ST-Link interface doesn't work with greentea on mac os

[LiyouZhou]

Description

• Type: Bug

---

Bug

Target
UBLOX_EVK_ODIN_W2 and NUCLEO_F429ZI

DAPLink version:
0200 works
0221 fails

Actual behavior
There is no output from the device serial console. when running mbedgt -v -V hence tests fail

[0xc0170]

cc @c1728p9 @bridadan

[bridadan]

@LiyouZhou Can you say which version of ST-Link you're using? Specifically, what is the version you downloaded from the ST website? The DAPLink version number in ST-Link releases unfortunately isn't usually up to date.

[LiyouZhou]

V2J28M18

[0xc0170]

cc @bcostm @adustm @LMESTM @jeromecoutant - to be aware

[bridadan]

@LiyouZhou I just updated a NUCLEO_F429ZI to V2J28M18 and I can successfully run mbed OS tests on it from Windows 10. Can you be more specific about your environment and project? What host OS are you using? Where are your tests located?

[LiyouZhou]

I am on Mac os. I suspect Linux might behave similar.

[jeromecoutant]

Hi

Test done with this configuration:

• MacBook Pro : OS X Yosemite – Version 10.10.15
• STLink FW : V2J28M18
• Boards : Nucleo-F429ZI
• IDE : SW4STM32
  STLink detection and enumeration OK.
  Drag and drop OK
  Run and debug OK with IDE

@LiyouZhou when you say "New version of st-link interface firmware doesn't work", I understand "V2J28M18" doesn't work. Do you know which version was working ?

[LiyouZhou]

I am talking about mbed greantea, there is problem with reset and serial communication. @mazimkhan

[mazimkhan]

@LiyouZhou can you please paste a log here. As per Brian V2J28M18 works.

[LiyouZhou]

@mazimkhan here is the log.

