- Added WiFi Shield layers

- Added USB Host EHCI (TT) driver

- Added USB Host OHCI driver

- Align with CMSIS v6

- Added Renesas DA16200 WiFi driver

- Updated Inventek ISM43362 WiFi driver (version 1.14.0):
  - Added statically allocated control block for asynchronous thread if FreeRTOS is used

- Added support for Arm Cortex-M85 processor based devices

- Added support for Arm China Star-MC1 processor based devices

- Added PHY_LAN8740A driver

- Added ETH_LAN91C111 driver
- Updated ETH_KSZ8851SNL and ETH_LAN9220 drivers:
  - Corrected invalid power status in MAC_PowerControl
- Updated ESP8266 WiFi driver:
  - Fixed Activate to use BSSID specified in SetOption with ARM_WIFI_BSSID
- Updated ESP8266, ESP32 and WizFi360 WiFi drivers:
  - Fixed return string null terminator in GetModuleInfo
  - Fixed SocketSendTo for stream socket lengths above 2048 bytes
  - Enabled placement of USART transfer buffers in appropriate RAM by using section
    ".bss.driver.usartn" (n = USART driver instance number) in the linker scatter file
- Updated Inventek ISM43362 WiFi driver (version 1.13.0):
  - Supports also ISM43340 Module
  - Added configuration for asynchronous thread stack size
  - Added support for 5 GHz channels on Access Point
  - Fixed socket connect operation for non-blocking mode
  - Enabled placement of SPI transfer buffers in appropriate RAM by using section
    ".bss.driver.spin" (n = SPI driver instance number) in the linker scatter file
  - Detected ISM43362 Module on STMicroelectronics B-L475E-IOT01A1 firmware limitation:
    SocketConnect does not work if first or last octet of IP address is 0
    (for example IPs 0.x.y.z or x.y.z.0 do not work)
  - Detected shield firmware limitation: SocketConnect does not work if
    certain IP address octets contain value 0 or 255
    (combinations that do not work: 0.x.y.z, x.y.z.0, 255.x.y.z)
  - Updated CMSIS Driver Validation test results

- Updated ESP8266, ESP32 and WizFi360 WiFi drivers:

  - Added auto protocol selection in SocketCreate
  - Fixed socket default timeout (zero == no time out)
  - Fixed SocketRecv/RecvFrom non blocking mode when received less than buffer length
- Updated Inventek ISM43362 WiFi driver (version 1.9.0):
  - Corrected Initialize function failure if called shortly after reset
  - Corrected default protocol selection in SocketCreate function
  - Detected STM firmware limitation: SocketConnect does not
    work if any of IP address octets is 255 (for example IP like x.y.z.255)

- Updated ESP8266, ESP32 and WizFi360 WiFi drivers:

  - API V1.1: SocketSend/SendTo and SocketRecv/RecvFrom (support for polling)
  - Added DHCP setting before station Activate
  - Added read of DHCP assigned IPs after station activate
  - Fixed serial tx busy flag handling
  - Fixed function AT_Resp_ConnectAP for NULL argument
  - Enhanced serial communication startup procedure
- Updated Inventek ISM43362 WiFi driver (version 1.8.0):
  - API V1.1: SocketSend/SendTo and SocketRecv/RecvFrom (support for polling)
  - Corrected GetModuleInfo return string termination
  - Corrected functionality when DATARDY line is used in polling mode
  - Corrected SocketConnect function never returning 0 in non-blocking mode
  - Corrected SocketRecv/SocketRecvFrom function polling if called without previous Bind
  - Corrected delay after module reset
  - For non-STM firmware variant only firmware version 6.2.1.7 is supported
- Documented firmware update procedure for Inventek ISMART43362-E WiFi Shield

- Added Espressif ESP32 WiFi driver

- Added Espressif ESP8266 WiFi driver
- Added Wiznet WizFi360 WiFi driver
- Updated Inventek ISM43362 WiFi driver (version 1.3.0):
  - Fixed SocketClose functionality
  - Fixed Activate function not to set password if OPEN security is used
  - Updated Initialization function to handle unavailable reset pin
  - Added debug of SPI traffic with Event Recorder
  - Added CMSIS Driver Validation test results

- Updated Inventek ISM43362 WiFi driver

- Corrected PHY_LAN8742A power down bit definition