New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

CI: Test checkpatch #3

Closed

EmbeddedAndroid wants to merge 1 commit into zephyrproject-rtos:master from EmbeddedAndroid:master

Contributor

EmbeddedAndroid commented Mar 24, 2017

Just a test

Signed-off-by: Tyler Baker tyler.baker@linaro.org

Contributor Author

EmbeddedAndroid commented Mar 24, 2017

recheck

3 similar comments

Contributor Author

EmbeddedAndroid commented Mar 24, 2017

recheck

Contributor Author

EmbeddedAndroid commented Mar 24, 2017

recheck

Contributor Author

EmbeddedAndroid commented Mar 24, 2017

recheck


          CI: Test checkpatch

6d6ee9d

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>

EmbeddedAndroid closed this

mike-scott mentioned this pull request

Introduce LWM2M subsystem for Zephyr #712

Merged

This was referenced Sep 23, 2017

software hang at printk with "CONFIG_STACK_CANARIES=y" #1603

Closed

task_mem_map_used_get() keep decreasing even when free unallocated blocks #1972

Closed

Network TCP API is adhoc and makes arbitrary assumptions #2256

Closed

Tinycrypt SHA256 test fails with system crash using unified kernel type #2636

Closed

Tinycrypt SHA256 test blocks at test vector 13 and 14 with microkernel #2637

Closed

Tinycrypt AES128 fixed-key with variable-text test fails using unified kernel type #2639

Closed

LL_ASSERT in event_common_prepare #3287

Closed

LL_ASSERT in isr_radio_state_close() #3300

Closed

Controller gets stuck when disabling advertising (no assert) #3386

Closed

tests/net/ieee802154/l2 uses semaphore before initialization #3753

Closed

Disabling advertising gets stuck #3774

Closed

NULL pointer read in udp, tcp, context net tests #3800

Closed

TCP is broken by Zephyr commit 3604c391e #3813

Closed

net_if_ipv6_addr_rm calls k_delayed_work_cancel() on uninitialized k_delayed_work object #3830

Closed

mike-scott mentioned this pull request

new HTTP API bugfixes #4882

Merged

andrewboie mentioned this pull request

Add ARM userspace infrastructure #4974

Merged

nagineni pushed a commit to nagineni/zephyr that referenced this pull request


          [scripts] New script 'trlite' to run Travis tests locally (zephyrproj…

ecbd945

…ect-rtos#493)

* [scripts] New script 'trlite' to run Travis tests locally

With no args, runs all the tests.
"trlite zephyr" runs just the VM zephyrproject-rtos#1 "zephyr" tests.
"trlite linux"  runs just the VM zephyrproject-rtos#2 "linux"  tests.
"trlite ashell" runs just the VM zephyrproject-rtos#3 "ashell" tests.
You can also just pass the VM# instead (1, 2, or 3).

Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>

* [trlite] Add -v flag for verbose output, change to off by default

Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>

nagineni pushed a commit to nagineni/zephyr that referenced this pull request


          [build] Add "make check" and "make quickcheck" build targets (zephyrp…

0531ab6

…roject-rtos#907)

The check target calls trlite with a new -l flag that makes it run
on the current ZJS_BASE source tree w/o doing a git clone for a clean
tree.

The quickcheck calls trlite on just the Linux tests (VM zephyrproject-rtos#3).

Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>

locomuco added a commit to locomuco/zephyr that referenced this pull request


          Merge pull request zephyrproject-rtos#3 from grandcat/board-nfct-pins

a630040

boards: tado_ru02xx: fix NFCT config and flash page API

GAnthony mentioned this pull request

[WIP][RFC] net: mqtt: Port MQTT library to BSD sockets #5854

Closed

Shilpashree3lc-zz mentioned this pull request

Update Zephyr Licensing page #6038

Closed

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

f86c380

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

bfe6ac9

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

c6b880f

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

0c946a3

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

0a46e2e

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

10e3d33

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

b7146d2

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

9cf95ba

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

eb49dde

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

60da9ec

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

d84632e

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

7f515ea

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

d8806b9

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

6dcff4b

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

c842e3f

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

4e4824a

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

139be14

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

9120b08

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

krish2718 mentioned this pull request

hostap: Security improvements #74847

Merged

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

7e80e96

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

257e987

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

434fe4a

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685s/hifi4: Instantiate devs for audio

0df3df5

Instantiate Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA zephyrproject-rtos#1 and I3C - these are
peripherals responsible for audio playback and capture on the i.MX
RT685's HiFi 4 domain. Reconfigure IRQ allocation.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          board: mimxrt685_evk/mimxrt685s/hifi4: Add init code

b7a50ef

Add initialisation code for the HiFi 4 DSP domain of the mimxrt685_evk
board. Responsible for setting up signal sharing between Flexcomm zephyrproject-rtos#1 and
Flexcomm zephyrproject-rtos#3 peripherals both in the I2S mode (simultaneous audio
playback and capture).

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

VitekST added a commit to VitekST/zephyr that referenced this pull request


          dts: mimxrt685_evk/mimxrt685s/hifi4: Enable devs for audio

944ab51

Instantiate, configure and enable Flexcomm zephyrproject-rtos#1, Flexcomm zephyrproject-rtos#3, DMA, I3C for
audio capture and playback on mimxrt685_evk's HiFi 4 DSP domain. Add
pinmux definitions for those.

Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>

ruehlchris mentioned this pull request

Drivers: Sensors: Bosch bmp390 merge into bmp388 #77907

Merged

kartben mentioned this pull request

doc: sphinx-lint: fix bad usage of "default role" (single backticks) #78266

Merged

swkim101 added a commit to swkim101/zephyr that referenced this pull request


          Bluetooth: userchan: fix buffer overflow hci_packet_complete()

1807c99

hci_packet_complete(buf, buf_size) should check whether buf_size is
enough.
For instance, hci_packet_complete can receive buf with buf_size 1,
leading to the buffer overflow in cmd->param_len, which is buf[3].
This can happen when rx_thread() receives two frames in over 512 bytes
and the first frame size is 511. Then, rx_thread() will call
hci_packet_complete() with 1.

==5==ERROR: AddressSanitizer: global-buffer-overflow on address 0x000000ad81c2 at pc 0x0000005279b3 bp 0x7fffe74f5b70 sp 0x7fffe74f5b68

READ of size 2 at 0x000000ad81c2 thread T6
    #0 0x5279b2  (/root/zephyr.exe+0x5279b2)
    zephyrproject-rtos#1 0x4d697d  (/root/zephyr.exe+0x4d697d)
    zephyrproject-rtos#2 0x7ffff60e5daa  (/lib/x86_64-linux-gnu/libc.so.6+0x89daa) (BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)

0x000000ad81c2 is located 2 bytes to the right of global variable 'rx_thread.frame' defined in '/mnt/hdd1/sungwoo/zephyr-afl/zephyr/drivers/bluetooth/hci/userchan.c' (0xad7fc0) of size 512
SUMMARY: AddressSanitizer: global-buffer-overflow (/root/zephyr.exe+0x5279b2)
Thread T6 created by T2 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x530192  (/root/zephyr.exe+0x530192)
    zephyrproject-rtos#2 0x4dcc22  (/root/zephyr.exe+0x4dcc22)

Thread T2 created by T1 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x530192  (/root/zephyr.exe+0x530192)
    zephyrproject-rtos#2 0x4dcc22  (/root/zephyr.exe+0x4dcc22)

Thread T1 created by T0 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x52f36c  (/root/zephyr.exe+0x52f36c)
    zephyrproject-rtos#2 0x5371dc  (/root/zephyr.exe+0x5371dc)
    zephyrproject-rtos#3 0x5312a6  (/root/zephyr.exe+0x5312a6)
    zephyrproject-rtos#4 0x52ed7b  (/root/zephyr.exe+0x52ed7b)
    zephyrproject-rtos#5 0x52eddd  (/root/zephyr.exe+0x52eddd)
    zephyrproject-rtos#6 0x7ffff6083c89  (/lib/x86_64-linux-gnu/libc.so.6+0x27c89) (BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)

==5==ABORTING

Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>

cdesjardins pushed a commit to Arch-Embedded/zephyr that referenced this pull request


          Merged in feature/implement_h7_boost_settings (pull request zephyrpro…

2a291f8

…ject-rtos#3)

Feature/implement h7 boost settings

Approved-by: Fabian van den IJssel
Approved-by: Chris Desjardins

swkim101 added a commit to swkim101/zephyr that referenced this pull request


          Bluetooth: userchan: fix buffer overflow in hci_packet_complete()

dc6d054

hci_packet_complete(buf, buf_size) should check whether buf_size is
enough.
For instance, hci_packet_complete can receive buf with buf_size 1,
leading to the buffer overflow in cmd->param_len, which is buf[3].
This can happen when rx_thread() receives two frames in over 512 bytes
and the first frame size is 511. Then, rx_thread() will call
hci_packet_complete() with 1.

==5==ERROR: AddressSanitizer: global-buffer-overflow on address
0x000000ad81c2 at pc 0x0000005279b3 bp 0x7fffe74f5b70 sp 0x7fffe74f5b68

READ of size 2 at 0x000000ad81c2 thread T6
    #0 0x5279b2  (/root/zephyr.exe+0x5279b2)
    zephyrproject-rtos#1 0x4d697d  (/root/zephyr.exe+0x4d697d)
    zephyrproject-rtos#2 0x7ffff60e5daa  (/lib/x86_64-linux-gnu/libc.so.6+0x89daa)
(BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)

0x000000ad81c2 is located 2 bytes to the right of global variable
'rx_thread.frame' defined in 'zephyr/drivers/bluetooth/hci/userchan.c'
(0xad7fc0) of size 512
SUMMARY: AddressSanitizer: global-buffer-overflow
(/root/zephyr.exe+0x5279b2)
Thread T6 created by T2 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x530192  (/root/zephyr.exe+0x530192)
    zephyrproject-rtos#2 0x4dcc22  (/root/zephyr.exe+0x4dcc22)

Thread T2 created by T1 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x530192  (/root/zephyr.exe+0x530192)
    zephyrproject-rtos#2 0x4dcc22  (/root/zephyr.exe+0x4dcc22)

Thread T1 created by T0 here:
    #0 0x48c17c  (/root/zephyr.exe+0x48c17c)
    zephyrproject-rtos#1 0x52f36c  (/root/zephyr.exe+0x52f36c)
    zephyrproject-rtos#2 0x5371dc  (/root/zephyr.exe+0x5371dc)
    zephyrproject-rtos#3 0x5312a6  (/root/zephyr.exe+0x5312a6)
    zephyrproject-rtos#4 0x52ed7b  (/root/zephyr.exe+0x52ed7b)
    zephyrproject-rtos#5 0x52eddd  (/root/zephyr.exe+0x52eddd)
    zephyrproject-rtos#6 0x7ffff6083c89  (/lib/x86_64-linux-gnu/libc.so.6+0x27c89)
(BuildId: 2e01923fea4ad9f7fa50fe24e0f3385a45a6cd1c)

==5==ABORTING

Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet