Closed
Description
Description of defect
tests-mbed_hal-pinmap always fails on EFM32. The LED shows the mbed crash pattern after I run it. Other tests apart of #12373 are fine.
It errors out at gpio_pinmap with:
Expected 4294967295 Was -1
If I comment out gpio_pinmap, then the test fails at gpio_irq_pinmap, also with a crash.
Target(s) affected by this defect ?
Verified on EFM32GG_STK3700, EFM32PG12_STK3402 and EFM32GG11_STK3701, most probably affects all EFM32 targets.
Toolchain(s) (name and version) displaying this defect ?
GNU Tools Arm Embedded 9 2019-q4-major
What version of Mbed-os are you using (tag or sha) ?
master at f73a62afbf4052b4da8c5b862ffb4708a80c1b6e
Also verified with:
mbed-os-5.13.4 at 1bf6b20df9d3cd5f29f001ffc6f0d0fcbbb96118
What version(s) of tools are you using. List all that apply (E.g. mbed-cli)
mbed-cli 1.10.2
How is this defect reproduced ?
mbed test --run -t GCC_ARM -m EFM32PG12_STK3402 -DMBED_EXTENDED_TESTS=1 -n tests-mbed_hal-pinmap -v
mbedgt: greentea test automation tool ver. 1.7.4
mbedgt: test specification file '.\BUILD\tests\EFM32PG12_STK3402\GCC_ARM\test_spec.json' (specified with --test-spec option)
mbedgt: using '.\BUILD\tests\EFM32PG12_STK3402\GCC_ARM\test_spec.json' from current directory!
mbedgt: detecting connected mbed-enabled devices...
[1580903499.40][mbedls.lstools_base]No valid file found to update JLink device details
mbedgt: detected 1 device
| platform_name | platform_name_unique | serial_port | mount_point | target_id |
|-------------------|----------------------|-------------|-------------|--------------------------|
| EFM32PG12_STK3402 | EFM32PG12_STK3402[0] | COM5 | D: | 204003F00001DCA9D5A8EF33 |
mbedgt: processing target 'EFM32PG12_STK3402' toolchain 'GCC_ARM' compatible platforms... (note: switch set to --parallel 1)
| platform_name | platform_name_unique | serial_port | mount_point | target_id |
|-------------------|----------------------|-------------|-------------|--------------------------|
| EFM32PG12_STK3402 | EFM32PG12_STK3402[0] | COM5:115200 | D: | 204003F00001DCA9D5A8EF33 |
mbedgt: test case filter (specified with -n option)
tests-mbed_hal-pinmap
test filtered in 'tests-mbed_hal-pinmap'
mbedgt: running 1 test for platform 'EFM32PG12_STK3402' and toolchain 'GCC_ARM'
use 1 instance of execution threads for testing
mbedgt: checking for 'host_tests' directory above image directory structure
found 'host_tests' directory in: 'TESTS\host_tests'
mbedgt: selecting test case observer...
calling mbedhtrun: mbedhtrun -m EFM32PG12_STK3402 -p COM5:115200 -f "BUILD/tests/EFM32PG12_STK3402/GCC_ARM/TESTS/mbed_hal/pinmap/pinmap.bin" -e "TESTS\host_tests" -d D: -c default -t 204003F00001DCA9D5A8EF33 -r default -C 4 -R 2 --sync 5 -P 60
mbedgt: mbed-host-test-runner: started
[1580903500.19][HTST][INF] host test executor ver. 0.0.12
[1580903500.19][HTST][INF] copy image onto target...
[1580903500.19][COPY][INF] Waiting up to 60 sec for '204003F00001DCA9D5A8EF33' mount point (current is 'D:')...
[1580903500.21][mbedls.lstools_base]No valid file found to update JLink device details
1 file(s) copied.
[1580903506.78][mbedls.lstools_base]No valid file found to update JLink device details
[1580903507.33][mbedls.lstools_base]No valid file found to update JLink device details
[1580903507.88][mbedls.lstools_base]No valid file found to update JLink device details
[1580903508.43][mbedls.lstools_base]No valid file found to update JLink device details
[1580903508.99][mbedls.lstools_base]No valid file found to update JLink device details
[1580903509.50][HTST][INF] starting host test process...
[1580903510.29][CONN][INF] starting connection process...
[1580903510.29][CONN][INF] notify event queue about extra 60 sec timeout for serial port pooling
[1580903510.29][CONN][INF] initializing serial port listener...
[1580903510.29][PLGN][INF] Waiting up to 60 sec for '204003F00001DCA9D5A8EF33' serial port (current is 'COM5')...
[1580903510.30][HTST][INF] setting timeout to: 60 sec
[1580903510.31][mbedls.lstools_base]No valid file found to update JLink device details
[1580903510.31][SERI][INF] serial(port=COM5, baudrate=115200, read_timeout=0.01, write_timeout=5)
[1580903510.31][SERI][INF] reset device using 'default' plugin...
[1580903510.57][SERI][INF] waiting 2.00 sec after reset
[1580903512.57][SERI][INF] wait for it...
[1580903512.57][SERI][TXD] mbedmbedmbedmbedmbedmbedmbedmbedmbedmbed
[1580903512.57][CONN][INF] sending up to 5 __sync packets (specified with --sync=5)
[1580903512.57][CONN][INF] sending preamble 'cccb9c00-961a-4776-a054-06c20b165435'
[1580903512.57][SERI][TXD] {{__sync;cccb9c00-961a-4776-a054-06c20b165435}}
[1580903512.59][CONN][RXD] mbedmbedmbedmbedmbedmbedmbedmbed
[1580903512.59][CONN][INF] found SYNC in stream: {{__sync;cccb9c00-961a-4776-a054-06c20b165435}} it is #0 sent, queued...
[1580903512.59][CONN][INF] found KV pair in stream: {{__version;1.3.0}}, queued...
[1580903512.59][CONN][INF] found KV pair in stream: {{__timeout;20}}, queued...
[1580903512.60][HTST][INF] sync KV found, uuid=cccb9c00-961a-4776-a054-06c20b165435, timestamp=1580903512.594363
[1580903512.60][HTST][INF] DUT greentea-client version: 1.3.0
[1580903512.60][HTST][INF] setting timeout to: 20 sec
[1580903512.61][CONN][RXD] >>> Running 1 test cases...
[1580903512.61][CONN][RXD]
[1580903512.61][CONN][INF] found KV pair in stream: {{__host_test_name;default_auto}}, queued...
[1580903512.61][CONN][INF] found KV pair in stream: {{__testcase_count;1}}, queued...
[1580903512.61][CONN][INF] found KV pair in stream: {{__testcase_name;pinmap - validation}}, queued...
[1580903512.61][HTST][INF] host test class: '<class 'mbed_os_tools.test.host_tests.default_auto.DefaultAuto'>'
[1580903512.61][HTST][INF] host test setup() call...
[1580903512.61][HTST][INF] CALLBACKs updated
[1580903512.61][HTST][INF] host test detected: default_auto
[1580903512.62][CONN][RXD] >>> Running case #1: 'pinmap - validation'...
[1580903512.62][CONN][RXD] Testing pinmap gpio_pinmap
[1580903512.62][CONN][INF] found KV pair in stream: {{__testcase_start;pinmap - validation}}, queued...
mbedgt: :114::FAIL: Expected 4294967295 Was -1
[1580903512.64][CONN][RXD] :114::FAIL: Expected 4294967295 Was -1
[1580903512.64][CONN][INF] found KV pair in stream: {{__testcase_finish;pinmap - validation;0;1}}, queued...
