added example config file, authors, and modified readme.

git-svn-id: svn+ssh://svn.code.sf.net/p/spacenav/code/tags/spacenavd/spacenavd-0.5@112 ef983eb1-d774-4af8-acfd-baaf7b16a646

AUTHORS

@@ -0,0 +1,8 @@
+Main author and maintainer:
+	John Tsiombikas <nuclear@member.fsf.org>
+
+Serial device support (libsball):
+	John E. Stone <j.stone@acm.org>	
+
+Minor fixes:
+	Doug LaRue, Krister Svanlun, Hans Meine, Jaroslaw Bulat, Pavel Frolov

README

@@ -44,6 +44,7 @@ spacenavd - 0.5
   use the graphical spnavcfg program to interactively set any of these options.
   The daemon should respond immediately to your changes, and also the
   configuration file should be updated automatically.
+  An example configuration file is included in the doc subdirectory.
 
 6. Troubleshooting
   If you're having trouble running spacenavd, read the up to date FAQ on the

doc/example-spnavrc

@@ -0,0 +1,42 @@
+# This is an example configuration file for spacenavd. Uncomment and change
+# any settings you need and copy it to /etc/spnavrc.
+#
+# Note that it's much easier to configure sensitivities and figure out axis
+# reversals by using the interactive configure utility "spnavcfg", which lets
+# you fiddle with all the settings and see the result immediately.
+#
+# Lines that start with a `#' are comments, and are ignored by spacenavd.
+
+
+# Sensitivity is multiplied with every motion (1.0 normal).
+#sensitivity = 1.0
+
+
+# Separate sensitivity for rotation and translation.
+#sensitivity-translation = 1.0
+#sensitivity-rotation = 1.0
+
+
+# Dead zone; any motion less than this number is discarded as noise.
+#dead-zone = 2
+
+
+# Selectively invert translation and rotation axes. Valid values are
+# combinations of the letters x, y, and z.
+#invert-rot = yz
+#invert-trans = yz
+
+
+# Swap Y and Z axes
+#swap-yz = false
+
+
+# Serial device
+# Set this only if you have a serial device, and make sure you specify the
+# correct device file. If you do set this option, any USB devices will be
+# ignored!
+#serial = /dev/ttyS0
+
+
+# Enable/disable LED light (for devices that have one).
+#led = on