update READMEmd

README.md

@@ -1,3 +1,5 @@
+[![CC BY-NC-SA 4.0][cc-by-nc-sa-shield]][cc-by-nc-sa]
+
 # Klicky-00: Zero X,Y offset probe (WIP)
 
 Building on the amazing work of JosAr ([Klicky Probe](https://github.com/jlas1/Klicky-Probe)), whoppingpochard ([PCB Klicky](https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky)), and Majarspeed ([Unklicky](https://github.com/majarspeed/Unklicky)) this mod moves the probe directly under the nozzle (X,Y 0,0) and also has the nozzle touching the probe so that you can reliably use it as your z endstop with consistent z-offset. All the usual caveats about clean nozzles during probing apply here too.
@@ -54,8 +56,6 @@ Drift was also very low with bed temp at 118°C, nozzle 200°C and chamber ~57°
 * [Voron Docs Klicky as Z-endstop](https://docs.vorondesign.com/community/howto/Takuya/Klicky_Probe_AutoZ_Alternative.html)
 
 <br/><br/><br/><br/>
-[![CC BY-NC-SA 4.0][cc-by-nc-sa-shield]][cc-by-nc-sa]
-
 This work is licensed under a
 [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].