[PATCH] Remove MODULE_PARM

MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused.  It's time to replace the last users, which are generally in the
most unloved drivers anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/networking/ray_cs.txt

@@ -25,7 +25,7 @@ the essid= string parameter is available via the kernel command line.
 This will change after the method of sorting out parameters for all
 the PCMCIA drivers is agreed upon.  If you must have a built in driver
 with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for MODULE_PARM
+/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
 will find them all.
 
 Information on card services is available at:

Documentation/sound/oss/Introduction

@@ -69,7 +69,7 @@ are available, for example IRQ, address, DMA.
 
 Warning, the options for different cards sometime use different names 
 for the same or a similar feature (dma1= versus dma16=).  As a last 
-resort, inspect the code (search for MODULE_PARM).
+resort, inspect the code (search for module_param).
 
 Notes:
 

Documentation/sound/oss/cs46xx

@@ -88,7 +88,7 @@ parameters.  for a copy email: twoller@crystal.cirrus.com
 
 MODULE_PARMS definitions
 ------------------------
-MODULE_PARM(defaultorder, "i");
+module_param(defaultorder, ulong, 0);
 defaultorder=N
 where N is a value from 1 to 12
 The buffer order determines the size of the dma buffer for the driver.
@@ -98,18 +98,18 @@ to not underrun the dma buffer as easily.  As default, use 32k (order=3)
 rather than 64k as some of the games work more responsively.
 (2^N) * PAGE_SIZE = allocated buffer size
 
-MODULE_PARM(cs_debuglevel, "i");
-MODULE_PARM(cs_debugmask, "i");
+module_param(cs_debuglevel, ulong, 0644);
+module_param(cs_debugmask, ulong, 0644);
 cs_debuglevel=N
 cs_debugmask=0xMMMMMMMM
 where N is a value from 0 (no debug printfs), to 9 (maximum)
 0xMMMMMMMM is a debug mask corresponding to the CS_xxx bits (see driver source).
 
-MODULE_PARM(hercules_egpio_disable, "i");
+module_param(hercules_egpio_disable, ulong, 0);
 hercules_egpio_disable=N
 where N is a 0 (enable egpio), or a 1 (disable egpio support)
 
-MODULE_PARM(initdelay, "i");
+module_param(initdelay, ulong, 0);
 initdelay=N
 This value is used to determine the millescond delay during the initialization
 code prior to powering up the PLL.  On laptops this value can be used to
@@ -118,19 +118,19 @@ system is booted under battery power then the mdelay()/udelay() functions fail t
 properly delay the required time.  Also, if the system is booted under AC power
 and then the power removed, the mdelay()/udelay() functions will not delay properly.
 
-MODULE_PARM(powerdown, "i");
+module_param(powerdown, ulong, 0);
 powerdown=N
 where N is 0 (disable any powerdown of the internal blocks) or 1 (enable powerdown)
 
 
-MODULE_PARM(external_amp, "i");
+module_param(external_amp, bool, 0);
 external_amp=1
 if N is set to 1, then force enabling the EAPD support in the primary AC97 codec.
 override the detection logic and force the external amp bit in the AC97 0x26 register
 to be reset (0).  EAPD should be 0 for powerup, and 1 for powerdown.  The VTB Santa Cruz
 card has inverted logic, so there is a special function for these cards.
 
-MODULE_PARM(thinkpad, "i");
+module_param(thinkpad, bool, 0);
 thinkpad=1
 if N is set to 1, then force enabling the clkrun functionality.
 Currently, when the part is being used, then clkrun is disabled for the entire system,

arch/ppc/8xx_io/cs4218_tdm.c

@@ -126,11 +126,11 @@ static int numReadBufs = 4, readbufSize = 32;
 */
 static volatile cbd_t	*rx_base, *rx_cur, *tx_base, *tx_cur;
 
-MODULE_PARM(catchRadius, "i");
-MODULE_PARM(numBufs, "i");
-MODULE_PARM(bufSize, "i");
-MODULE_PARM(numreadBufs, "i");
-MODULE_PARM(readbufSize, "i");
+module_param(catchRadius, int, 0);
+module_param(numBufs, int, 0);
+module_param(bufSize, int, 0);
+module_param(numreadBufs, int, 0);
+module_param(readbufSize, int, 0);
 
