A CMSIS-DAP compliant debugger based on Sipeed RV-Debugger Plus.
- CMSIS-DAP V2.1
- SWD
- JTAG
- UART
- Connected & Running LED
| Function | Label | GPIO |
|---|---|---|
| JTAG_TDI | TDI | 0 |
| JTAG_TDO | TDO | 1 |
| JTAG_TMS | TMS | 2 |
| JTAG_TCK | TCK | 15 |
| SWD_SWDIO | TMS | 2 |
| SWD_SWCLK | TCK | 15 |
| nRESET | RTS | 24 |
| UART TX | TX | 26 |
| UART RX | RX | 27 |
Notice that 3.3V level I/O is required.
- Copy config files in config directory into bl_mcu_sdk/bsp/board/bl702/bl702_iot path.
- Execute command.
cd bl_mcu_sdk
make APP=usb_daplink APP_DIR=../firmware BOARD=bl702_iot
- flash download
cd bl_mcu_sdk
make download COMx=COM6
- jtag connect and debug risc-v(hpmicro hpm6750)  