Carrier Board for LuckFox Core1106 Linux SBC
- All usable GPIO's are connected to 2.54mm Pin Headers (all 3.3v Logic EXCEPT Pin20 (1.8v MAX))
- ALL SMD Pads are 1.8v, EXCEPT for ENET (Ethernet)
- USB-C Programming/USB Host
- USB Mode Switch connects 3.3v & USB_VBUSDET (Enable to enter USB Device Mode, PRESS BOOT + RESET to enter Flash Mode)
- 2N2222 Transistor with ENABLE on Pin27 does same ^^^^^^ (when Pin27 is HIGH (1.8v))
- 5v pins on H6 are directly connected to USB - can be used for In/Out
- 3v3 pins are powered by "3v3" LDO (shared with 3v3SYS) (max 500ma)
- User LED connected to Pin20 (GPIO3_C6d)
- Connect Solder Pads to ENABLE