 #define arraysize(x)	(sizeof(x)/sizeof(*(x)))
 #define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))

drivers/block/ataflop.c

@@ -271,7 +271,7 @@ unsigned char *DMABuffer;			  /* buffer for writes */
 static unsigned long PhysDMABuffer;   /* physical address */
 
 static int UseTrackbuffer = -1;		  /* Do track buffering? */
-MODULE_PARM(UseTrackbuffer, "i");
+module_param(UseTrackbuffer, int, 0);
 
 unsigned char *TrackBuffer;			  /* buffer for reads */
 static unsigned long PhysTrackBuffer; /* physical address */
@@ -296,7 +296,7 @@ static int MotorOn = 0, MotorOffTrys;
 static int IsFormatting = 0, FormatError;
 
 static int UserSteprate[FD_MAX_UNITS] = { -1, -1 };
-MODULE_PARM(UserSteprate, "1-" __MODULE_STRING(FD_MAX_UNITS) "i");
+module_param_array(UserSteprate, int, NULL, 0);
 
 /* Synchronization of FDC access. */
 static volatile int fdc_busy = 0;

drivers/cdrom/cm206.c

@@ -218,12 +218,12 @@ static int cm206_base = CM206_BASE;
 static int cm206_irq = CM206_IRQ;
 #ifdef MODULE
 static int cm206[2] = { 0, 0 };	/* for compatible `insmod' parameter passing */
+module_param_array(cm206, int, NULL, 0);	/* base,irq or irq,base */
 #endif
 
-MODULE_PARM(cm206_base, "i");	/* base */
-MODULE_PARM(cm206_irq, "i");	/* irq */
-MODULE_PARM(cm206, "1-2i");	/* base,irq or irq,base */
-MODULE_PARM(auto_probe, "i");	/* auto probe base and irq */
+module_param(cm206_base, int, 0);	/* base */
+module_param(cm206_irq, int, 0);	/* irq */
+module_param(auto_probe, bool, 0);	/* auto probe base and irq */
 MODULE_LICENSE("GPL");
 
 #define POLLOOP 100		/* milliseconds */

drivers/cdrom/sbpcd.c

@@ -464,8 +464,13 @@ static int sbpcd[] =
 static  __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock);
 static struct request_queue *sbpcd_queue;
 
-MODULE_PARM(sbpcd, "2i");
-MODULE_PARM(max_drives, "i");
+/* You can only set the first pair, from old MODULE_PARM code.  */
+static int sbpcd_set(const char *val, struct kernel_param *kp)
+{
+	get_options((char *)val, 2, (int *)sbpcd);
+	return 0;
+}
+module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0);
 
 #define NUM_PROBE  (sizeof(sbpcd) / sizeof(int))
 
@@ -553,6 +558,7 @@ static unsigned char msgnum;
 static char msgbuf[80];
 
 static int max_drives = MAX_DRIVES;
+module_param(max_drives, int, 0);
 #ifndef MODULE
 static unsigned char setup_done;
 static const char *str_sb_l = "soundblaster";

drivers/char/istallion.c

@@ -378,13 +378,13 @@ MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver");
 MODULE_LICENSE("GPL");
 
 
-MODULE_PARM(board0, "1-3s");
+module_param_array(board0, charp, NULL, 0);
 MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board1, "1-3s");
+module_param_array(board1, charp, NULL, 0);
 MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board2, "1-3s");
+module_param_array(board2, charp, NULL, 0);
 MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board3, "1-3s");
+module_param_array(board3, charp, NULL, 0);
 MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
 
 #endif

drivers/char/mxser.c

@@ -243,10 +243,10 @@ static int verbose = 0;
 
 MODULE_AUTHOR("Casper Yang");
 MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-MODULE_PARM(ioaddr, "1-4i");
-MODULE_PARM(ttymajor, "i");
-MODULE_PARM(calloutmajor, "i");
-MODULE_PARM(verbose, "i");
+module_param_array(ioaddr, int, NULL, 0);
+module_param(ttymajor, int, 0);
+module_param(calloutmajor, int, 0);
+module_param(verbose, bool, 0);
 MODULE_LICENSE("GPL");
 
 struct mxser_log {

drivers/char/riscom8.c

@@ -1743,10 +1743,10 @@ static int iobase;
 static int iobase1;
 static int iobase2;
 static int iobase3;
-MODULE_PARM(iobase, "i");
-MODULE_PARM(iobase1, "i");
-MODULE_PARM(iobase2, "i");
-MODULE_PARM(iobase3, "i");
+module_param(iobase, int, 0);
+module_param(iobase1, int, 0);
+module_param(iobase2, int, 0);
+module_param(iobase3, int, 0);
 
