R7000-touchpad

（一）.自动安装： 下载后解压，以root权限运行install.sh，若提示失败，请检查目录是否完整或手动安装

$sudo chmod +x install.sh

$sudo ./install.sh

$reboot

将在重启后生效

（二）.手动安装：

1.下载后解压并make

$ make

2.将得到的i2c-hid.ko复制到指定路径

$ sudo cp /path/to/i2c-hid.ko /lib/modules/$(uname -r)/kernel/drivers/hid/i2c-hid/i2c-hid.ko

3.然后添加i2c_hid.polling_mode=1到内核命令行

使用文本编辑器以root身份打开/ etc / default / grub，然后将

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" 替换为

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i2c_hid.polling_mode=1"

最后保存更改。

4.最后运行

$ sudo update-grub

$ sudo update-initramfs -u

$reboot

将在重启后生效

(1).automatic installation:

After downloading, unzip and run as root install.sh If the prompt fails, please check whether the directory is complete or manually installed

$sudo chmod +x install.sh

$sudo ./install.sh

$reboot

Will take effect after restart

(2).manual installation:

1.Unzip and make after downloading

$make

2.The I2C will be obtained- hid.ko Copy to specified path

$sudo cp /path/to/i2c- hid.ko /lib/modules/$(uname -r)/kernel/drivers/hid/i2c-hid/i2c- hid.ko

3.Then add I2C_ hid.polling_ Mode = 1 to the kernel command line

Open / etc / default / grub as root using a text editor, and then

GRUB_ CMDLINE_ LINUX_ Default = "quiet splash" is replaced by

GRUB_ CMDLINE_ LINUX_ DEFAULT="quiet splash i2c_ hid.polling_ mode=1"

Finally, save the changes.

4.Final operation

$sudo update-grub

$ sudo update-initramfs -u

$reboot

Will take effect after restart