Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Device tree and bindings updates for 3.12.

  General additions of various on-chip and on-board peripherals on
  various platforms as support gets added.  Some of the bigger changes
  are:

   - Addition of (new) PCI-e support on Tegra.
   - More Tegra4 support, including PMC configuration for Dalmore.
   - Addition of a new board for Exynos4 (trats2) and more bindings for
     4x12 IP.
   - Addition of Allwinner A20 and A31 SoC and board files.
   - Move of the ST Ericsson device tree files to now use ste-* prefix.
   - More move of hardware description of shmobile platforms to DT.
   - Two new board dts files for Freescale MXs"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
  dts: Rename DW APB timer compatible strings
  dts: Deprecate ALTR as a vendor prefix
  of: add vendor prefix for Altera Corp.
  ARM: at91/dt: sam9x5ek: add sound configuration
  ARM: at91/dt: sam9x5ek: enable SSC
  ARM: at91/dt: sam9x5ek: add WM8731 codec
  ARM: at91/dt: sam9x5: add SSC DMA parameters
  ARM: at91/dt: add at91rm9200 PQFP package version
  ARM: at91: at91rm9200: set default mmc0 pinctrl-names
  ARM: at91: at91sam9n12: correct pin number of gpio-key
  ARM: at91: at91sam9n12: add qt1070 support
  ARM: at91: at91sam9n12: add pinctrl of TWI
  ARM: at91: Add PMU support for sama5d3
  ARM: at91: at91sam9260: add missing pinctrl-names on mmc
  ARM: tegra: configure power off for Dalmore
  ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
  ARM: dts: add sdio blocks to bcm28155-ap board
  ARM: dts: align sdio numbers to HW definition
  ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
  ARM: sun7i: Add Allwinner A20 DTSI
  ...

Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

@@ -6,4 +6,5 @@ bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
 
 Required root node property:
 
-compatible = "bcm,bcm11351";
+compatible = "brcm,bcm11351";
+DEPRECATED: compatible = "bcm,bcm11351";

Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt → Documentation/devicetree/bindings/arm/bcm/kona-timer.txt

@@ -4,14 +4,15 @@ This timer is used in the following Broadcom SoCs:
  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
 
 Required properties:
-- compatible : "bcm,kona-timer"
+- compatible : "brcm,kona-timer"
+- DEPRECATED: compatible : "bcm,kona-timer"
 - reg : Register range for the timer
 - interrupts : interrupt for the timer
 - clock-frequency: frequency that the clock operates
 
 Example:
 	timer@35006000 {
-		compatible = "bcm,kona-timer";
+		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <0x0 7 0x4>;
 		clock-frequency = <32768>;

Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt

@@ -0,0 +1,15 @@
+Broadcom Kona Family Watchdog Timer
+-----------------------------------
+
+This watchdog timer is used in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+  - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+  - reg: memory address & range
+
+Example:
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -16,9 +16,9 @@ Required properties:
 	  mapped region.
 
   - interrupts : MFC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to mfc clocks.
-  - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
-		  corresponding to entries in the clocks property.
+  - clocks : from common clock binding: handle to mfc clock.
+  - clock-names : from common clock binding: must contain "mfc",
+		  corresponding to entry in the clocks property.
 
   - samsung,mfc-r : Base address of the first memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
@@ -38,8 +38,8 @@ mfc: codec@13400000 {
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
 	samsung,power-domain = <&pd_mfc>;
-	clocks = <&clock 170>, <&clock 273>;
-	clock-names = "sclk_mfc", "mfc";
+	clocks = <&clock 273>;
+	clock-names = "mfc";
 };
 
 Board specific DT entry:

Documentation/devicetree/bindings/misc/smc.txt

@@ -4,11 +4,12 @@ This binding defines the location of the bounce buffer
 used for non-secure to secure communications.
 
 Required properties:
-- compatible : "bcm,kona-smc"
+- compatible : "brcm,kona-smc"
+- DEPRECATED: compatible : "bcm,kona-smc"
 - reg : Location and size of bounce buffer
 
 Example:
 	smc@0x3404c000 {
-		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; //1 KiB in SRAM
 	};

Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt → Documentation/devicetree/bindings/mmc/kona-sdhci.txt

@@ -4,12 +4,13 @@ This file documents differences between the core properties in mmc.txt
 and the properties present in the bcm281xx SDHCI
 
 Required properties:
-- compatible : Should be "bcm,kona-sdhci"
+- compatible : Should be "brcm,kona-sdhci"
+- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
 
 Example:
 
 sdio2: sdio@0x3f1a0000 {
-	compatible = "bcm,kona-sdhci";
+	compatible = "brcm,kona-sdhci";
 	reg = <0x3f1a0000 0x10000>;
 	interrupts = <0x0 74 0x4>;
 };

Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt

@@ -80,6 +80,17 @@ Valid values for pin and group names are:
     dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
     gmh, owr, uda.
 
+Valid values for nvidia,functions are:
+
+  blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
+  displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
+  extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
+  i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
+  pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
+  rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
+  spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
+  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
+
 Example:
 
 	pinmux: pinmux {

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -103,6 +103,17 @@ Valid values for pin and group names are:
     drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
     drive_uda.
 
+Valid values for nvidia,functions are:
+
+  ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
+  displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
+  hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
+  osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
+  pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
+  sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
+  spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+  vi, vi_sensor_clk, xio
+
 Example:
 
 	pinctrl@70000000 {

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

@@ -91,6 +91,18 @@ Valid values for pin and group names are:
     gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
     uart3, uda, vi1.
 
+Valid values for nvidia,functions are:
+
+  blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
+  dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
+  extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
+  i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
+  nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
+  rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
+  spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
+  uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
+  vi, vi_alt1, vi_alt2, vi_alt3
+
 Example:
 
 	pinctrl@70000000 {

Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt

@@ -1,8 +1,8 @@
 ST Ericsson Nomadik pinmux controller
 
 Required properties:
-- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540",
-              "stericsson,nmk-pinctrl-stn8815"
+- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
+              "stericsson,stn8815-pinctrl"
 - reg: Should contain the register physical address and length of the PRCMU.
 
 Please refer to pinctrl-bindings.txt in this directory for details of the
@@ -68,7 +68,7 @@ Optional subnode-properties:
 Example board file extract:
 
 	pinctrl@80157000 {
-		compatible = "stericsson,nmk-pinctrl";
+		compatible = "stericsson,db8500-pinctrl";
 		reg = <0x80157000 0x2000>;
 
 		pinctrl-names = "default";

Documentation/devicetree/bindings/rtc/dw-apb.txt

@@ -1,7 +1,10 @@
 * Designware APB timer
 
 Required properties:
-- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc"
+- compatible: One of:
+ 	"snps,dw-apb-timer"
+	"snps,dw-apb-timer-sp" <DEPRECATED>
+	"snps,dw-apb-timer-osc" <DEPRECATED>
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: IRQ line for the timer.
@@ -20,25 +23,10 @@ systems may use one.
 
 
 Example:
-
-		timer1: timer@ffc09000 {
-				compatible = "snps,dw-apb-timer-sp";
-				interrupts = <0 168 4>;
-				clock-frequency = <200000000>;
-				reg = <0xffc09000 0x1000>;
-			};
-
-		timer2: timer@ffd00000 {
-				compatible = "snps,dw-apb-timer-osc";
-				interrupts = <0 169 4>;
-				clock-frequency = <200000000>;
-				reg = <0xffd00000 0x1000>;
-			};
-
-		timer3: timer@ffe00000 {
-				compatible = "snps,dw-apb-timer-osc";
-				interrupts = <0 170 4>;
-				reg = <0xffe00000 0x1000>;
-				clocks = <&timer_clk>, <&timer_pclk>;
-				clock-names = "timer", "pclk";
-			};
+	timer@ffe00000 {
+		compatible = "snps,dw-apb-timer";
+		interrupts = <0 170 4>;
+		reg = <0xffe00000 0x1000>;
+		clocks = <&timer_clk>, <&timer_pclk>;
+		clock-names = "timer", "pclk";
+	};

Documentation/devicetree/bindings/serial/altera_jtaguart.txt

@@ -1,4 +1,5 @@
 Altera JTAG UART
 
 Required properties:
-- compatible : should be "ALTR,juart-1.0"
+- compatible : should be "ALTR,juart-1.0" <DEPRECATED>
+- compatible : should be "altr,juart-1.0"

Documentation/devicetree/bindings/serial/altera_uart.txt

@@ -1,7 +1,8 @@
 Altera UART
 
 Required properties:
-- compatible : should be "ALTR,uart-1.0"
+- compatible : should be "ALTR,uart-1.0" <DEPRECATED>
+- compatible : should be "altr,uart-1.0"
 
 Optional properties:
 - clock-frequency : frequency of the clock input to the UART

Documentation/devicetree/bindings/serio/altera_ps2.txt

@@ -1,4 +1,5 @@
 Altera UP PS/2 controller
 
 Required properties:
-- compatible : should be "ALTR,ps2-1.0".
+- compatible : should be "ALTR,ps2-1.0". <DEPRECATED>
+- compatible : should be "altr,ps2-1.0".

Documentation/devicetree/bindings/spi/spi_altera.txt

@@ -1,4 +1,5 @@
 Altera SPI
 
 Required properties:
-- compatible : should be "ALTR,spi-1.0".
+- compatible : should be "ALTR,spi-1.0". <DEPRECATED>
+- compatible : should be "altr,spi-1.0".

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -7,6 +7,7 @@ ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 ak	Asahi Kasei Corp.
+altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.

arch/arm/Makefile

@@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti

arch/arm/boot/dts/Makefile

@@ -42,7 +42,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
+dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
+	bcm28155-ap.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
@@ -53,13 +54,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
 	exynos4412-odroidx.dtb \
-	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos4412-trats2.dtb \
 	exynos5250-arndale.dtb \
-	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
@@ -143,7 +145,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
 	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
@@ -176,13 +180,14 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am43x-epos-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
-	hrefprev60.dtb \
-	hrefv60plus.dtb \
-	ccu8540.dtb \
-	ccu9540.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60.dtb \
+	ste-hrefv60plus.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	emev2-kzm9d-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
@@ -192,6 +197,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	sh73a0-kzm9g-reference.dtb \
 	r8a73a4-ape6evm.dtb \
 	sh7372-mackerel.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
@@ -206,11 +212,14 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2020.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a13-olinuxino.dtb
+	sun5i-a13-olinuxino.dtb \
+	sun6i-a31-colombus.dtb \
+	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
@@ -224,8 +233,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
-	tegra114-dalmore.dtb \
-	tegra114-pluto.dtb
+	tegra114-dalmore.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb

arch/arm/boot/dts/at91rm9200.dtsi

@@ -120,6 +120,7 @@
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91rm9200_pqfp.dtsi

@@ -0,0 +1,17 @@
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};

arch/arm/boot/dts/at91sam9260.dtsi

@@ -572,6 +572,7 @@
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};