> mbedgt -v -V
mbedgt: greentea test automation tool ver. 1.2.5
mbedgt: using multiple test specifications from current directory!
	using 'BUILD/tests/UBLOX_EVK_ODIN_W2/GCC_ARM/test_spec.json'
test_spec
mbedgt: detecting connected mbed-enabled devices...
mbedgt: detected 2 devices
	+-------------------+----------------------+-------------------------+-----------------+--------------------------------------------------+
	| platform_name     | platform_name_unique | serial_port             | mount_point     | target_id                                        |
	+-------------------+----------------------+-------------------------+-----------------+--------------------------------------------------+
	| K64F              | K64F[0]              | /dev/tty.usbmodem141332 | /Volumes/MBED   | 024002265f1d1e48000000000000000000000000a2c4e3f0 |
	| UBLOX_EVK_ODIN_W2 | UBLOX_EVK_ODIN_W2[0] | /dev/tty.usbmodem141423 | /Volumes/MBED 1 | 123602210A4D671D3509E416                         |
	+-------------------+----------------------+-------------------------+-----------------+--------------------------------------------------+
test_build {u'mbed-os-tests-integration-basic': <mbed_greentea.tests_spec.Test instance at 0x1043a9b00>}
mbedgt: processing target 'UBLOX_EVK_ODIN_W2' toolchain 'GCC_ARM' compatible platforms... (note: switch set to --parallel 1)
	+-------------------+----------------------+--------------------------------+-----------------+--------------------------+
	| platform_name     | platform_name_unique | serial_port                    | mount_point     | target_id                |
	+-------------------+----------------------+--------------------------------+-----------------+--------------------------+
	| UBLOX_EVK_ODIN_W2 | UBLOX_EVK_ODIN_W2[0] | /dev/tty.usbmodem141423:115200 | /Volumes/MBED 1 | 123602210A4D671D3509E416 |
	+-------------------+----------------------+--------------------------------+-----------------+--------------------------+
mbedgt: running 1 test for platform 'UBLOX_EVK_ODIN_W2' and toolchain 'GCC_ARM'
	use 1 instance of execution threads for testing
mbedgt: checking for 'host_tests' directory above image directory structure
	found 'host_tests' directory in: 'mbed-os/TESTS/host_tests'
mbedgt: selecting test case observer...
	calling mbedhtrun: mbedhtrun -m UBLOX_EVK_ODIN_W2 -p /dev/tty.usbmodem141423:115200 -f "BUILD/tests/UBLOX_EVK_ODIN_W2/GCC_ARM/mbed-os/TESTS/integration/basic/basic.bin" -e "mbed-os/TESTS/host_tests" -d /Volumes/MBED 1 -C 4 -c shell -t 123602210A4D671D3509E416
mbedgt: mbed-host-test-runner: started
[1496681116.36][HTST][INF] host test executor ver. 1.1.8
[1496681116.36][HTST][INF] copy image onto target...
[1496681116.36][COPY][INF] Waiting up to 60 sec for '123602210A4D671D3509E416' mount point (current is '/Volumes/MBED 1')...
[1496681125.96][HTST][INF] starting host test process...
[1496681125.96][CONN][INF] starting connection process...
[1496681125.96][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1496681125.96][CONN][INF] initializing serial port listener...
[1496681125.96][PLGN][INF] Waiting up to 60 sec for '123602210A4D671D3509E416' serial port (current is '/dev/tty.usbmodem141423')...
[1496681125.96][HTST][INF] setting timeout to: 60 sec
[1496681126.37][SERI][INF] serial(port=/dev/tty.usbmodem141423, baudrate=115200, read_timeout=0.01, write_timeout=5)
[1496681126.37][SERI][INF] reset device using 'default' plugin...
[1496681126.77][SERI][INF] waiting 1.00 sec after reset
[1496681127.77][SERI][INF] wait for it...
[1496681127.77][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1496681127.77][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[1496681127.78][CONN][INF] sending preamble 'b8ffb1d9-2771-4ad2-9189-cdddb36e3504'
[1496681127.78][SERI][TXD] {{__sync;b8ffb1d9-2771-4ad2-9189-cdddb36e3504}}
[1496681127.79][CONN][RXD] $$$123602210A4D671D3509E416init_spi: instance=0x40013400
[1496681127.79][CONN][RXD] spi_format, bits:8, mode:0, slave?:0
[1496681127.79][CONN][RXD] init_spi: instance=0x40013400
[1496681127.79][CONN][RXD] spi_frequency, request:1000000, select:656250
[1496681128.78][CONN][INF] resending new preamble '3f65393c-8413-44c5-8a94-087b455710c9' after 1.00 sec
[1496681128.78][SERI][TXD] {{__sync;3f65393c-8413-44c5-8a94-087b455710c9}}
[1496681186.96][HTST][INF] test suite run finished after 61.00 sec...
[1496681186.96][CONN][INF] received special even '__host_test_finished' value='True', finishing
[1496681186.97][HTST][INF] CONN exited with code: 0
[1496681186.97][HTST][INF] No events in queue
[1496681186.97][HTST][INF] stopped consuming events
[1496681186.97][HTST][INF] host test result(): None
[1496681186.97][HTST][WRN] missing __exit event from DUT
[1496681186.97][HTST][WRN] missing __exit_event_queue event from host test
[1496681186.97][HTST][ERR] missing __exit_event_queue event from host test and no result from host test, timeout...
[1496681186.97][HTST][INF] calling blocking teardown()
[1496681186.97][HTST][INF] teardown() finished
[1496681186.97][HTST][INF] {{result;timeout}}
mbedgt: checking for GCOV data...
mbedgt: mbed-host-test-runner: stopped and returned 'TIMEOUT'
mbedgt: test case summary event not found
	no test case report present, assuming test suite to be a single test case!
	test suite: mbed-os-tests-integration-basic
	test case: mbed-os-tests-integration-basic
mbedgt: test on hardware with target id: 123602210A4D671D3509E416
mbedgt: test suite 'mbed-os-tests-integration-basic' ................................................. TIMEOUT in 71.10 sec
	test case: 'mbed-os-tests-integration-basic' ................................................. ERROR in 71.10 sec
mbedgt: test case summary: 0 passes, 1 failure
mbedgt: all tests finished!
mbedgt: shuffle seed: 0.8700783930
mbedgt: test suite report:
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
| target                    | platform_name     | test suite                      | result  | elapsed_time (sec) | copy_method |
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
| UBLOX_EVK_ODIN_W2-GCC_ARM | UBLOX_EVK_ODIN_W2 | mbed-os-tests-integration-basic | TIMEOUT | 71.1               | shell       |
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
mbedgt: test suite results: 1 TIMEOUT
mbedgt: test case report:
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
| target                    | platform_name     | test suite                      | test case                       | passed | failed | result | elapsed_time (sec) |
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
| UBLOX_EVK_ODIN_W2-GCC_ARM | UBLOX_EVK_ODIN_W2 | mbed-os-tests-integration-basic | mbed-os-tests-integration-basic | 0      | 1      | ERROR  | 71.1               |
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
mbedgt: test case results: 1 ERROR
mbedgt: completed in 72.34 sec
mbedgt: exited with code 1

[LiyouZhou]

I think @bridadan is working on windows where I am using a mac.

