AtrivaTECH_PicUNO-mpy

Micropython board library with special functions and variables for PicUNO

Built-In Modules

1. board
   a) lvlset()
   Sets Level shifted GPIOs LOW since they stay high always. Best used at start of program.
   b) LED_BUILTIN [variable]
   Sets GPIO 14 as output with machine.pin and can be used to manipulate inbuilt LED Directly with LED_BUILTIN.value(0/1)
   
2. Neopixel
   Based on Adafruit's Neopixel library for thr neopixels for micropython which can be used to control neopixels. No extra library required.

Installation

Download the picuno.py file from /picuno and upload it to the root folder of your PicUNO via the file manager in Thonny. Then use the below method at the start of the program to import the library.

from picuno import board

Sample usage:

1. Neopixel module:
   

import time
from picuno import Neopixel
numpix = 30
pixels = Neopixel(numpix, 0, 17, "GRB")
yellow = (255, 100, 0)
orange = (255, 50, 0)
green = (0, 255, 0)
blue = (0, 0, 255)
red = (255, 0, 0)
color0 = red
pixels.brightness(50)
pixels.fill(orange)
pixels.set_pixel_line_gradient(3, 13, green, blue)
pixels.set_pixel_line(14, 16, red)
pixels.set_pixel(20, (255, 255, 255))
while True:
if color0 == red:
color0 = yellow
color1 = red
else:
color0 = red
color1 = yellow
pixels.set_pixel(0, color0)
pixels.set_pixel(1, color1)
pixels.show()
time.sleep(1)

2. board Module:
   

from picuno import board
import rp2
from machine import Pin
import utime
board.lvlpins()
while True:
board.LED_BUILTIN.value(0)
utime.sleep(2)
board.LED_BUILTIN.value(1)
utime.sleep(2)
machine.Pin(2, machine.Pin.OUT).value(1)
utime.sleep(1)
machine.Pin(2, machine.Pin.OUT).value(0)
utime.sleep(1)

Credits

Code maintained by Atul Ravi-Founder It's On Group
Special Thanks to CodeItDoIt on GitHub for the addition of comments.