Package typo fix

README.md

@@ -2,7 +2,7 @@
 
 CadQuery plugin to create a mesh of an assembly with corresponding data.
 
-This plugin makes use of CadQuery tags to collect surfaces into Gmsh physical groups. The
+This plugin makes use of CadQuery tags to collect surfaces into [Gmsh](https://gmsh.info/) physical groups. The
 tagged faces are matched to their corresponding surfaces in the mesh via their position in the CadQuery solid(s) vs the Gmsh surface ID. There are a few challenges with mapping tags to surfaces to be aware of.
 
 1. Each tag can select multiple faces/surfaces at once, and this has to be accounted for when mapping tags to surfaces.
@@ -11,7 +11,7 @@ tagged faces are matched to their corresponding surfaces in the mesh via their p
 
 ## Installation
 
-You can do `pip install -e .` locally in the root of this repo to enable development. Alternatively, you can install via `pip install git+git@github.com:cadquery/cadquery-assembly-mesh-plugin.git` if you have access to the repo on Github.
+You can do `pip install -e .` locally in the root of this repo to enable development. Alternatively, you can install via `pip install git+git@github.com:cadquery/assembly-mesh-plugin.git` if you have access to the repo on Github.
 
 ## Usage
 
@@ -20,10 +20,10 @@ You can do `pip install -e .` locally in the root of this repo to enable develop
 The plugin needs to be imported in order to monkey-patch its method into CadQuery:
 
 ```python
-import cadquery_assembly_mesh_plugin.plugin
+import assembly_mesh_plugin.plugin
 ```
 
-You can then tag faces in each of the assembly parts and create your asembly. To export the assembly to a mesh file, you do the following.
+You can then tag faces in each of the assembly parts and create your assembly. To export the assembly to a mesh file, you do the following.
 
 ```python
 your_assembly.assemblyToGmsh(mesh_path="tagged_mesh.msh")
@@ -38,7 +38,7 @@ Below is a simple example.
 
 ```python
 import cadquery as cq
-import cadquery_assembly_mesh_plugin.plugin
+import assembly_mesh_plugin.plugin
 
 shell = cq.Workplane("XY").box(50, 50, 50)
 shell = shell.faces(">Z").workplane().rect(21, 21).cutThruAll()
@@ -63,7 +63,7 @@ The resulting `.msh` file should have three physical groups named for tags in it
 
 These tests are also run in Github Actions, and the meshes which are generated can be viewed as artifacts on the successful `tests` Actions there.
 
-* [sample_coils.py](tests/sample_coils.py) contains generators for sample assemlies for use in testing the basic operation of this plugin. This file also contains the code to tag all faces of interest.
+* [sample_coils.py](tests/sample_coils.py) contains generators for sample assemblies for use in testing the basic operation of this plugin. This file also contains the code to tag all faces of interest.
 * [smoke_test.py](tests/smoke_test.py) runs two tests currently. The first is for a simple cross-section of a coil (image below), which makes it easier to verify basic operation. The second is for a planar coil, which forces the use of more advanced selectors, but is not as complex as a coil with a non-planar sweep path. This planar-coil test is not complete yet.
 
 Once the test has been run (using the pytest command), two mesh files (.msh extension) be created in the root of the repository.

pyproject.toml

@@ -32,5 +32,5 @@ dev = [
 ]
 
 [project.urls]
-Repository = "https://github.com/cadquery/cadquery-assembly-mesh-plugin.git"
-"Bug Tracker" = "https://github.com/cadquery/cadquery-assembly-mesh-plugin/issues"
+Repository = "https://github.com/cadquery/assembly-mesh-plugin.git"
+"Bug Tracker" = "https://github.com/cadquery/assembly-mesh-plugin/issues"