[bridadan]

@LiyouZhou Are the following lines from the log coming from your application? These are being received from the device. It is not normal for the test mbed-os-tests-integration-basic to be printing these messages.

[1496681127.79][CONN][RXD] $$$123602210A4D671D3509E416init_spi: instance=0x40013400
[1496681127.79][CONN][RXD] spi_format, bits:8, mode:0, slave?:0
[1496681127.79][CONN][RXD] init_spi: instance=0x40013400
[1496681127.79][CONN][RXD] spi_frequency, request:1000000, select:656250

[bridadan]

Ah, it seems that those are debug prints that are coming from the STM hal. What version of mbed OS are you using? If you have the project uploaded somewhere, could you send it to me?

It looks like greentea is receiving printfs from the device, however the device is not responding to the sync commands. If you're using any released version of mbed OS though this shouldn't be an issue of the device crashing since we test for that before each release for that platform.

[LiyouZhou]

Ok Lets try again:

> mbed new myprog
[mbed] Creating new program "myprog" (git)
[mbed] Adding library "mbed-os" from "ssh://git@github.com/ARMmbed/mbed-os.git" at branch latest
[mbed] Updating reference "mbed-os" -> "https://github.com/ARMmbed/mbed-os/#5fff7e1daeb395aa3d1ecf3f9ec3f4fead3de0c2"
>  cd myprog
>  mbed target UBLOX_EVK_ODIN_W2
[mbed] UBLOX_EVK_ODIN_W2 now set as default target in program "myprog"
>  mbed toolchain GCC_ARM
[mbed] GCC_ARM now set as default toolchain in program "myprog"
>  mbed test -n mbed-os-tests-integration-basic
...
...
> mbedgt -v -V
mbedgt: greentea test automation tool ver. 1.2.5
mbedgt: using multiple test specifications from current directory!
	using 'BUILD/tests/UBLOX_EVK_ODIN_W2/GCC_ARM/test_spec.json'
test_spec
mbedgt: detecting connected mbed-enabled devices...
mbedgt: detected 1 device
	+-------------------+----------------------+-------------------------+---------------+--------------------------+
	| platform_name     | platform_name_unique | serial_port             | mount_point   | target_id                |
	+-------------------+----------------------+-------------------------+---------------+--------------------------+
	| UBLOX_EVK_ODIN_W2 | UBLOX_EVK_ODIN_W2[0] | /dev/tty.usbmodem141423 | /Volumes/MBED | 123602210A4D671D3509E416 |
	+-------------------+----------------------+-------------------------+---------------+--------------------------+
test_build {u'mbed-os-tests-integration-basic': <mbed_greentea.tests_spec.Test instance at 0x10e642b00>}
mbedgt: processing target 'UBLOX_EVK_ODIN_W2' toolchain 'GCC_ARM' compatible platforms... (note: switch set to --parallel 1)
	+-------------------+----------------------+------------------------------+---------------+--------------------------+
	| platform_name     | platform_name_unique | serial_port                  | mount_point   | target_id                |
	+-------------------+----------------------+------------------------------+---------------+--------------------------+
	| UBLOX_EVK_ODIN_W2 | UBLOX_EVK_ODIN_W2[0] | /dev/tty.usbmodem141423:9600 | /Volumes/MBED | 123602210A4D671D3509E416 |
	+-------------------+----------------------+------------------------------+---------------+--------------------------+
mbedgt: running 1 test for platform 'UBLOX_EVK_ODIN_W2' and toolchain 'GCC_ARM'
	use 1 instance of execution threads for testing
mbedgt: checking for 'host_tests' directory above image directory structure
	found 'host_tests' directory in: 'mbed-os/TESTS/host_tests'
mbedgt: selecting test case observer...
	calling mbedhtrun: mbedhtrun -m UBLOX_EVK_ODIN_W2 -p /dev/tty.usbmodem141423:9600 -f "BUILD/tests/UBLOX_EVK_ODIN_W2/GCC_ARM/mbed-os/TESTS/integration/basic/basic.bin" -e "mbed-os/TESTS/host_tests" -d /Volumes/MBED -C 4 -c shell -t 123602210A4D671D3509E416
mbedgt: mbed-host-test-runner: started
[1496740618.70][HTST][INF] host test executor ver. 1.1.8
[1496740618.70][HTST][INF] copy image onto target...
[1496740618.70][COPY][INF] Waiting up to 60 sec for '123602210A4D671D3509E416' mount point (current is '/Volumes/MBED')...
