drivers: replace power/power.h with pm/device.h

Drivers need access to the device PM API, so just include pm/device.h.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>

Author: gmarull

drivers/entropy/entropy_cc13xx_cc26xx.c

@@ -10,7 +10,7 @@
 #include <device.h>
 #include <drivers/entropy.h>
 #include <irq.h>
-#include <power/power.h>
+#include <pm/device.h>
 
 #include <sys/ring_buffer.h>
 #include <sys/sys_io.h>

drivers/gpio/gpio_dw.c

@@ -29,7 +29,7 @@
 #endif
 
 #ifdef CONFIG_PM_DEVICE
-#include <power/power.h>
+#include <pm/device.h>
 #endif
 
 static int gpio_dw_port_set_bits_raw(const struct device *port, uint32_t mask);

drivers/i2c/i2c_cc13xx_cc26xx.c

@@ -8,7 +8,7 @@
 
 #include <kernel.h>
 #include <drivers/i2c.h>
-#include <power/power.h>
+#include <pm/device.h>
 
 #define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
 #include <logging/log.h>

drivers/interrupt_controller/intc_arcv2_irq_unit.c

@@ -24,7 +24,7 @@
 extern void *_VectorTable;
 
 #ifdef CONFIG_PM_DEVICE
-#include <power/power.h>
+#include <pm/device.h>
 #include <kernel_structs.h>
 
 #ifdef CONFIG_ARC_SECURE_FIRMWARE

drivers/interrupt_controller/intc_ioapic.c

@@ -88,7 +88,7 @@ DEVICE_MMIO_TOPLEVEL_STATIC(ioapic_regs, DT_DRV_INST(0));
 static uint32_t ioapic_rtes;
 
 #ifdef CONFIG_PM_DEVICE
-#include <power/power.h>
+#include <pm/device.h>
 
 #define BITS_PER_IRQ  4
 #define IOAPIC_BITFIELD_HI_LO	0

drivers/interrupt_controller/intc_loapic.c

@@ -61,7 +61,7 @@
 #define LOPIC_SSPND_BITS_PER_IRQ  1  /* Just the one for enable disable*/
 #define LOPIC_SUSPEND_BITS_REQD (ROUND_UP((LOAPIC_IRQ_COUNT * LOPIC_SSPND_BITS_PER_IRQ), 32))
 #ifdef CONFIG_PM_DEVICE
-#include <power/power.h>
+#include <pm/device.h>
 uint32_t loapic_suspend_buf[LOPIC_SUSPEND_BITS_REQD / 32] = {0};
 static uint32_t loapic_device_power_state = DEVICE_PM_ACTIVE_STATE;
 #endif

drivers/modem/hl7800.c

@@ -19,7 +19,7 @@ LOG_MODULE_REGISTER(modem_hl7800, CONFIG_MODEM_LOG_LEVEL);
 #include <device.h>
 #include <init.h>
 
-#include <power/power.h>
+#include <pm/device.h>
 #include <drivers/uart.h>
 
 #include <net/net_context.h>

drivers/serial/uart_cc13xx_cc26xx.c

@@ -9,7 +9,7 @@
 #include <device.h>
 #include <errno.h>
 #include <sys/__assert.h>
-#include <power/power.h>
+#include <pm/device.h>
 #include <drivers/uart.h>
 
 #include <driverlib/ioc.h>

drivers/serial/uart_npcx.c

@@ -11,7 +11,7 @@
 #include <drivers/uart.h>
 #include <drivers/clock_control.h>
 #include <kernel.h>
-#include <power/power.h>
+#include <pm/device.h>
 #include <soc.h>
 #include "soc_miwu.h"
 

drivers/spi/spi_cc13xx_cc26xx.c

@@ -11,7 +11,7 @@
 LOG_MODULE_REGISTER(spi_cc13xx_cc26xx);
 
 #include <drivers/spi.h>
-#include <power/power.h>
+#include <pm/device.h>
 
 #include <driverlib/prcm.h>
 #include <driverlib/ssi.h>