 MODULE_LICENSE("GPL");
 #endif /* MODULE */

drivers/isdn/hardware/avm/b1dma.c

@@ -39,7 +39,7 @@ MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
 
 static int suppress_pollack = 0;
-MODULE_PARM(suppress_pollack, "0-1i");
+module_param(suppress_pollack, bool, 0);
 
 /* ------------------------------------------------------------- */
 

drivers/isdn/hardware/avm/b1isa.c

@@ -169,8 +169,8 @@ static struct pci_dev isa_dev[MAX_CARDS];
 static int io[MAX_CARDS];
 static int irq[MAX_CARDS];
 
-MODULE_PARM(io, "1-" __MODULE_STRING(MAX_CARDS) "i");
-MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_CARDS) "i");
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
 

drivers/isdn/hardware/avm/c4.c

@@ -50,7 +50,7 @@ MODULE_DEVICE_TABLE(pci, c4_pci_tbl);
 MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM C2/C4 cards");
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
-MODULE_PARM(suppress_pollack, "0-1i");
+module_param(suppress_pollack, bool, 0);
 
 /* ------------------------------------------------------------- */
 

drivers/isdn/hardware/avm/t1isa.c

@@ -519,9 +519,9 @@ static int io[MAX_CARDS];
 static int irq[MAX_CARDS];
 static int cardnr[MAX_CARDS];
 
-MODULE_PARM(io, "1-" __MODULE_STRING(MAX_CARDS) "i");
-MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_CARDS) "i");
-MODULE_PARM(cardnr, "1-" __MODULE_STRING(MAX_CARDS) "i");
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(cardnr, int, NULL, 0);
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
 MODULE_PARM_DESC(cardnr, "Card number(s) (as jumpered)");

drivers/isdn/hysdn/hycapi.c

@@ -31,7 +31,7 @@
 static char hycapi_revision[]="$Revision: 1.8.6.4 $";
 
 unsigned int hycapi_enable = 0xffffffff; 
-MODULE_PARM(hycapi_enable, "i");
+module_param(hycapi_enable, uint, 0);
 
 typedef struct _hycapi_appl {
 	unsigned int ctrl_mask;

drivers/isdn/hysdn/hysdn_net.c

@@ -24,7 +24,7 @@
 #include "hysdn_defs.h"
 
 unsigned int hynet_enable = 0xffffffff; 
-MODULE_PARM(hynet_enable, "i");
+module_param(hynet_enable, uint, 0);
 
 /* store the actual version for log reporting */
 char *hysdn_net_revision = "$Revision: 1.8.6.4 $";

drivers/isdn/isdnloop/isdnloop.c

@@ -22,7 +22,7 @@ static char *isdnloop_id = "loop0";
 MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card");
 MODULE_AUTHOR("Fritz Elfert");
 MODULE_LICENSE("GPL");
-MODULE_PARM(isdnloop_id, "s");
+module_param(isdnloop_id, charp, 0);
 MODULE_PARM_DESC(isdnloop_id, "ID-String of first card");
 
 static int isdnloop_addcard(char *);

drivers/media/video/zr36120.c

@@ -70,10 +70,10 @@ MODULE_AUTHOR("Pauline Middelink <middelin@polyware.nl>");
 MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber");
 MODULE_LICENSE("GPL");
 
-MODULE_PARM(triton1,"i");
-MODULE_PARM(cardtype,"1-" __MODULE_STRING(ZORAN_MAX) "i");
-MODULE_PARM(video_nr,"i");
-MODULE_PARM(vbi_nr,"i");
+module_param(triton1, uint, 0);
+module_param_array(cardtype, uint, NULL, 0);
+module_param(video_nr, int, 0);
+module_param(vbi_nr, int, 0);
 
 static int zoran_cards;
 static struct zoran zorans[ZORAN_MAX];

drivers/mmc/au1xmmc.c

@@ -87,7 +87,7 @@ struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
 static int dma = 1;
 
