Waking STM32L073 from sleep

[donpowrie]

Note: This is just a template, so feel free to use/remove the unnecessary things

Description

• Type: Bug | Enhancement | Question
• Related issue: #abc
• Priority: Blocker | Major | Minor

---

Bug

Target
K64F|??

Toolchain:
GCC_ARM|ARM|IAR

Toolchain version:

mbed-cli version:
(mbed --version)

mbed-os sha:
(git log -n1 --oneline)

DAPLink version:

Expected behavior

Actual behavior

Steps to reproduce

---

Enhancement

Reason to enhance or problem with existing solution

Suggested enhancement

Pros

Cons

---

Question

How to?

[0xc0170]

@donpowrie Can you please provide more information about the bug? The target , toolchain, code snippet to reproduce it, expected vs actual behavior ?

I'll close this, please reopen once updated

[donpowrie]

Sorry, I'm not used to this system...

I have a STM32L073RZT6 running with no external crystals. I started the project with MBED and exported to Kyle uVision. The project works great and now I need to be able to put it to sleep for 3 seconds, wake the L073 to power up an RF transceiver to check for incoming packets, and then go back to sleep. I cannot leave the transceiver in low-power RX mode and use its interrupt output pin for incoming packets (takes too much power) so I must be able to achieve low-power (<1mA) operation via a sleep mode that the L073 can wake from using an internal peripheral.

If I call sleep() by itself the L073 goes to sleep and current draw for the system is great at 300uA. Problem is I currently cannot find a way wake the L073 from this sleep.

With this code I can use the sleep() function and use an interrupt to wake up but the current draw is about 5mA during sleep:

bool expired; //global
void int_acq1() { expired=1; } //interrupt routine

expired=0;
Ticker MyTimer;
MyTimer.attach(&int_acq1, 3.0); //3 second tick
while(expired==0) sleep();

Questions:

1. Why does sleep() behave differently, depending on the preceding line of code? If there is no Ticker code preceding the call to sleep then sleep is a very deep (300uA) sleep that will require wake with interrupt via GPIO pin (since all timers/peripherals in the L073 are off). With the Ticker code preceding the call to sleep() then current consumption is too high (5mA).
2. Where can I find documentation that explicitly explains this characteristic of sleep()? I have searched MBED and countless other places and found much on the sleep() function - but nothing on this specific topic of preceding code.
3. Is what I'm wanting to do even possible with MBED?

Thanks,
Don

[0xc0170]

@donpowrie What mbed is your app using? Mbed OS 5 ? Please provide specific version to verify how sleep is there implemented.

[donpowrie]

I exported from MBED months ago. How do I tell from within Keil uVision what the version is for the MBED?

[0xc0170]

You are working offline then. Look at mbed.h or check git sha (that can also help). What is important is to know if you use mbed 2 or mbed OS 5 (basically to answer rtos included or not).

[donpowrie]

/* mbed Microcontroller Library

• Copyright (c) 2006-2013 ARM Limited
• Licensed under the Apache License, Version 2.0 (the "License");
• you may not use this file except in compliance with the License.
• You may obtain a copy of the License at

• http://www.apache.org/licenses/LICENSE-2.0
  

I'm not intending to use an RTOS.

[donpowrie]

#ifndef MBED_H
#define MBED_H

#define MBED_LIBRARY_VERSION 153

#if MBED_CONF_RTOS_PRESENT
// RTOS present, this is valid only for mbed OS 5
#define MBED_MAJOR_VERSION 5
#define MBED_MINOR_VERSION 6
#define MBED_PATCH_VERSION 2

#else
// mbed 2
#define MBED_MAJOR_VERSION 2
#define MBED_MINOR_VERSION 0
#define MBED_PATCH_VERSION MBED_LIBRARY_VERSION
#endif

[0xc0170]

Using mbed 2, library version 153.

Ticker is running on high speed freq clock, if you defined that object, it is enabled and running , thus going to sleep would be affected (the power consumption). If you do not high precision ticker, use low power ticker (in your example 3 seconds wake up), I would rather use Low power ticker in that case.

[donpowrie]

I tried that. When I declare LowPowerTicker the current draw is even higher in sleep mode at 9-12mA.

LowPowerTicker MyTimer;
expired=0;
MyTimer.attach(&int_acq1, 6.0);
while(expired==0) sleep();

Am I using LowPowerTicker correctly?

[0xc0170]

I tried that. When I declare LowPowerTicker the current draw is even higher in sleep mode at 9-12mA.

Is that entire code snippet how to reproduce this draw on STM32L073 ? Based on the description, you have own target based on STM32L073 MCU?

@ARMmbed/team-st-mcd Please review

[jeromecoutant]

Hi

Lots of work have been done since 5.6.2 version

Please rebase to the latest version

Thx

[donpowrie]

Yes, this is the entire code for sleep mode. See my first post in this thread for the ISR.

Yes, my PCB is very small and coin cell powered. It has the STM32, an SX1280 based RF transceiver and a temperature sensor that is powered by a port pin but is powered off. The transceiver is also in sleep mode. If I call sleep() by itself the current draw from the coin cell is 300uA.

Please advise how I go about rebasing to to the latest version of MBED. Is there a document I can read for the procedure?

[donpowrie]

jeromecoutant:
Please advise how I go about rebasing to to the latest version of MBED. Is there a document I can read for the procedure?