6 targets in form of: ... .../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target 146 | __asm__ volatile ( \ | ^~~~~~~ This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension. This patch provides the alternative clobber list for r6 targets that won't include those registers." Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to build for mips r6 cpus with gcc 10 for the same reason as glibc. [1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8 [2] '24640f233b46 ("mips: Add support for generic vDSO")' Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a1c130 upstream. The following problem has been reported by George Kennedy: Since commit 7fef431 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d Freescale#1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6998a88 upstream. Commit 1a1c130 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") attempted to address an issue with reserving the memory occupied by ACPI tables, but it broke the initrd-based table override mechanism relied on by multiple users. To restore the initrd-based ACPI table override functionality, move the acpi_boot_table_init() invocation in setup_arch() on x86 after the acpi_table_upgrade() one. Fixes: 1a1c130 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd78980 upstream. Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e6026f upstream. The Intel I211 Ethernet Controller supports 2 Receive Side Scaling (RSS) queues. It should not be excluded from having this feature enabled. Via commit c883de9 ("igb: rename igb define to be more generic") E1000_MRQC_ENABLE_RSS_4Q was renamed to E1000_MRQC_ENABLE_RSS_MQ to indicate that this is a generic bit flag to enable queues and not a flag that is specific to devices that support 4 queues The bit flag enables 2, 4 or 8 queues appropriately depending on the part. Tested with a multicore CPU and frames were then distributed as expected. This issue appears to have been introduced because of confusion caused by the prior name. Signed-off-by: Nick Lowe <nick.lowe@gmail.com> Tested-by: David Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2800aad upstream. It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs disabled (e.g. from LED core). We can't enable BHs in such a situation. Turn the unconditional BH-enable/BH-disable code into hardirq-disable/conditional-enable. This fixes the warning below. WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 Freescale#7 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e RSP: 0018:ffffafd580b13298 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001 FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_bh+0x1f/0x30 iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi] iwl_trans_send_cmd+0x88/0x170 [iwlwifi] ? lock_acquire+0x277/0x3d0 iwl_mvm_send_cmd+0x32/0x80 [iwlmvm] iwl_mvm_led_set+0xc2/0xe0 [iwlmvm] ? led_trigger_event+0x46/0x70 led_trigger_event+0x46/0x70 ieee80211_do_open+0x5c5/0xa20 [mac80211] ieee80211_open+0x67/0x90 [mac80211] __dev_open+0xd4/0x150 __dev_change_flags+0x19e/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x30d/0x1230 ? lock_is_held_type+0xb4/0x120 ? __nla_validate_parse.part.7+0x57/0xcb0 ? __lock_acquire+0x2e1/0x1a50 __rtnl_newlink+0x560/0x910 ? __lock_acquire+0x2e1/0x1a50 ? __lock_acquire+0x2e1/0x1a50 ? lock_acquire+0x277/0x3d0 ? sock_def_readable+0x5/0x290 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? sock_def_readable+0xb3/0x290 ? lock_release+0x166/0x2a0 ? lock_is_held_type+0x90/0x120 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x25c/0x470 ? netlink_deliver_tap+0x97/0x3e0 ? validate_linkmsg+0x350/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x336/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ed/0x250 ? copy_msghdr_from_user+0x5c/0x90 ___sys_sendmsg+0x88/0xd0 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? lock_release+0x166/0x2a0 ? __fget_files+0xfe/0x1d0 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 ? lockdep_hardirqs_on_prepare+0xd9/0x170 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc605c9572d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000 irq event stamp: 170785 hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90 softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3 Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm Signed-off-by: Jari Ruusu <jariruusu@protonmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9b34dd upstream. The negation logic for the case where the off_reg is sitting in the dst register is not correct given then we cannot just invert the add to a sub or vice versa. As a fix, perform the final bitwise and-op unconditionally into AX from the off_reg, then move the pointer from the src to dst and finally use AX as the source for the original pointer arithmetic operation such that the inversion yields a correct result. The single non-AX mov in between is possible given constant blinding is retaining it as it's not an immediate based operation. Fixes: 979d63d ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 801c605 upstream. The current implemented mechanisms to mitigate data disclosure under speculation mainly address stack and map value oob access from the speculative domain. However, Piotr discovered that uninitialized BPF stack is not protected yet, and thus old data from the kernel stack, potentially including addresses of kernel structures, could still be extracted from that 512 bytes large window. The BPF stack is special compared to map values since it's not zero initialized for every program invocation, whereas map values /are/ zero initialized upon their initial allocation and thus cannot leak any prior data in either domain. In the non-speculative domain, the verifier ensures that every stack slot read must have a prior stack slot write by the BPF program to avoid such data leaking issue. However, this is not enough: for example, when the pointer arithmetic operation moves the stack pointer from the last valid stack offset to the first valid offset, the sanitation logic allows for any intermediate offsets during speculative execution, which could then be used to extract any restricted stack content via side-channel. Given for unprivileged stack pointer arithmetic the use of unknown but bounded scalars is generally forbidden, we can simply turn the register-based arithmetic operation into an immediate-based arithmetic operation without the need for masking. This also gives the benefit of reducing the needed instructions for the operation. Given after the work in 7fedb63 ("bpf: Tighten speculative pointer arithmetic mask"), the aux->alu_limit already holds the final immediate value for the offset register with the known scalar. Thus, a simple mov of the immediate to AX register with using AX as the source for the original instruction is sufficient and possible now in this case. Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel test robot reports a link error when the stm driver is a loadable module on any v5.4 kernel: > ERROR: "__memcat_p" [drivers/hwtracing/stm/stm_core.ko] undefined! This was fixed in mainline with commit 7273ad2 ("kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y"), which is fairly intrusive. Fix the v5.4 specific issue with a minimal subset of that patch, linking only the failing object into the kernel. Kernels before v4.20 are not affected. Reported-by: kernel test robot <lkp@intel.com> Link: https://groups.google.com/g/clang-built-linux/c/H-PrABqYShg Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7020bb upstream. Analogically to what we did in 2800aad ("iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same contexts. Reported-by: Heiner Kallweit <hkallweit1@gmail.com Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm Signed-off-by: Jari Ruusu <jariruusu@protonmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f221188 ] Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 671b60c ] Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6). The root cause is a missing pointer dereference which causes an array element address to be used as PID. Fix this by extracting the PID. Output before: # ./perf ftrace -v -- ls function_graph tracer is used write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument failed to set ftrace pid # Output after: ./perf ftrace -v -- ls function_graph tracer is used # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 4) | rcu_read_lock_sched_held() { 4) 0.552 us | rcu_lockdep_current_cpu_online(); 4) 6.124 us | } Reported-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 64f40f9 upstream. ToneLab EX guitar pedal device requires the same quirk like ToneLab ST for supporting the MIDI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f23fe3 upstream. This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca91fd8 upstream. Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6759e18 upstream. On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb14dd1 upstream. We introduced a few new error paths, but we can't return directly, we first have to unlock "hba->clk_scaling_lock" first. Fixes: a276c19 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountain Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 708fa01 upstream. Commit 146d62e ("ovl: detect overlapping layers") made sure we don't have overlapping layers, but it also broke the arguably valid use case of mount -olowerdir=/,upperdir=/subdir,.. where upperdir overlaps lowerdir on the same filesystem. This has been causing regressions. Revert the check, but only for the specific case where upperdir and/or workdir are subdirectories of lowerdir. Any other overlap (e.g. lowerdir is subdirectory of upperdir, etc) case is crazy, so leave the check in place for those. Overlaps are detected at lookup time too, so reverting the mount time check should be safe. Fixes: 146d62e ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v5.2 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08ef1af upstream. Currently, the lockdown state is queried unconditionally, even though its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in attr.sample_type. While that doesn't matter in case of the Lockdown LSM, it causes trouble with the SELinux's lockdown hook implementation. SELinux implements the locked_down hook with a check whether the current task's type has the corresponding "lockdown" class permission ("integrity" or "confidentiality") allowed in the policy. This means that calling the hook when the access control decision would be ignored generates a bogus permission check and audit record. Fix this by checking sample_type first and only calling the hook when its result would be honored. Fixes: b0c8fdc ("lockdown: Lock down perf when in confidentiality mode") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paul Moore <paul@paul-moore.com> Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2b12db upstream. VFIO_IOMMU_TYPE1 does not compile with !MMU: ../drivers/vfio/vfio_iommu_type1.c: In function 'follow_fault_pfn': ../drivers/vfio/vfio_iommu_type1.c:536:22: error: implicit declaration of function 'pte_write'; did you mean 'vfs_write'? [-Werror=implicit-function-declaration] So require it. Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <0-v1-02cb5500df6e+78-vfio_no_mmu_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Link: https://lore.kernel.org/r/20210505112324.729798712@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.4.117 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
otavio
pushed a commit
that referenced
this pull request
Oct 9, 2024
commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
angolini
pushed a commit
to angolini/linux-fslc
that referenced
this pull request
Oct 10, 2024
commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 Freescale#6 will wait on CPU0 Freescale#1, CPU0 Freescale#8 will wait on CPU2 Freescale#3, and CPU2 Freescale#7 will wait on CPU1 Freescale#4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip Freescale#330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> Freescale#3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> Freescale#2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> Freescale#1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
imx_v8_defconfig) and arm32 (imx_v7_defconfig).-- andrey