Skip to content

Latest commit

 

History

History
25 lines (16 loc) · 878 Bytes

README.md

File metadata and controls

25 lines (16 loc) · 878 Bytes

Testing System for Unmanned Aerial Vehicles

This project aimed to test rpm, force, torque, watt, and voltage of the propellers.

In this project, I have used C language with Arduino IDE to maintain sustainable sensor values and optimize the calculated results. This project has been awarded by the Faculty of Mechanical Engineering at ITU as Best Senior Design Project. I have developed software for the testing system in main.ino

Table of Contents

Installation

Download Arduino IDE, Check your library to make sure you have <LCD5110_Basic.h> and <HX711.h> libraries. If not, upload them to your library.

Requirements

You will need:

  • Arduino Uno
  • HX711 Load Cell Amplifier Board (2x) pins (5,6) and (3,4)
  • LCD5110
  • CNY70 or TCRT5000 (pin 0)

Feel free to reach out for further details.