Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/…

…wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "Major changes:

   - lots of devicetree additions for existing drivers.  I tried hard to
     make sure the bindings are proper.  In more complicated cases, I
     requested acks from people having more experience with them than
     me.  That took a bit of extra time and also some time went into
     discussions with developers about what bindings are and what not.
     I have the feeling that the workflow with bindings should be
     improved to scale better.  I will spend some more thought on
     this...

   - i2c-muxes are succesfully used meanwhile, so we dropped
     EXPERIMENTAL for them and renamed the drivers to a standard pattern
     to match the rest of the subsystem.  They can also be used with
     devicetree now.

   - ixp2000 was removed since the whole platform goes away.

   - cleanups (strlcpy instead of strcpy, NULL instead of 0)

   - The rest is typical driver fixes I assume.

  All patches have been in linux-next at least since v3.4-rc6."

Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
  i2c: davinci: Free requested IRQ in remove
  i2c: ocores: register OF i2c devices
  i2c: tegra: notify transfer-complete after clearing status.
  I2C: xiic: Add OF binding support
  i2c: Rename last mux driver to standard pattern
  i2c: tegra: fix 10bit address configuration
  i2c: muxes: rename first set of drivers to a standard pattern
  of/i2c: implement of_find_i2c_adapter_by_node
  i2c: implement i2c_verify_adapter
  i2c-s3c2410: Add HDMIPHY quirk for S3C2440
  i2c-s3c2410: Rework device type handling
  i2c: muxes are not EXPERIMENTAL anymore
  i2c/of: Automatically populate i2c mux busses from device tree data.
  i2c: Add a struct device * parameter to i2c_add_mux_adapter()
  of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
  i2c: designware: Add clk_{un}prepare() support
  i2c: designware: add PM support
  i2c: ixp2000: remove driver
  i2c: pnx: add device tree support
  i2c: imx: don't use strcpy but strlcpy
  ...

Documentation/devicetree/bindings/i2c/mux.txt

@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner.  The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
+	   with two NXP pca8574 GPIO expanders attached, one each to
+	   ports 3 and 4.
+	 */
+
+	mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio1: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpio2: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};

Documentation/devicetree/bindings/i2c/samsung-i2c.txt

@@ -6,14 +6,18 @@ Required properties:
   - compatible: value should be either of the following.
       (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+          inside HDMIPHY block found on several samsung SoCs
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.
   - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-  - gpios: The order of the gpios should be the following: <SDA, SCL>.
-    The gpio specifier depends on the gpio controller.
 
 Optional properties:
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller. Required in all
+    cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+    lines are permanently wired to the respective client
   - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not

Documentation/devicetree/bindings/i2c/xiic.txt

@@ -0,0 +1,22 @@
+Xilinx IIC controller:
+
+Required properties:
+- compatible : Must be "xlnx,xps-iic-2.00.a"
+- reg : IIC register location and length
+- interrupts : IIC controller unterrupt
+- #address-cells = <1>
+- #size-cells = <0>
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+	axi_iic_0: i2c@40800000 {
+		compatible = "xlnx,xps-iic-2.00.a";
+		interrupts = < 1 2 >;
+		reg = < 0x40800000 0x10000 >;
+
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};

Documentation/i2c/muxes/gpio-i2cmux → Documentation/i2c/muxes/i2c-mux-gpio

@@ -1,11 +1,11 @@
-Kernel driver gpio-i2cmux
+Kernel driver i2c-gpio-mux
 
 Author: Peter Korsgaard <peter.korsgaard@barco.com>
 
 Description
 -----------
 
-gpio-i2cmux is an i2c mux driver providing access to I2C bus segments
+i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments
 from a master I2C bus and a hardware MUX controlled through GPIO pins.
 
 E.G.:
@@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N.
 Usage
 -----
 
-gpio-i2cmux uses the platform bus, so you need to provide a struct
+i2c-gpio-mux uses the platform bus, so you need to provide a struct
 platform_device with the platform_data pointing to a struct
 gpio_i2cmux_platform_data with the I2C adapter number of the master
 bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/gpio-i2cmux.h for details.
+to control it. See include/linux/i2c-gpio-mux.h for details.
 
 E.G. something like this for a MUX providing 4 bus segments
 controlled through 3 GPIO pins:
 
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-gpio-mux.h>
 #include <linux/platform_device.h>
 
 static const unsigned myboard_gpiomux_gpios[] = {
@@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = {
 };
 
 static struct platform_device myboard_i2cmux = {
-	.name		= "gpio-i2cmux",
+	.name		= "i2c-gpio-mux",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &myboard_i2cmux_data,

MAINTAINERS

@@ -2988,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER
 M:	Peter Korsgaard <peter.korsgaard@barco.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
-F:	drivers/i2c/muxes/gpio-i2cmux.c
-F:	include/linux/gpio-i2cmux.h
-F:	Documentation/i2c/muxes/gpio-i2cmux
+F:	drivers/i2c/muxes/i2c-mux-gpio.c
+F:	include/linux/i2c-mux-gpio.h
+F:	Documentation/i2c/muxes/i2c-mux-gpio
 
