drm/apple: Add missing RTKit Kconfig dependency #256
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Add a DRM/KMS driver for Apple system on chips using the DCP coprocessor, namely the Apple M1. The DCP was added in Apple A14; this driver does not apply to older iDevices. This driver targets the DCP firmware API shipped by macOS 12.1. Currently no incompatibilities with macOS 12.0.1 or 12.2.1 are known. Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Co-developed-by: Janne Grunau <j@jannau.net> Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://oftc.irclog.whitequark.org/asahi-dev/2022-03-20#30747564 Link: https://oftc.irclog.whitequark.org/asahi-dev/2022-03-20#30747570 Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Xorg startup with modesetting driver triggers this. Move vblank signalling to dcp to avoid a circular dependency between apple_drv and dcp. Signed-off-by: Janne Grunau <j@jannau.net>
Frequency differs between M1 and M1 Pro/Max/Ultra. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
The framebuffer can be unreferenced by GEM while the display controller is still using it for scanout resulting in IOVA faults and crashed dcp. dcp has to hold a reference until the swap is complete. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Use the firmware setPowerState callback. Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
fixup! WIP: drm/apple: Add DCP display driver Signed-off-by: Janne Grunau <j@jannau.net>
The swap completes only after the async reply from DCP. Uses drm_atomic_helper_wait_for_flip_done instead of drm_atomic_helper_wait_for_vblanks. This should allow ius to get rid of the scheduled fake vblanks. Signed-off-by: Janne Grunau <j@jannau.net>
Mostly for the generic callbacks nop, true, false. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Avoids unexpected callbacks on nesting state errors. Encountered when making DCP calls from a second thread for the backlight. Signed-off-by: Janne Grunau <j@jannau.net>
Call power-on/-off handling explicitly from apple_crtc_atomic_enable / apple_crtc_atomic_disable. This makes DPMS work. Signed-off-by: Janne Grunau <j@jannau.net>
squash! WIP: GPU/apple: t600x work in progress Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Handling it with trampoline_false can result in errors due to uninitialized data. Signed-off-by: Janne Grunau <j@jannau.net>
If there is a mismatch in the output size this way we have at leas consistant results. Signed-off-by: Janne Grunau <j@jannau.net>
Used by dcp on mode changes on the Macbook Pro 14" (M1 Max). Signed-off-by: Janne Grunau <j@jannau.net>
This seems to be incorrect but the flag seems to be related to clearing. Allows unmapping surfaces after the swap finished. Signed-off-by: Janne Grunau <j@jannau.net>
Use a device_link to ensure piodma has is bound to its DART. fixup! WIP: drm/apple: Add DCP display driver Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Fixes a display wakeup issue seen with Plasma/X11. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
For external display support DCP will use more endpoints. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Triggering modesets from drm_connector_helper_funcs.atomic_check is more in line with DRM/KMS' design and allows returning errors from failed modesets. Ignore hotplug callbacks from DCP during modeset. DCP always does disconnected -> connected on (at least the initial) modeset. Shield drm helpers from this. This improves reliability with externel (dptx based) displays. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
squash! drm: apple: Extract modeset crtc's atomic_flush() Fixes: 99d7bb8 ("drm: apple: Extract modeset crtc's atomic_flush()") Signed-off-by: Janne Grunau <j@jannau.net>
- Do not trigger an hotplug event from disconnect. DCP/iomfb notices that itself. - Check HPD status before disconnecting DPTX in the crtc disable path. - disconnect on suspend to allow an orderly re-connect on resume Signed-off-by: Janne Grunau <j@jannau.net>
Avoid device wide hotplugs as DCP knowns the affected connector. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Only observed with dcp/dptx in linux after initialisation and reset in m1n1. On the initial startup dcp sends two D576 (hotPlug_notify_gated) presumendly due to state confusion due to the multiple dptx connections. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Under unknown but slightly broken conditions dcp sends timing modes without linked color modes. Log a warning when this happens and log the number of valid modes before emitting HPD events. Signed-off-by: Janne Grunau <j@jannau.net>
DSC setup seems to require extra steps. dcp reports itself a bandwith limit of 926484480: `IOMFB removing mode: 3840 x 2160 @ 119, bw: 987033600 max: 926484480` Signed-off-by: Janne Grunau <j@jannau.net>
DPTX setup from an initialized connection and display with sleeping and reset dcp is unfortunately quite fragile. The display connection has to be stopped and reestablished. Goodbye flicker free boot. If the IOMFB endpoint is started too early dcp might provide incomplete timing modes which prevent modesets. On display standby a HPD is triggered should result in a fully initialized dcp. If not a display cable unplug and plug should help. MacOS doesn't handle this at all and just gives up. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Should make connect more reliable by avoiding hardcoded waits which are either to long or too short. In the second case the display can't be brought up since dcp fails to report any modes during start. Signed-off-by: Janne Grunau <j@jannau.net>
DCP color mode scoring seems to prefer high bit depth color modes even when it it would require DSC. For example 12-bit 4k 60 Hz YCbCr 4:4:4 over a 600 MHz HDMI 2.0 link. Prefer 8-/10-bit RGB or YCbCr 4:4:4 modes if available. Signed-off-by: Janne Grunau <j@jannau.net>
Fixes missing physical display dimensions for HDMI display on Macbook Pros. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
The payload is not necessarily epic_std_service_ap_call. The powerlog service on the system endpoint passes serialized dictionaries as payload. Signed-off-by: Janne Grunau <j@jannau.net>
The 13.5 firmware has stopped updating the NITS property on backlight brightness changes. Parse system log events instead which report backlight's brightness in millinits. Fixes the backlight device's "actual_brightness" property used by the systemd backlight service to save and restore brightness. Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
|
merged into https://github.com/jannau/linux/tree/beta-6.8/asahi-wip, thanks |
|
merged in asahi-wip / asahi-6.8.8-1 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.