longboard_shell_script

Shell Script to be placed in the Linux file system on an Arduino Yún

Do not place these files on a mounted SD card because the Shell Script will not be executable.

The shell script (send_speeds.sh) follows Ash standards (not Bash) due to the Arduino Yún having Ash built in by default.

How To Set Up

• Before you continue, you should have followed some of the steps from the Arduino GitHub Repo up until this point
• Change the values listed below under To Use
• The device details you enter in info.txt should match the device details you enter into the MySQL Table here
• In order to place these files on the Arduino, you will need a micro SD card
• First you must format the SD card. This can be done by running the ExpandingYunDiskSpace Arduino Sketch
• When this has finished, remove the micro SD card from the Arduino
• Insert the micro SD card into an SD card adapter
• Insert the adapter into your PC / Laptop
• Move these files from your PC / Laptop to the micro SD card
• Remove the micro SD card adapter from your PC / Laptop
• Remove the micro SD card from the adapter
• Insert the micro SD card into the Arduino
• Open the Terminal (Ctrl + Alt + T):
• Get the local IP Address of the Arduino from the Arduino IDE
• SSH into the Arduino using the local IP

ssh root@192.168.XXX.XXX

• Enter the password for root - Default values are arduino (Arduino) or doghunter (Linino)
• Move into the SD card directory

cd /mnt/sd

• Copy these files to the folder relative to the Arduino program

cp device_info.txt /usr/lib/python2.7/bridge
cp speeds.txt /usr/lib/python2.7/bridge
cp send_speeds.sh /usr/lib/python2.7/bridge

• Move to the same directory and make the Shell Script executable

cd /usr/lib/python2.7/bridge
chmod +x send_speeds.sh

To Use

• info.txt
  • Change {{API_URL}} to the URL of your API
  • Change {{API_KEY}} to the API key
  • Change {{DEVICE_NAME}} to the device's registered name
  • Change {{DEVICE_PASSWORD}} to the device's registered password

How It Works

• This script is called by the program running on an Arduino Yún (Arduino GitHub Repo)
• The script reads in the device name, password and the API URL and key from info.txt
• The speed logs from the skate session are read in from speeds.txt
• These values are stored in a comma-separated string (which will be turned into an array in the API)
• Every log is checked if it has been prepended with d_ which signals that this log represents the total distance of the skate
• A JSON object is created, containing:
  • The API key
  • The device name
  • The device password
  • The speed logs
  • The total distance
• The script sends the JSON object to the API via cURL/POST and awaits the response