Conversation
Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com>
…ated: IthacaAccount
…thacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com>
…ated: IthacaAccount
…ated: IthacaAccount
…ated: IthacaAccount
* feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * .
* feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com>
…ated: Orchestrator,SimpleFunder,Simulator
Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine
Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com>
CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com>
Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com>
Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com>
* feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com>
Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting.
Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes.
![sourcery-ai[bot]](https://avatars.githubusercontent.com/in/48477?s=60&v=4){kind=small}
There was a problem hiding this comment.
Sorry @Dargon789, your pull request is larger than the review limit of 150000 diff characters
✅ Snyk checks have passed. No issues have been found so far.
💻 Catch issues earlier using the plugins for VS Code, JetBrains IDEs, Visual Studio, and Eclipse. |
![gemini-code-assist[bot]](https://avatars.githubusercontent.com/in/956858?s=60&v=4){kind=small}
There was a problem hiding this comment.
Code Review
This pull request refactors the Orchestrator and Simulator contracts to utilize calldata pointers for improved gas efficiency and overhauls the deployment system to use a registry-based JSON configuration. Significant changes include the removal of the Intent struct from the public interface and the deletion of dedicated test files for multi-signature and upgrade logic. Feedback identifies critical concerns regarding the resulting loss of test coverage and a regression in foundry.toml that affects deterministic contract bytecodes. Additionally, the removal of the Intent struct is noted as a major breaking change for off-chain tooling. Further improvements are suggested to remove committed IDE files, avoid hardcoded chain IDs in deployment scripts, and correct minor formatting regressions in environment files.
|
The latest updates on your projects. Learn more about Vercel for GitHub.
|
Dargon789
added a commit
that referenced
this pull request
Apr 20, 2026
This reverts commit cb23ac3.
Merged
Dargon789
added a commit
that referenced
this pull request
Apr 20, 2026
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
* Dargon789 legion rouge (#61) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * deploy execute_config.sh * Update forge-std * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Ithaca (#58) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Revert "Delete .idea directory (#35)" (#55) This reverts commit 512c204. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Chore bump contract versions due to bytecode changes (#60) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Legion rouge (#63) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * feat: add merkle sigs natively into the account legion rouge (#70) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * deploy execute_config.sh * Update forge-std * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#66) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#67) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#68) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Ithaca (#80) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Revert "Delete .idea directory (#35)" (#55) This reverts commit 512c204. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Delete CNAME * ci(Mergify): configuration update (#81) Signed-off-by: Dargon789 <null> * Revert "Ithaca (#58)" (#82) This reverts commit 0cb7a77. @gemini-code-assist Code Review This pull request cleans up the repository by removing various IDE-specific configuration files located in the .idea directory. Additionally, it removes the testERC20TransferViaPortoOrchestratorWithPasskey function from the BenchmarkTest contract in test/Benchmark.t.sol. I have no feedback to provide. * Update issue templates (#88) * Update issue templates * Update .github/ISSUE_TEMPLATE/feature_request.md Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/custom.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Legion (#72) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * save local changes before merge * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Add Multicall3 simulation support to Simulator Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency. * feat: add multicall to simulator (ithacaxyz#402) (#24) * feat: add multicall to simulator (ithacaxyz#402) * feat: add multicall to simulator * chore: add gas test * chore: review fixes * chore: fmt contracts and update gas snapshots * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) --------- Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> * Fix commit user email formatting in CI workflow Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "feat: add multicall to simulator (ithacaxyz#402) (#24)" (#26) This reverts commit 1aef318. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#32) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency * Legion (#38) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Add .idea configs and tweak .env comments Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting. * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Revert "Legion (#72)" (#90) This reverts commit cb23ac3. * Account (#91) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Account (#93) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Signed-off-by: Dargon789 <null> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com>
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
* feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * # Default ignored files * .snapshot_worktree * Refactor function signatures and formatting for consistency * Chore bump contract versions due to bytecode changes (#60) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Legion rouge (#63) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * feat: add merkle sigs natively into the account legion rouge (#70) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * deploy execute_config.sh * Update forge-std * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#66) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#67) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#68) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Ithaca (#80) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Revert "Delete .idea directory (#35)" (#55) This reverts commit 512c204. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Delete CNAME * ci(Mergify): configuration update (#81) Signed-off-by: Dargon789 <null> * Revert "Ithaca (#58)" (#82) This reverts commit 0cb7a77. @gemini-code-assist Code Review This pull request cleans up the repository by removing various IDE-specific configuration files located in the .idea directory. Additionally, it removes the testERC20TransferViaPortoOrchestratorWithPasskey function from the BenchmarkTest contract in test/Benchmark.t.sol. I have no feedback to provide. * Update issue templates (#88) * Update issue templates * Update .github/ISSUE_TEMPLATE/feature_request.md Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/custom.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Legion (#72) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * save local changes before merge * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Add Multicall3 simulation support to Simulator Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency. * feat: add multicall to simulator (ithacaxyz#402) (#24) * feat: add multicall to simulator (ithacaxyz#402) * feat: add multicall to simulator * chore: add gas test * chore: review fixes * chore: fmt contracts and update gas snapshots * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) --------- Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> * Fix commit user email formatting in CI workflow Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "feat: add multicall to simulator (ithacaxyz#402) (#24)" (#26) This reverts commit 1aef318. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#32) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency * Legion (#38) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Add .idea configs and tweak .env comments Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting. * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Revert "Legion (#72)" (#90) This reverts commit cb23ac3. * Account (#91) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots * Account (#93) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Signed-off-by: Dargon789 <null> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com>