 #ifdef MODULE
-MODULE_PARM(dma, "i");
+module_param(dma, bool, 0);
 MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
 #endif
 

drivers/mtd/maps/pcmciamtd.c

@@ -28,7 +28,7 @@
 
 #ifdef CONFIG_MTD_DEBUG
 static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
 #undef DEBUG
 #define DEBUG(n, format, arg...) \
@@ -89,17 +89,17 @@ static int mem_type;
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_PARM(bankwidth, "i");
+module_param(bankwidth, int, 0);
 MODULE_PARM_DESC(bankwidth, "Set bankwidth (1=8 bit, 2=16 bit, default=2)");
-MODULE_PARM(mem_speed, "i");
+module_param(mem_speed, int, 0);
 MODULE_PARM_DESC(mem_speed, "Set memory access speed in ns");
-MODULE_PARM(force_size, "i");
+module_param(force_size, int, 0);
 MODULE_PARM_DESC(force_size, "Force size of card in MiB (1-64)");
-MODULE_PARM(setvpp, "i");
+module_param(setvpp, int, 0);
 MODULE_PARM_DESC(setvpp, "Set Vpp (0=Never, 1=On writes, 2=Always on, default=0)");
-MODULE_PARM(vpp, "i");
+module_param(vpp, int, 0);
 MODULE_PARM_DESC(vpp, "Vpp value in 1/10ths eg 33=3.3V 120=12V (Dangerous)");
-MODULE_PARM(mem_type, "i");
+module_param(mem_type, int, 0);
 MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)");
 
 

drivers/net/atari_bionet.c

@@ -123,7 +123,7 @@ static char version[] =
  * Global variable 'bionet_debug'. Can be set at load time by 'insmod'
  */
 unsigned int bionet_debug = NET_DEBUG;
-MODULE_PARM(bionet_debug, "i");
+module_param(bionet_debug, int, 0);
 MODULE_PARM_DESC(bionet_debug, "bionet debug level (0-2)");
 MODULE_LICENSE("GPL");
 

drivers/net/atari_pamsnet.c

@@ -119,7 +119,7 @@ static char *version =
  * Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
  */
 unsigned int pamsnet_debug = NET_DEBUG;
-MODULE_PARM(pamsnet_debug, "i");
+module_param(pamsnet_debug, int, 0);
 MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
 MODULE_LICENSE("GPL");
 

drivers/net/atarilance.c

@@ -78,7 +78,7 @@ static int lance_debug = LANCE_DEBUG;
 #else
 static int lance_debug = 1;
 #endif
-MODULE_PARM(lance_debug, "i");
+module_param(lance_debug, int, 0);
 MODULE_PARM_DESC(lance_debug, "atarilance debug level (0-3)");
 MODULE_LICENSE("GPL");
 

drivers/net/cassini.c

@@ -192,12 +192,15 @@
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
+static int cassini_debug = -1;	/* -1 == use CAS_DEF_MSG_ENABLE as value */
+static int link_mode;
+
 MODULE_AUTHOR("Adrian Sun (asun@darksunrising.com)");
 MODULE_DESCRIPTION("Sun Cassini(+) ethernet driver");
 MODULE_LICENSE("GPL");
-MODULE_PARM(cassini_debug, "i");
+module_param(cassini_debug, int, 0);
 MODULE_PARM_DESC(cassini_debug, "Cassini bitmapped debugging message enable value");
-MODULE_PARM(link_mode, "i");
+module_param(link_mode, int, 0);
 MODULE_PARM_DESC(link_mode, "default link mode");
 
 /*
@@ -209,7 +212,7 @@ MODULE_PARM_DESC(link_mode, "default link mode");
  * Value in seconds, for user input.
  */
 static int linkdown_timeout = DEFAULT_LINKDOWN_TIMEOUT;
-MODULE_PARM(linkdown_timeout, "i");
+module_param(linkdown_timeout, int, 0);
 MODULE_PARM_DESC(linkdown_timeout,
 "min reset interval in sec. for PCS linkdown issue; disabled if not positive");
 
@@ -221,8 +224,6 @@ MODULE_PARM_DESC(linkdown_timeout,
 static int link_transition_timeout;
 
 
-static int cassini_debug = -1;	/* -1 == use CAS_DEF_MSG_ENABLE as value */
-static int link_mode;
 
 static u16 link_modes[] __devinitdata = {
 	BMCR_ANENABLE,			 /* 0 : autoneg */

drivers/net/chelsio/cxgb2.c

@@ -124,7 +124,7 @@ MODULE_LICENSE("GPL");
 
 static int dflt_msg_enable = DFLT_MSG_ENABLE;
 
-MODULE_PARM(dflt_msg_enable, "i");
+module_param(dflt_msg_enable, int, 0);
 MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap");