Skip to content

Commit

Permalink
env: Finish migration of common ENV options
Browse files Browse the repository at this point in the history 
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
  • Loading branch information
@trini
trini committed Nov 20, 2019
1 parent 8160c38 commit a09fea1
Show file tree
Hide file tree
Showing 1,605 changed files with 2,597 additions and 2,331 deletions.
2 changes: 1 addition & 1 deletion arch/arm/cpu/armv8/fsl-layerscape/soc.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -844,7 +844,7 @@ int board_late_init(void)
* check if gd->env_addr is default_environment; then setenv bootcmd
* and mcinitcmd.
*/
#if !defined(CONFIG_ENV_ADDR) || defined(ENV_IS_EMBEDDED)
#ifdef CONFIG_SYS_RELOC_GD_ENV_ADDR
if (gd->env_addr == (ulong)&default_environment[0]) {
#else
if (gd->env_addr + gd->reloc_off == (ulong)&default_environment[0]) {
Expand Down
4 changes: 2 additions & 2 deletions board/freescale/b4860qds/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -100,8 +100,8 @@ void board_init_r(gd_t *gd, ulong dest_addr)
#else
/* relocate environment function pointers etc. */
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;
#endif

Expand Down
4 changes: 2 additions & 2 deletions board/freescale/c29xpcie/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -61,8 +61,8 @@ void board_init_r(gd_t *gd, ulong dest_addr)

/* relocate environment function pointers etc. */
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
4 changes: 2 additions & 2 deletions board/freescale/p1010rdb/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -86,8 +86,8 @@ void board_init_r(gd_t *gd, ulong dest_addr)
/* relocate environment function pointers etc. */
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;
#else
env_relocate();
Expand Down
4 changes: 2 additions & 2 deletions board/freescale/p1022ds/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -98,9 +98,9 @@ void board_init_r(gd_t *gd, ulong dest_addr)
/* relocate environment function pointers etc. */
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;
#else
env_relocate();
Expand Down
4 changes: 2 additions & 2 deletions board/freescale/p1_p2_rdb_pc/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -91,8 +91,8 @@ void board_init_r(gd_t *gd, ulong dest_addr)
/* relocate environment function pointers etc. */
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;
#else
env_relocate();
Expand Down
8 changes: 4 additions & 4 deletions board/freescale/t102xqds/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -125,19 +125,19 @@ void board_init_r(gd_t *gd, ulong dest_addr)

#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
8 changes: 4 additions & 4 deletions board/freescale/t102xrdb/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -112,19 +112,19 @@ void board_init_r(gd_t *gd, ulong dest_addr)

#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
8 changes: 4 additions & 4 deletions board/freescale/t104xrdb/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -110,17 +110,17 @@ void board_init_r(gd_t *gd, ulong dest_addr)
defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;
#endif

Expand Down
8 changes: 4 additions & 4 deletions board/freescale/t208xqds/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -111,19 +111,19 @@ void board_init_r(gd_t *gd, ulong dest_addr)

#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
8 changes: 4 additions & 4 deletions board/freescale/t208xrdb/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -81,19 +81,19 @@ void board_init_r(gd_t *gd, ulong dest_addr)

#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_SPI_BOOT
fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
6 changes: 3 additions & 3 deletions board/freescale/t4qds/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -120,15 +120,15 @@ void board_init_r(gd_t *gd, ulong dest_addr)

#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);
#endif

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
4 changes: 2 additions & 2 deletions board/freescale/t4rdb/spl.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -84,9 +84,9 @@ void board_init_r(gd_t *gd, ulong dest_addr)

mmc_initialize(bd);
mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
(uchar *)SPL_ENV_ADDR);

gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(SPL_ENV_ADDR);
gd->env_valid = ENV_VALID;

i2c_init_all();
Expand Down
3 changes: 3 additions & 0 deletions configs/10m50_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,8 @@
CONFIG_NIOS2=y
CONFIG_SYS_CONFIG_NAME="10m50_devboard"
CONFIG_ENV_SIZE=0x10000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
Expand All @@ -18,6 +20,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xF4080000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_ALTERA_PIO=y
Expand Down
3 changes: 3 additions & 0 deletions configs/3c120_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,8 @@
CONFIG_NIOS2=y
CONFIG_SYS_CONFIG_NAME="3c120_devboard"
CONFIG_ENV_SIZE=0x20000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
Expand All @@ -18,6 +20,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xE2880000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_ALTERA_PIO=y
Expand Down
2 changes: 2 additions & 0 deletions configs/B4420QDS_NAND_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,6 +4,8 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x140000
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_B4420QDS=y
Expand Down
3 changes: 3 additions & 0 deletions configs/B4420QDS_SPIFLASH_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4420QDS=y
CONFIG_FIT=y
Expand Down
3 changes: 3 additions & 0 deletions configs/B4420QDS_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4420QDS=y
CONFIG_FIT=y
Expand All @@ -22,6 +24,7 @@ CONFIG_CMD_DATE=y
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_FSL_CAAM=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
Expand Down
2 changes: 2 additions & 0 deletions configs/B4860QDS_NAND_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,6 +4,8 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x140000
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
Expand Down
1 change: 1 addition & 0 deletions configs/B4860QDS_SECURE_BOOT_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_NXP_ESBC=y
CONFIG_ENV_SIZE=0x2000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
# CONFIG_SYS_MALLOC_F is not set
Expand Down
3 changes: 3 additions & 0 deletions configs/B4860QDS_SPIFLASH_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
CONFIG_FIT=y
Expand Down
2 changes: 2 additions & 0 deletions configs/B4860QDS_SRIO_PCIE_BOOT_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,6 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
CONFIG_FIT=y
Expand All @@ -23,6 +24,7 @@ CONFIG_CMD_DATE=y
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_ENV_IS_IN_REMOTE=y
CONFIG_ENV_ADDR=0xFFE20000
CONFIG_FSL_CAAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
Expand Down
3 changes: 3 additions & 0 deletions configs/B4860QDS_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
CONFIG_FIT=y
Expand All @@ -22,6 +24,7 @@ CONFIG_CMD_DATE=y
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_FSL_CAAM=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
Expand Down
2 changes: 2 additions & 0 deletions configs/BSC9131RDB_NAND_SYSCLK100_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x00201000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9131RDB=y
Expand Down
2 changes: 2 additions & 0 deletions configs/BSC9131RDB_NAND_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x00201000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9131RDB=y
Expand Down
3 changes: 3 additions & 0 deletions configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9131RDB=y
CONFIG_FIT=y
Expand Down
3 changes: 3 additions & 0 deletions configs/BSC9131RDB_SPIFLASH_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9131RDB=y
CONFIG_FIT=y
Expand Down
1 change: 1 addition & 0 deletions configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_NXP_ESBC=y
CONFIG_ENV_SIZE=0x20000
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
Expand Down
2 changes: 2 additions & 0 deletions configs/BSC9132QDS_NAND_DDRCLK100_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,8 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x00201000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
Expand Down
1 change: 1 addition & 0 deletions configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_NXP_ESBC=y
CONFIG_ENV_SIZE=0x20000
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
Expand Down
Loading

0 comments on commit a09fea1

Please sign in to comment.