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
* feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * save local changes before merge * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Add Multicall3 simulation support to Simulator Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency. * feat: add multicall to simulator (ithacaxyz#402) (#24) * feat: add multicall to simulator (ithacaxyz#402) * feat: add multicall to simulator * chore: add gas test * chore: review fixes * chore: fmt contracts and update gas snapshots * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) --------- Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> * Fix commit user email formatting in CI workflow Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "feat: add multicall to simulator (ithacaxyz#402) (#24)" (#26) This reverts commit 1aef318. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#32) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency * Legion (#38) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Add .idea configs and tweak .env comments Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting. * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com>
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
* Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#66) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#67) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#68) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * ci(Mergify): configuration update (#81) Signed-off-by: Dargon789 <null> * Revert "Ithaca (#58)" (#82) This reverts commit 0cb7a77. @gemini-code-assist Code Review This pull request cleans up the repository by removing various IDE-specific configuration files located in the .idea directory. Additionally, it removes the testERC20TransferViaPortoOrchestratorWithPasskey function from the BenchmarkTest contract in test/Benchmark.t.sol. I have no feedback to provide. * Update issue templates (#88) * Update issue templates * Update .github/ISSUE_TEMPLATE/feature_request.md Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/custom.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Legion (#72) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * save local changes before merge * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Add Multicall3 simulation support to Simulator Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency. * feat: add multicall to simulator (ithacaxyz#402) (#24) * feat: add multicall to simulator (ithacaxyz#402) * feat: add multicall to simulator * chore: add gas test * chore: review fixes * chore: fmt contracts and update gas snapshots * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) --------- Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> * Fix commit user email formatting in CI workflow Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "feat: add multicall to simulator (ithacaxyz#402) (#24)" (#26) This reverts commit 1aef318. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#32) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency * Legion (#38) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Add .idea configs and tweak .env comments Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting. * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Revert "Legion (#72)" (#90) This reverts commit cb23ac3. * Account (#93) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Create SECURITY.md for security policy (#95) (#96) * Ithaca account (#92) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * # Default ignored files * .snapshot_worktree * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Create SECURITY.md for security policy (#95) * Create SECURITY.md for security policy Added a security policy document outlining supported versions and vulnerability reporting. Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update SECURITY.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update SECURITY.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Delete .mergify.yml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Signed-off-by: Dargon789 <null> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com>
Dargon789
added a commit
that referenced
this pull request
Apr 30, 2026
* feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 * Chore bump contract versions due to bytecode changes (#60) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Legion rouge (#63) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * feat: add merkle sigs natively into the account legion rouge (#70) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * deploy execute_config.sh * Update forge-std * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#66) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#67) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#68) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Ithaca (#80) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * chore: use `auto-assign-pr.yml` org action * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Revert "Delete .idea directory (#35)" (#55) This reverts commit 512c204. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Delete CNAME * ci(Mergify): configuration update (#81) Signed-off-by: Dargon789 <null> * Revert "Ithaca (#58)" (#82) This reverts commit 0cb7a77. @gemini-code-assist Code Review This pull request cleans up the repository by removing various IDE-specific configuration files located in the .idea directory. Additionally, it removes the testERC20TransferViaPortoOrchestratorWithPasskey function from the BenchmarkTest contract in test/Benchmark.t.sol. I have no feedback to provide. * Update issue templates (#88) * Update issue templates * Update .github/ISSUE_TEMPLATE/feature_request.md Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/bug_report.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update .github/ISSUE_TEMPLATE/custom.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Legion (#72) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * save local changes before merge * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Add Multicall3 simulation support to Simulator Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency. * feat: add multicall to simulator (ithacaxyz#402) (#24) * feat: add multicall to simulator (ithacaxyz#402) * feat: add multicall to simulator * chore: add gas test * chore: review fixes * chore: fmt contracts and update gas snapshots * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) --------- Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> * Fix commit user email formatting in CI workflow Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "feat: add multicall to simulator (ithacaxyz#402) (#24)" (#26) This reverts commit 1aef318. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#32) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency * Legion (#38) * feat: add ERC20 transfer benchmark for Porto with passkey Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs. - Uses secp256k1 passkey for transaction signing - Sets execution permissions for ERC20 transfers - Requires spend limits (set to max) for passkey operations - Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits) - Provides clean measurement of passkey overhead (~19k gas) Resolves ithacaxyz#272 🤖 Generated with [Claude Code](https://claude.ai/code) Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> * feat: allow early refunds by recipient in escrow * feat: add callSansTo support to ERC7821 execute * chore: improvements and fixes to ERC7821Ithaca * chore: add address(0) replacement to new compute digest * fix: sanitize upper bits before checking replacement + tests * feat: do not add replay safe wrapper if sig is eoa * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * chore: use `auto-assign-pr.yml` org action * fix: combine improvements from PRs ithacaxyz#357, ithacaxyz#314, and ithacaxyz#379 Combines the following fixes: - PR ithacaxyz#357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker - PR ithacaxyz#314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.) - PR ithacaxyz#379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max) Co-Authored-By: GarmashAlex <noreply@github.com> Co-Authored-By: sukrucildirr <noreply@github.com> Co-Authored-By: Forostovec <noreply@github.com> 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com> * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: subaccount design using spend function * test: complete subaccount flow with unit test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * feat: fix and simplify multichain design (ithacaxyz#327) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * chore: redundant multichain bool * fix: lint * . * feat: remove intent struct (ithacaxyz#365) * feat: simplify multichain nonce design * chore: readd merkle verification prefix * chore: undo blank line addns * chore: lint * . * ~50 failing tests down to 5 * down to 1 failing test * fixed failing test * chore: remove console logs and bench * . * Update test/Base.t.sol * Update src/Orchestrator.sol * Update test/utils/mocks/MockPayerWithSignatureOptimized.sol * chore: final cleanup, rebench * Update src/Orchestrator.sol * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator * chore: cleanup * rebase * fix --------- Co-authored-by: GitHub Action <action@github.com> * feat: native merkle sig verification in Account * chore: fmt * chore: unify merkle sig flow for orchestrator multi chain intents * chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator * Add .circleci/config.yml (#1) Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow CI: Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. * Create CNAME (#9) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME * Revert "Merge branch 'master'" This reverts commit 6c02fbf, reversing changes made to a317ddb. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#10) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 3: Workflow does not contain permissions (#15) https://github.com/Dargon789/account/security/code-scanning/3 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#16) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Delete CNAME * Update Brutalizer.sol * Potential fix for code scanning alert no. 2: Workflow does not contain permissions (#17) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Refactor deployment scripts and update configs Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments. * Fix commit user email format in CI workflow (#18) 30a2096 Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Potential fix for code scanning alert no. 4: Workflow does not contain permissions (#19) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 1: Workflow does not contain permissions (#20) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Update ci.yaml (#21) reback use test CI and automation chores (ithacaxyz#394) 7dd8a5d Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Master (#22) * Merge branch 'master' (#8) * Update ci.yaml (#2) CI: Update Forge test command to use --rerun and increase verbosity to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#4) Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI: Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml (#5) Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv" Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Create CNAME --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Revert "fix vm block accoount (#11)" (#13) Reverts #11 Summary by Sourcery CI: Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f. --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Update ci.yaml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * Refactor function signatures and formatting for consistency Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made. * Delete .circleci directory (#27) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * # Default ignored files * .snapshot_worktree * Delete .idea directory (#35) Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> * pre-commit * pre-commit * deploy execute_config.sh * Update forge-std * Update check-bytecode-changes.js * pre-commit * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes * chore: bump contract versions due to bytecode changes contracts update * v0.5.11 * chore: unify merkle sig flow for orchestrator multi chain intents * test: add tests for getContextKeyHash in Account.t.sol (ithacaxyz#412) * Refactor function signatures and formatting for consistency --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Add .idea configs and tweak .env comments Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting. * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero-v2 * Update LayerZero-v2 --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * Revert "Legion (#72)" (#90) This reverts commit cb23ac3. * Account (#91) * feat: add merkle sigs natively into the account * fix: tests * test: add more sophisticated fuzz test * chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount * pre-commit * deploy execute_config.sh * Update forge-std * Normalize file modes and update forge-std submodule Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes. * Update LayerZero submodule & remove exec bits Normalize file permissions and advance submodule: change file modes from executable (100755) to non-executable (100644) for deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js. Update lib/LayerZero-v2 submodule commit from 88428755be6caa71cb1d2926141d73c8989296b5 to ab9b083410b9359285a5756807e1b6145d4711a7. * Update LayerZero-v2 * Update LayerZero-v2 --------- Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> * clear && forge fmt && forge snapshot clear && forge fmt && forge snapshot --isolate --match-contract Benchmark --via-ir && git add snapshots * Delete .mergify.yml Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> --------- Signed-off-by: Dargon789 <64915515+Dargon789@users.noreply.github.com> Signed-off-by: Dargon789 <null> Co-authored-by: Tanishk Goyal <goyaltanishk02@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: googleworkspace-bot <googleworkspace-bot@google.com> Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Tanishk Goyal <legion2002@users.noreply.github.com> Co-authored-by: o-az <omaraziz.dev@proton.me> Co-authored-by: sourcery-ai[bot] <58596630+sourcery-ai[bot]@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: howy <132113803+howydev@users.noreply.github.com> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: John Doe <jdoe@email.com> Co-authored-by: Roberto Delgado Ferrezuelo <108575058+robertodf99@users.noreply.github.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
7 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.