-
-
Notifications
You must be signed in to change notification settings - Fork 693
Infrared
Filetype: IR signals file
Version: 1
#
name: Button_1
type: parsed
protocol: NECext
address: EE 87 00 00
command: 5D A0 00 00
#
name: Button_2
type: raw
frequency: 38000
duty_cycle: 0.330000
data: 504 3432 502 483 500 484 510 502 502 482 501 485 509 1452 504 1458 509 1452 504 481 501 474 509 3420 503
#
name: Button_3
type: parsed
protocol: SIRC
address: 01 00 00 00
command: 15 00 00 00
Filename extension: .ir
This file format is used to store an infrared remote that consists of an arbitrary number of buttons.
Each button is separated from others by a comment character (#
) for better readability.
Known protocols are represented in the parsed
form, whereas non-recognized signals may be saved and re-transmitted as raw
data.
- Initial version.
Name | Use | Type | Description |
---|---|---|---|
name | both | string | Name of the button. Only printable ASCII characters are allowed. |
type | both | string | Type of the signal. Must be parsed or raw . |
protocol | parsed | string | Name of the infrared protocol. Refer to ir console command for the complete list of supported protocols. |
address | parsed | hex | Payload address. Must be 4 bytes long. |
command | parsed | hex | Payload command. Must be 4 bytes long. |
frequency | raw | uint32 | Carrier frequency, in Hertz, usually 38000 Hz. |
duty_cycle | raw | float | Carrier duty cycle, usually 0.33. |
data | raw | uint32 | Raw signal timings, in microseconds between logic level changes. Individual elements must be space-separated. Maximum timings amount is 1024. |
Filename extension: .ir
This file format is used to store universal remote libraries. It is identical to the previous format, differing only in the Filetype
field.
It also has predefined button names for each universal library type, so that the universal remote application can understand them.
See Universal Remotes for more information.
- Initial version.
See Infrared Unit Tests for various examples.
Filename extension: .irtest
This file format is used to store technical test data that is too large to keep directly in the firmware. It is mostly similar to the two previous formats, with the main difference being the addition of the parsed signal arrays.
Each infrared protocol must have corresponding unit tests complete with an .irtest
file.
Known protocols are represented in the parsed_array
form, whereas raw data has the raw
type.
Note: a single parsed signal must be represented as an array of size 1.
- Initial version.
Name | Use | Type | Description |
---|---|---|---|
name | both | string | Name of the signal. Only printable ASCII characters are allowed. |
type | both | string | Type of the signal. Must be parsed_array or raw . |
count | parsed_array | uint32 | The number of parsed signals in an array. Must be at least 1. |
protocol | parsed_array | string | Same as in previous formats. |
address | parsed_array | hex | Ditto. |
command | parsed_array | hex | Ditto. |
repeat | parsed_array | bool | Indicates whether the signal is a repeated button press. |
frequency | raw | uint32 | Same as in previous formats. |
duty_cycle | raw | float | Ditto. |
data | raw | uint32 | Ditto. |
The signal names in an .irtest
file follow a convention <name><test_number>
, where the name is one of:
- decoder_input
- decoder_expected
- encoder_decoder_input,
and the number is a sequential integer: 1, 2, 3, etc., which produces names like decoder_input1
, encoder_decoder_input3
, and so on.
Name | Type | Description |
---|---|---|
decoder_input | raw | A raw signal containing the decoder input. Also used as the expected encoder output. |
decoder_expected | parsed_array | An array of parsed signals containing the expected decoder output. Also used as the encoder input. |
encoder_decoder_input | parsed_array | An array of parsed signals containing both the encoder-decoder input and expected output. |
See Unit Tests for more info.