 GENERIC HDLC (WAN) DRIVERS
 M:	Krzysztof Halasa <khc@pm.waw.pl>
@@ -5148,7 +5148,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER
 M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/muxes/pca9541.c
+F:	drivers/i2c/muxes/i2c-mux-pca9541.c
 
 PCA9564/PCA9665 I2C BUS DRIVER
 M:	Wolfram Sang <w.sang@pengutronix.de>

drivers/i2c/Kconfig

@@ -49,7 +49,6 @@ config I2C_CHARDEV
 
 config I2C_MUX
 	tristate "I2C bus multiplexing support"
-	depends on EXPERIMENTAL
 	help
 	  Say Y here if you want the I2C core to support the ability to
 	  handle multiplexed I2C bus topologies, by presenting each

drivers/i2c/busses/Kconfig

@@ -445,20 +445,6 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
-config I2C_IXP2000
-	tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
-	depends on ARCH_IXP2000
-	select I2C_ALGOBIT
-	help
-	  Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
-	  system and are using GPIO lines for an I2C bus.
-
-	  This support is also available as a module. If so, the module
-	  will be called i2c-ixp2000.
-
-	  This driver is deprecated and will be dropped soon. Use i2c-gpio
-	  instead.
-
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC

drivers/i2c/busses/Makefile

@@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
-obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o

drivers/i2c/busses/i2c-davinci.c

@@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	dev->clk = NULL;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
-	free_irq(IRQ_I2C, dev);
+	free_irq(dev->irq, dev);
 	iounmap(dev->base);
 	kfree(dev);
 

drivers/i2c/busses/i2c-designware-core.c

@@ -164,20 +164,31 @@ static char *abort_sources[] = {
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 {
-	u32 value = readl(dev->base + offset);
+	u32 value;
 
-	if (dev->swab)
+	if (dev->accessor_flags & ACCESS_16BIT)
+		value = readw(dev->base + offset) |
+			(readw(dev->base + offset + 2) << 16);
+	else
+		value = readl(dev->base + offset);
+
+	if (dev->accessor_flags & ACCESS_SWAP)
 		return swab32(value);
 	else
 		return value;
 }
 
 void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
 {
-	if (dev->swab)
+	if (dev->accessor_flags & ACCESS_SWAP)
 		b = swab32(b);
 
-	writel(b, dev->base + offset);
+	if (dev->accessor_flags & ACCESS_16BIT) {
+		writew((u16)b, dev->base + offset);
+		writew((u16)(b >> 16), dev->base + offset + 2);
+	} else {
+		writel(b, dev->base + offset);
+	}
 }
 
 static u32
@@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 
 	input_clock_khz = dev->get_clk_rate_khz(dev);
 
-	/* Configure register endianess access */
 	reg = dw_readl(dev, DW_IC_COMP_TYPE);
 	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
-		dev->swab = 1;
-		reg = DW_IC_COMP_TYPE_VALUE;
-	}
-
-	if (reg != DW_IC_COMP_TYPE_VALUE) {
+		/* Configure register endianess access */
+		dev->accessor_flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit */
+		dev->accessor_flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
 		dev_err(dev->dev, "Unknown Synopsys component type: "
 			"0x%08x\n", reg);
 		return -ENODEV;

drivers/i2c/busses/i2c-designware-core.h

@@ -82,14 +82,17 @@ struct dw_i2c_dev {
 	unsigned int		status;
 	u32			abort_source;
 	int			irq;
-	int			swab;
+	u32			accessor_flags;
 	struct i2c_adapter	adapter;
 	u32			functionality;
 	u32			master_cfg;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 };
 
+#define ACCESS_SWAP		0x00000001
+#define ACCESS_16BIT		0x00000002
+
 extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
 extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
 extern int i2c_dw_init(struct dw_i2c_dev *dev);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/of_i2c.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include "i2c-designware-core.h"
@@ -95,7 +96,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 		r = -ENODEV;
 		goto err_free_mem;
 	}
-	clk_enable(dev->clk);
+	clk_prepare_enable(dev->clk);
 
 	dev->functionality =
 		I2C_FUNC_I2C |
@@ -155,7 +156,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 err_iounmap:
 	iounmap(dev->base);
 err_unuse_clocks:
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 err_free_mem:
@@ -177,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&dev->adapter);
 	put_device(&pdev->dev);
 
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 
@@ -198,6 +199,31 @@ static const struct of_device_id dw_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #endif
 
+#ifdef CONFIG_PM
+static int dw_i2c_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i_dev->clk);
+
+	return 0;
+}
+
+static int dw_i2c_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+	clk_prepare_enable(i_dev->clk);
+	i2c_dw_init(i_dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
@@ -207,6 +233,7 @@ static struct platform_driver dw_i2c_driver = {
 		.name	= "i2c_designware",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
+		.pm	= &dw_i2c_dev_pm_ops,
 	},
 };