[1580903512.65][CONN][RXD] >>> 'pinmap - validation': 0 passed, 1 failed with reason 'Assertion Failed'
[1580903512.65][CONN][RXD]
[1580903512.65][CONN][RXD] >>> Test cases: 0 passed, 1 failed with reason 'Assertion Failed'
[1580903512.65][CONN][RXD] >>> TESTS FAILED!
[1580903512.65][CONN][INF] found KV pair in stream: {{__testcase_summary;0;1}}, queued...
[1580903512.65][CONN][INF] found KV pair in stream: {{end;failure}}, queued...
[1580903512.65][CONN][INF] found KV pair in stream: {{__exit;0}}, queued...
[1580903512.65][HTST][INF] __exit(0)
[1580903512.65][HTST][INF] __notify_complete(False)
[1580903512.65][HTST][INF] __exit_event_queue received
[1580903512.65][HTST][INF] test suite run finished after 0.06 sec...
[1580903512.66][CONN][INF] received special event '__host_test_finished' value='True', finishing
[1580903512.70][HTST][INF] CONN exited with code: 0
[1580903512.70][HTST][INF] Some events in queue
[1580903512.70][HTST][INF] stopped consuming events
[1580903512.70][HTST][INF] host test result() call skipped, received: False
[1580903512.70][HTST][INF] calling blocking teardown()
[1580903512.70][HTST][INF] teardown() finished
[1580903512.70][HTST][INF] {{result;failure}}
mbedgt: retry mbedhtrun 1/1
mbedgt: ['mbedhtrun', '-m', 'EFM32PG12_STK3402', '-p', 'COM5:115200', '-f', '"BUILD/tests/EFM32PG12_STK3402/GCC_ARM/TESTS/mbed_hal/pinmap/pinmap.bin"', '-e', '"TESTS\\host_tests"', '-d', 'D:', '-c', 'default', '-t', '204003F00001DCA9D5A8EF33', '-r', 'default', '-C', '4', '-R', '2', '--sync', '5', '-P', '60'] failed after 1 count
mbedgt: checking for GCOV data...
mbedgt: mbed-host-test-runner: stopped and returned 'FAIL'
mbedgt: test on hardware with target id: 204003F00001DCA9D5A8EF33
mbedgt: test suite 'tests-mbed_hal-pinmap' ........................................................... FAIL in 13.03 sec
test case: 'pinmap - validation' ............................................................. FAIL in 0.02 sec
mbedgt: test case summary: 0 passes, 1 failure
mbedgt: all tests finished!
mbedgt: shuffle seed: 0.5712273915
mbedgt: test suite report:
| target | platform_name | test suite | result | elapsed_time (sec) | copy_method |
|---------------------------|-------------------|-----------------------|--------|--------------------|-------------|
| EFM32PG12_STK3402-GCC_ARM | EFM32PG12_STK3402 | tests-mbed_hal-pinmap | FAIL | 13.03 | default |
mbedgt: test suite results: 1 FAIL
mbedgt: test case report:
| target | platform_name | test suite | test case | passed | failed | result | elapsed_time (sec) |
|---------------------------|-------------------|-----------------------|---------------------|--------|--------|--------|--------------------|
| EFM32PG12_STK3402-GCC_ARM | EFM32PG12_STK3402 | tests-mbed_hal-pinmap | pinmap - validation | 0 | 1 | FAIL | 0.02 |
mbedgt: test case results: 1 FAIL
mbedgt: completed in 13.36 sec
mbedgt: exited with code 1
[mbed] Working path "C:\Users\amq\mbed-os" (program)
[mbed] Exec "mbedgt --test-spec .\BUILD\tests\EFM32PG12_STK3402\GCC_ARM\test_spec.json -n tests-mbed_hal-pinmap -V" in "C:\Users\amq\mbed-os"
[mbed] ERROR: "mbedgt" returned error.
Code: 1
Path: "C:\Users\amq\mbed-os"
Command: "mbedgt --test-spec .\BUILD\tests\EFM32PG12_STK3402\GCC_ARM\test_spec.json -n tests-mbed_hal-pinmap -V"
---