ti_mspm0l1306.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# Texas Instruments MSPM0L1306 - ARM Cortex-0+ @ up to 32 MHz
#
# https://www.ti.com/product/MSPM0L1306
#

if { [info exists CHIPNAME] } {
	set _CHIPNAME $CHIPNAME
} else {
	set _CHIPNAME mspm0l1306
}

if { [info exists CPUTAPID] } {
	set _DAP_TAPID $CPUTAPID
} else {
	set _DAP_TAPID 0x4ba00477
}

if { [info exists DAP_SWD_ID] } {
	set _DAP_SWD_ID $DAP_SWD_ID
} else {
	set _DAP_SWD_ID 0x2ba01477
}

source [find target/swj-dp.tcl]

if { [using_jtag] } {
	set _DAP_ID $_DAP_TAPID
} else {
	set _DAP_ID $_DAP_SWD_ID
}

swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_DAP_ID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap

if { [info exists WORKAREASIZE] } {
   set _WORKAREASIZE $WORKAREASIZE
} else {
   set _WORKAREASIZE 0x1000
}

# Allow overriding the Flash bank size
if { [info exists FLASH_SIZE] } {
    set _FLASH_SIZE $FLASH_SIZE
} else {
    # autodetect size
    set _FLASH_SIZE 0
}

$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0

# set _FLASHNAME $_CHIPNAME.flash
# flash bank $_FLASHNAME msp432 0x41C0 0 0 0 $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME msp432 0x00000000 $_FLASH_SIZE 0 0 $_TARGETNAME

cortex_m reset_config sysresetreq