[1496740625.14][HTST][INF] starting host test process...
[1496740625.15][CONN][INF] starting connection process...
[1496740625.15][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1496740625.15][CONN][INF] initializing serial port listener...
[1496740625.15][PLGN][INF] Waiting up to 60 sec for '123602210A4D671D3509E416' serial port (current is '/dev/tty.usbmodem141423')...
[1496740625.15][HTST][INF] setting timeout to: 60 sec
[1496740626.13][SERI][INF] serial(port=/dev/tty.usbmodem141423, baudrate=9600, read_timeout=0.01, write_timeout=5)
[1496740626.13][SERI][INF] reset device using 'default' plugin...
[1496740626.53][SERI][INF] waiting 1.00 sec after reset
[1496740627.54][SERI][INF] wait for it...
[1496740627.54][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1496740627.54][CONN][INF] sending up to 2 __sync packets (specified with --sync=2)
[1496740627.54][CONN][INF] sending preamble 'daf05fa9-7e71-496b-b76e-9fc4fe715a4b'
[1496740627.54][SERI][TXD] {{__sync;daf05fa9-7e71-496b-b76e-9fc4fe715a4b}}
[1496740628.55][CONN][INF] resending new preamble 'aa6416f6-7e8a-49cb-9127-39b4d0cc1c72' after 1.01 sec
[1496740628.55][SERI][TXD] {{__sync;aa6416f6-7e8a-49cb-9127-39b4d0cc1c72}}
[1496740685.27][HTST][INF] test suite run finished after 60.12 sec...
[1496740685.28][CONN][INF] received special even '__host_test_finished' value='True', finishing
[1496740685.29][HTST][INF] CONN exited with code: 0
[1496740685.29][HTST][INF] No events in queue
[1496740685.29][HTST][INF] stopped consuming events
[1496740685.29][HTST][INF] host test result(): None
[1496740685.29][HTST][WRN] missing __exit event from DUT
[1496740685.29][HTST][WRN] missing __exit_event_queue event from host test
[1496740685.29][HTST][ERR] missing __exit_event_queue event from host test and no result from host test, timeout...
[1496740685.29][HTST][INF] calling blocking teardown()
[1496740685.29][HTST][INF] teardown() finished
[1496740685.29][HTST][INF] {{result;timeout}}
mbedgt: checking for GCOV data...
mbedgt: mbed-host-test-runner: stopped and returned 'TIMEOUT'
mbedgt: test case summary event not found
	no test case report present, assuming test suite to be a single test case!
	test suite: mbed-os-tests-integration-basic
	test case: mbed-os-tests-integration-basic
mbedgt: test on hardware with target id: 123602210A4D671D3509E416
mbedgt: test suite 'mbed-os-tests-integration-basic' ................................................. TIMEOUT in 67.11 sec
	test case: 'mbed-os-tests-integration-basic' ................................................. ERROR in 67.11 sec
mbedgt: test case summary: 0 passes, 1 failure
mbedgt: all tests finished!
mbedgt: shuffle seed: 0.3395421590
mbedgt: test suite report:
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
| target                    | platform_name     | test suite                      | result  | elapsed_time (sec) | copy_method |
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
| UBLOX_EVK_ODIN_W2-GCC_ARM | UBLOX_EVK_ODIN_W2 | mbed-os-tests-integration-basic | TIMEOUT | 67.11              | shell       |
+---------------------------+-------------------+---------------------------------+---------+--------------------+-------------+
mbedgt: test suite results: 1 TIMEOUT
mbedgt: test case report:
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
| target                    | platform_name     | test suite                      | test case                       | passed | failed | result | elapsed_time (sec) |
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
| UBLOX_EVK_ODIN_W2-GCC_ARM | UBLOX_EVK_ODIN_W2 | mbed-os-tests-integration-basic | mbed-os-tests-integration-basic | 0      | 1      | ERROR  | 67.11              |
+---------------------------+-------------------+---------------------------------+---------------------------------+--------+--------+--------+--------------------+
mbedgt: test case results: 1 ERROR
mbedgt: completed in 67.88 sec
mbedgt: exited with code 1

[jeromecoutant]

Hi
You are pointing on the top of master branch.
We got several issues since #4294 merge...
Please set mbed-os before this merge, and try again
Thx