BlueRetroRoot

Root repository to sync esp-idf and BlueRetro version

See BlueRetro repo for main projet infomation.

Development instructions

Instructions for Ubuntu 20.04+
Instructions for macOS 13+
Instructions for Windows 10+

These instructions likely mostly apply for older version and/or different distribution as well. But they are not tested, so YMMV and you're on your own.

BlueRetro development on Ubuntu 20.04+

1 - Initial setup

1.1 - Install ESP-IDF Prerequisites

1. Open a Terminal (like gnome-terminal or konsole).
2. Do the following command:

   sudo apt-get install git wget flex bison gperf python3 python3-pip python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0

1.2 - BlueRetro code checkout

1. Open a Terminal (like gnome-terminal or konsole).
2. Do the following commands:

   cd ~
   git clone https://github.com/darthcloud/BlueRetroRoot.git
   cd ~/BlueRetroRoot/
   git submodule update --init --recursive
   cd esp-idf
   export IDF_TOOLS_PATH=$HOME/BlueRetroRoot/
   ./install.sh

2 - Compiling BlueRetro firmware

1. Open a Terminal (like gnome-terminal or konsole).
2. Do the following commands:

   cd ~/BlueRetroRoot/
   . ./blueretro_dev.sh
   cd BlueRetro
   # Replace configs/hw1/universal by any other config you may wish
   cp configs/hw1/universal sdkconfig
   idf.py build
   # Replace serial device with your own
   idf.py -p /dev/ttyUSB0 flash
   idf.py -p /dev/ttyUSB0 monitor

ESP32 embedded development tips

Dump spiffs

esptool.py --chip esp32 read_flash 0x310000 0xF0000 spiffs.bin
mkspiffs.exe -u spiffs_unpack -b 4096 -p 256 -s 0xF0000 .\spiffs.bin

Delete spiffs

esptool.py erase_region 0x310000 0xF0000

QEMU

(cd build; esptool.py --chip esp32 merge_bin --fill-flash-size 4MB -o flash_image.bin @flash_args)

qemu-system-xtensa -machine esp32 -drive file=build/flash_image.bin,if=mtd,format=raw -serial tcp::5555,server,nowait -display none -daemonize

Running GitHub action offline

Using github.com/nektos/act

Checkout main repo separately, then:

act -W .github/workflows/quick.yml --input hw_version=hw1 --input br_config=universal --artifact-server-path /tmp