Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
Atom-X-Devs · Oct 8, 2014 · 28596c9 · 28596c9
2 parents b6420eb + 7bb38d5
commit 28596c9
Show file tree

Hide file tree

Showing 92 changed files with 125 additions and 135 deletions.
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
@@ -159,7 +159,7 @@ Description:
 		lower-level interface protocol used. Ethernet devices will show
 		a 'mtu' attribute value of 1500 unless changed.
 
-What:		/sys/calss/net/<iface>/netdev_group
+What:		/sys/class/net/<iface>/netdev_group
 Date:		January 2011
 KernelVersion:	2.6.39
 Contact:	netdev@vger.kernel.org

diff --git a/Documentation/Changes b/Documentation/Changes
@@ -167,18 +167,11 @@ later is recommended, due to some significant improvements).
 PCMCIAutils
 -----------
 
-PCMCIAutils replaces pcmcia-cs (see below). It properly sets up
+PCMCIAutils replaces pcmcia-cs. It properly sets up
 PCMCIA sockets at system startup and loads the appropriate modules
 for 16-bit PCMCIA devices if the kernel is modularized and the hotplug
 subsystem is used.
 
-Pcmcia-cs
----------
-
-PCMCIA (PC Card) support is now partially implemented in the main
-kernel source. The "pcmciautils" package (see above) replaces pcmcia-cs
-for newest kernels.
-
 Quota-tools
 -----------
 
@@ -341,37 +334,33 @@ Pcmciautils
 -----------
 o  <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/>
 
-Pcmcia-cs
----------
-o  <http://pcmcia-cs.sourceforge.net/>
-
 Quota-tools
 ----------
 o  <http://sourceforge.net/projects/linuxquota/>
 
 DocBook Stylesheets
 -------------------
-o  <http://nwalsh.com/docbook/dsssl/>
+o  <http://sourceforge.net/projects/docbook/files/docbook-dsssl/>
 
 XMLTO XSLT Frontend
 -------------------
 o  <http://cyberelk.net/tim/xmlto/>
 
 Intel P6 microcode
 ------------------
-o  <http://www.urbanmyth.org/microcode/>
+o  <https://downloadcenter.intel.com/>
 
 udev
 ----
-o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
+o <http://www.freedesktop.org/software/systemd/man/udev.html>
 
 FUSE
 ----
 o <http://sourceforge.net/projects/fuse>
 
 mcelog
 ------
-o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
+o <http://www.mcelog.org/>
 
 Networking
 **********

diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
@@ -675,7 +675,7 @@ the ones already enabled by DEBUG.
 Many subsystems have Kconfig debug options to turn on -DDEBUG in the
 corresponding Makefile; in other cases specific files #define DEBUG.  And
 when a debug message should be unconditionally printed, such as if it is
-already inside a debug-related #ifdef secton, printk(KERN_DEBUG ...) can be
+already inside a debug-related #ifdef section, printk(KERN_DEBUG ...) can be
 used.
 
 

diff --git a/Documentation/applying-patches.txt b/Documentation/applying-patches.txt
@@ -94,7 +94,7 @@ Common errors when patching
 ---
  When patch applies a patch file it attempts to verify the sanity of the
 file in different ways.
-Checking that the file looks like a valid patch file & checking the code
+Checking that the file looks like a valid patch file and checking the code
 around the bits being modified matches the context provided in the patch are
 just two of the basic sanity checks patch does.
 

diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt
@@ -42,7 +42,7 @@ nr_devices=[Number of devices]: Default: 2
   Number of block devices instantiated. They are instantiated as /dev/nullb0,
   etc.
 
-irq_mode=[0-2]: Default: 1-Soft-irq
+irqmode=[0-2]: Default: 1-Soft-irq
   The completion mode used for completing IOs to the block-layer.
 
   0: None.
@@ -53,7 +53,7 @@ irq_mode=[0-2]: Default: 1-Soft-irq
      completion.
 
 completion_nsec=[ns]: Default: 10.000ns
-  Combined with irq_mode=2 (timer). The time each completion event must wait.
+  Combined with irqmode=2 (timer). The time each completion event must wait.
 
 submit_queues=[0..nr_cpus]:
   The number of submission queues attached to the device driver. If unset, it

diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
@@ -11,7 +11,7 @@ read-write.
 
 add_random (RW)
 ----------------
-This file allows to trun off the disk entropy contribution. Default
+This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).
 
 discard_granularity (RO)
@@ -72,7 +72,7 @@ Maximum segment size of the device.
 
 minimum_io_size (RO)
 --------------------
-This is the smallest preferred io size reported by the device.
+This is the smallest preferred IO size reported by the device.
 
 nomerges (RW)
 -------------
@@ -98,7 +98,7 @@ regulated by nr_requests.
 
 optimal_io_size (RO)
 --------------------
-This is the optimal io size reported by the device.
+This is the optimal IO size reported by the device.
 
 physical_block_size (RO)
 ------------------------

diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -1,6 +1,6 @@
 Clock bindings for ARM Integrator and Versatile Core Module clocks
 
-Auxilary Oscillator Clock
+Auxiliary Oscillator Clock
 
 This is a configurable clock fed from a 24 MHz chrystal,
 used for generating e.g. video clocks. It is located on the

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -1,5 +1,5 @@
 SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
-Currently Freescale powerpc chip C29X is embeded with SEC 6.
+Currently Freescale powerpc chip C29X is embedded with SEC 6.
 SEC 6 device tree binding include:
    -SEC 6 Node
    -Job Ring Node

diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
@@ -9,7 +9,7 @@ Required properties:
 - interrupts: Should contain the interrupt for the device
 - clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
 - clock-names: Must contain "adc", matching entry in the clocks property.
-- vref-supply: The regulator supply ADC refrence voltage.
+- vref-supply: The regulator supply ADC reference voltage.
 
 Example:
 adc0: adc@4003b000 {

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -47,7 +47,7 @@ sub-node should be of the format as listed below.
 
  regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
 
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
+ BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
  regulator-ramp-delay = <0> can be used for them to disable ramp delay.
  In the absence of the regulator-ramp-delay property, the default ramp
  delay will be used.

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -110,8 +110,8 @@ on various other factors also like;
 	Other factor which governs the selection of ecc-scheme is oob-size.
 	Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
 	so the device should have enough free bytes available its OOB/Spare
-	area to accomodate ECC for entire page. In general following expression
-	helps in determining if given device can accomodate ECC syndrome:
+	area to accommodate ECC for entire page. In general following expression
+	helps in determining if given device can accommodate ECC syndrome:
 	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
@@ -133,5 +133,5 @@ on various other factors also like;
 	Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
 		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
 		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which can be accomodate in the OOB/Spare area of this device
+		which can be accommodated in the OOB/Spare area of this device
 		(OOBSIZE=128). So this device can use BCH16 ecc-scheme.
diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
@@ -17,7 +17,7 @@ Required properties:
 - samsung,pbl: Integer, Programmable Burst Length.
   Supported values are 1, 2, 4, 8, 16, or 32.
 - samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
-  This is an interger and represents allowable DMA bursts when fixed burst.
+  This is an integer and represents allowable DMA bursts when fixed burst.
   Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
   When fixed length is needed for burst mode, it can be set within allowable
   range.

diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -58,5 +58,5 @@ Examples:
 		snps,multicast-filter-bins = <256>;
 		snps,perfect-filter-entries = <128>;
 		clocks = <&clock>;
-		clock-names = "stmmaceth">;
+		clock-names = "stmmaceth";
 	};
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
@@ -55,7 +55,7 @@ For CAM, this 24-bit offset is:
         cfg_offset(bus, device, function, register) =
                    bus << 16 | device << 11 | function << 8 | register
 
-Whilst ECAM extends this by 4 bits to accomodate 4k of function space:
+Whilst ECAM extends this by 4 bits to accommodate 4k of function space:
 
         cfg_offset(bus, device, function, register) =
                    bus << 20 | device << 15 | function << 12 | register

diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -27,7 +27,7 @@ phys: phy {
 };
 
 That node describes an IP block (PHY provider) that implements 2 different PHYs.
-In order to differentiate between these 2 PHYs, an additonal specifier should be
+In order to differentiate between these 2 PHYs, an additional specifier should be
 given while trying to get a reference to it.
 
 PHY user node

diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt
@@ -24,7 +24,7 @@ Optional properties :
  - cm-thermal-zone : name of external thermometer's thermal zone
  - cm-battery-* : threshold battery temperature for charging
 	-cold : critical cold temperature of battery for charging
-	-cold-in-minus : flag that cold temerature is in minus degree
+	-cold-in-minus : flag that cold temperature is in minus degrees
 	-hot : critical hot temperature of battery for charging
 	-temp-diff : temperature difference to allow recharging
  - cm-dis/charging-max = limits of charging duration

diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt
@@ -33,7 +33,7 @@ Optional properties:
 	0: Channel 1
 	1: Channel 2
 	2: Channel 3
-	If parameter is missing, channel 1 is choosen.
+	If parameter is missing, channel 1 is chosen.
 	This properties have to be specified as '/bits/ 8' values.
 
   -  st,thermal-warning-recover:

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,7 +140,7 @@ tlm	Trusted Logic Mobility
 toradex	Toradex AG
 toshiba	Toshiba Corporation
 toumaz	Toumaz
-usi	Universal Scientifc Industrial Co., Ltd.
+usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.

diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
@@ -39,8 +39,8 @@ Atmel LCDC Display
 -----------------------------------------------------
 Required properties (as per of_videomode_helper):
 
- - atmel,dmacon: dma controler configuration
- - atmel,lcdcon2: lcd controler configuration
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
  - atmel,guard-time: lcd guard time (Delay in frame periods)
  - bits-per-pixel: lcd panel bit-depth.
 

diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
@@ -20,7 +20,7 @@ Optional properties:
 	register is not modified as recommended by the datasheet.
 - fsl,lpccr: Contrast Control Register value. This property provides the
 	default value for the contrast control register.
-	If that property is ommited, the register is zeroed.
+	If that property is omitted, the register is zeroed.
 - fsl,lscr1: LCDC Sharp Configuration Register value.
 
 Example:

diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
@@ -122,7 +122,7 @@ Then as usual to get your report with:
 Freeing kmemleak internal objects
 ---------------------------------
 
-To allow access to previosuly found memory leaks after kmemleak has been
+To allow access to previously found memory leaks after kmemleak has been
 disabled by the user or due to an fatal error, internal kmemleak objects
 won't be freed when kmemleak is disabled, and those objects may occupy
 a large part of physical memory.

diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/lockup-watchdogs.txt
@@ -12,7 +12,7 @@ stack trace is displayed upon detection and, by default, the system
 will stay locked up. Alternatively, the kernel can be configured to
 panic; a sysctl, "kernel.softlockup_panic", a kernel parameter,
 "softlockup_panic" (see "Documentation/kernel-parameters.txt" for
-details), and a compile option, "BOOTPARAM_HARDLOCKUP_PANIC", are
+details), and a compile option, "BOOTPARAM_SOFTLOCKUP_PANIC", are
 provided for this.
 
 A 'hardlockup' is defined as a bug that causes the CPU to loop in

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
@@ -2,7 +2,7 @@ README for MIPS AU1XXX IDE driver - Released 2005-07-15
 
 ABOUT
 -----
-This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+This file describes the 'drivers/ide/au1xxx-ide.c', related files and the
 services they provide.
 
 If you are short in patience and just want to know how to add your hard disc to

diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
@@ -132,5 +132,5 @@
 
 5. REFERENCES
 
- [1]	include/linux/serial.h
+ [1]	include/uapi/linux/serial.h
  [2]	Documentation/devicetree/bindings/serial/rs485.txt
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
@@ -146,7 +146,7 @@ set_termios()		Notify the tty driver that the device's termios
 			driver function is responsible for modifying any
 			bits in the request it cannot fulfill to indicate
 			the actual modes being used. A device with no
-			hardware capability for change (eg a USB dongle or
+			hardware capability for change (e.g. a USB dongle or
 			virtual port) can provide NULL for this method.
 
 throttle()		Notify the tty driver that input buffers for the
@@ -258,7 +258,7 @@ put_char()	-	Stuff a single character onto the queue. The
 
 flush_chars()	-	Ask the kernel to write put_char queue
 
-write_room()	-	Return the number of characters tht can be stuffed
+write_room()	-	Return the number of characters that can be stuffed
 			into the port buffers without overflow (or less).
 			The ldisc is responsible for being intelligent
  			about multi-threading of write_room/write calls

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
@@ -671,7 +671,7 @@ config TICKSOURCE_CORETMR
 	default y
 endmenu
 
-menu "Clock souce"
+menu "Clock source"
 	depends on GENERIC_CLOCKEVENTS
 config CYCLES_CLOCKSOURCE
 	bool "CYCLES"

diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
@@ -455,7 +455,7 @@ void handle_sec_sci_fault(uint32_t gstat)
 			printk(KERN_DEBUG "sec ack err\n");
 			break;
 		default:
-			printk(KERN_DEBUG "sec sci unknow err\n");
+			printk(KERN_DEBUG "sec sci unknown err\n");
 		}
 	}
 

diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
@@ -73,7 +73,7 @@ config ATARI_ETHERNEC
 	  ROM port. The driver works by polling instead of interrupts, so it
 	  is quite slow.
 
-	  This driver also suppports the ethernet part of the NetUSBee ROM
+	  This driver also supports the ethernet part of the NetUSBee ROM
 	  port combined Ethernet/USB adapter.
 
 	  To compile the actual ethernet driver, choose Y or M in for the NE2000

diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
@@ -1,7 +1,7 @@
 if CPU_CAVIUM_OCTEON
 
 config CAVIUM_CN63XXP1
-	bool "Enable CN63XXP1 errata worarounds"
+	bool "Enable CN63XXP1 errata workarounds"
 	default "n"
 	help
 	  The CN63XXP1 chip requires build time workarounds to

diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
@@ -221,7 +221,7 @@ void __init ltq_soc_init(void)
 		(request_mem_region(res_sys[2].start,
 				resource_size(&res_sys[2]),
 				res_sys[2].name) < 0))
-		pr_err("Failed to request core reources");
+		pr_err("Failed to request core resources");
 
 	status_membase = ioremap_nocache(res_status.start,
 					resource_size(&res_status));

diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
@@ -318,7 +318,7 @@ void __init ltq_soc_init(void)
 				res_cgu.name) < 0) ||
 		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
 				res_ebu.name) < 0))
-		pr_err("Failed to request core reources");
+		pr_err("Failed to request core resources");
 
 	pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu));
 	ltq_cgu_membase = ioremap_nocache(res_cgu.start,

diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
@@ -218,7 +218,7 @@ static int ltq_pci_probe(struct platform_device *pdev)
 	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res_cfg || !res_bridge) {
-		dev_err(&pdev->dev, "missing memory reources\n");
+		dev_err(&pdev->dev, "missing memory resources\n");
 		return -EINVAL;
 	}
 

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
@@ -181,7 +181,7 @@ endmenu
 config SMP
 	bool "Symmetric multi-processing support"
 	default y
-	depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
+	depends on MN10300_PROC_MN2WS0050
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more

diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
@@ -61,7 +61,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		if (*reg++ != 0)
 			fatal("Memory range is not based at address 0\n");
 
-	/* get the memsize and trucate it to under 4G on 32 bit machines */
+	/* get the memsize and truncate it to under 4G on 32 bit machines */
 	memsize64 = 0;
 	for (i = 0; i < *ns; i++)
 		memsize64 = (memsize64 << 32) | *reg++;