GondolaStrategyForPoolETH.sol

// Sources flattened with hardhat v2.3.0 https://hardhat.org

// File contracts/lib/SafeMath.sol

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;

// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, errorMessage);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction underflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, errorMessage);

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts with custom message on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}


// File contracts/lib/Context.sol


/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File contracts/lib/Ownable.sol


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// File contracts/lib/Permissioned.sol



abstract contract Permissioned is Ownable {
    using SafeMath for uint;

    uint public numberOfAllowedDepositors;
    mapping(address => bool) public allowedDepositors;

    event AllowDepositor(address indexed account);
    event RemoveDepositor(address indexed account);

    modifier onlyAllowedDeposits() {
        if (numberOfAllowedDepositors > 0) {
            require(allowedDepositors[msg.sender] == true, "Permissioned::onlyAllowedDeposits, not allowed");
        }
        _;
    }

    /**
     * @notice Add an allowed depositor
     * @param depositor address
     */
    function allowDepositor(address depositor) external onlyOwner {
        require(allowedDepositors[depositor] == false, "Permissioned::allowDepositor");
        allowedDepositors[depositor] = true;
        numberOfAllowedDepositors = numberOfAllowedDepositors.add(1);
        emit AllowDepositor(depositor);
    }

    /**
     * @notice Remove an allowed depositor
     * @param depositor address
     */
    function removeDepositor(address depositor) external onlyOwner {
        require(numberOfAllowedDepositors > 0, "Permissioned::removeDepositor, no allowed depositors");
        require(allowedDepositors[depositor] == true, "Permissioned::removeDepositor, not allowed");
        allowedDepositors[depositor] = false;
        numberOfAllowedDepositors = numberOfAllowedDepositors.sub(1);
        emit RemoveDepositor(depositor);
    }
}


// File contracts/interfaces/IERC20.sol


interface IERC20 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
    function transfer(address recipient, uint256 amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 amount) external returns (bool);
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File contracts/YakERC20.sol



abstract contract YakERC20 {
    using SafeMath for uint256;

    string public name = "Yield Yak";
    string public symbol = "YRT";
    uint8 public constant decimals = 18;
    uint256 public totalSupply;
  
    mapping (address => mapping (address => uint256)) internal allowances;
    mapping (address => uint256) internal balances;

    bytes32 public constant DOMAIN_TYPEHASH = 0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f;

    bytes32 public constant VERSION_HASH = 0xc89efdaa54c0f20c7adf612882df0950f5a951637e0307cdcb4c672f298b8bc6;

    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    mapping(address => uint) public nonces;

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);

    constructor() {}

    /**
     * @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
     * @param account The address of the account holding the funds
     * @param spender The address of the account spending the funds
     * @return The number of tokens approved
     */
    function allowance(address account, address spender) external view returns (uint) {
        return allowances[account][spender];
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     * and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * It is recommended to use increaseAllowance and decreaseAllowance instead
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (2^256-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint256 amount) external returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    /**
     * @notice Get the number of tokens held by the `account`
     * @param account The address of the account to get the balance of
     * @return The number of tokens held
     */
    function balanceOf(address account) external view returns (uint) {
        return balances[account];
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint256 amount) external returns (bool) {
        _transferTokens(msg.sender, dst, amount);
        return true;
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool) {
        address spender = msg.sender;
        uint256 spenderAllowance = allowances[src][spender];

        if (spender != src && spenderAllowance != uint256(-1)) {
            uint256 newAllowance = spenderAllowance.sub(amount, "transferFrom: transfer amount exceeds allowance");
            allowances[src][spender] = newAllowance;

            emit Approval(src, spender, newAllowance);
        }

        _transferTokens(src, dst, amount);
        return true;
    }


    /**
     * @notice Approval implementation
     * @param owner The address of the account which owns tokens
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (2^256-1 means infinite)
     */
    function _approve(address owner, address spender, uint256 amount) internal {
        require(owner != address(0), "_approve::owner zero address");
        require(spender != address(0), "_approve::spender zero address");
        allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @notice Transfer implementation
     * @param from The address of the account which owns tokens
     * @param to The address of the account which is receiving tokens
     * @param value The number of tokens that are being transferred
     */
    function _transferTokens(address from, address to, uint256 value) internal {
        require(to != address(0), "_transferTokens: cannot transfer to the zero address");

        balances[from] = balances[from].sub(value, "_transferTokens: transfer exceeds from balance");
        balances[to] = balances[to].add(value);
        emit Transfer(from, to, value);
    }

    function _mint(address to, uint256 value) internal {
        totalSupply = totalSupply.add(value);
        balances[to] = balances[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint256 value) internal {
        balances[from] = balances[from].sub(value, "_burn: burn amount exceeds from balance");
        totalSupply = totalSupply.sub(value, "_burn: burn amount exceeds total supply");
        emit Transfer(from, address(0), value);
    }

    /**
     * @notice Triggers an approval from owner to spender
     * @param owner The address to approve from
     * @param spender The address to be approved
     * @param value The number of tokens that are approved (2^256-1 means infinite)
     * @param deadline The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, "permit::expired");

        bytes32 encodeData = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline));
        _validateSignedData(owner, encodeData, v, r, s);

        _approve(owner, spender, value);
    }

    /**
     * @notice Recovers address from signed data and validates the signature
     * @param signer Address that signed the data
     * @param encodeData Data signed by the address
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function _validateSignedData(address signer, bytes32 encodeData, uint8 v, bytes32 r, bytes32 s) internal view {
        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                getDomainSeparator(),
                encodeData
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        // Explicitly disallow authorizations for address(0) as ecrecover returns address(0) on malformed messages
        require(recoveredAddress != address(0) && recoveredAddress == signer, "Arch::validateSig: invalid signature");
    }

    /**
     * @notice EIP-712 Domain separator
     * @return Separator
     */
    function getDomainSeparator() public view returns (bytes32) {
        return keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name)),
                VERSION_HASH,
                _getChainId(),
                address(this)
            )
        );
    }

    /**
     * @notice Current id of the chain where this contract is deployed
     * @return Chain id
     */
    function _getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }
}


// File contracts/YakStrategy.sol






/**
 * @notice YakStrategy should be inherited by new strategies
 */
abstract contract YakStrategy is YakERC20, Ownable, Permissioned {
    using SafeMath for uint;

    uint public totalDeposits;

    IERC20 public depositToken;
    IERC20 public rewardToken;
    address public devAddr;

    uint public MIN_TOKENS_TO_REINVEST;
    uint public MAX_TOKENS_TO_DEPOSIT_WITHOUT_REINVEST;
    bool public DEPOSITS_ENABLED;

    uint public REINVEST_REWARD_BIPS;
    uint public ADMIN_FEE_BIPS;
    uint public DEV_FEE_BIPS;

    uint constant internal BIPS_DIVISOR = 10000;
    uint constant internal MAX_UINT = uint(-1);

    event Deposit(address indexed account, uint amount);
    event Withdraw(address indexed account, uint amount);
    event Reinvest(uint newTotalDeposits, uint newTotalSupply);
    event Recovered(address token, uint amount);
    event UpdateAdminFee(uint oldValue, uint newValue);
    event UpdateDevFee(uint oldValue, uint newValue);
    event UpdateReinvestReward(uint oldValue, uint newValue);
    event UpdateMinTokensToReinvest(uint oldValue, uint newValue);
    event UpdateMaxTokensToDepositWithoutReinvest(uint oldValue, uint newValue);
    event UpdateDevAddr(address oldValue, address newValue);
    event DepositsEnabled(bool newValue);

    /**
     * @notice Throws if called by smart contract
     */
    modifier onlyEOA() {
        require(tx.origin == msg.sender, "YakStrategy::onlyEOA");
        _;
    }

    /**
     * @notice Approve tokens for use in Strategy
     * @dev Should use modifier `onlyOwner` to avoid griefing
     */
    function setAllowances() public virtual;

    /**
     * @notice Revoke token allowance
     * @param token address
     * @param spender address
     */
    function revokeAllowance(address token, address spender) external onlyOwner {
        require(IERC20(token).approve(spender, 0));
    }

    /**
     * @notice Deposit and deploy deposits tokens to the strategy
     * @dev Must mint receipt tokens to `msg.sender`
     * @param amount deposit tokens
     */
    function deposit(uint amount) external virtual;

    /**
    * @notice Deposit using Permit
    * @dev Should revert for tokens without Permit
    * @param amount Amount of tokens to deposit
    * @param deadline The time at which to expire the signature
    * @param v The recovery byte of the signature
    * @param r Half of the ECDSA signature pair
    * @param s Half of the ECDSA signature pair
    */
    function depositWithPermit(uint amount, uint deadline, uint8 v, bytes32 r, bytes32 s) external virtual;

    /**
     * @notice Deposit on behalf of another account
     * @dev Must mint receipt tokens to `account`
     * @param account address to receive receipt tokens
     * @param amount deposit tokens
     */
    function depositFor(address account, uint amount) external virtual;

    /**
     * @notice Redeem receipt tokens for deposit tokens
     * @param amount receipt tokens
     */
    function withdraw(uint amount) external virtual;

    /**
     * @notice Reinvest reward tokens into deposit tokens
     */
    function reinvest() external virtual;

    /**
     * @notice Estimate reinvest reward
     * @return reward tokens
     */
    function estimateReinvestReward() external view returns (uint) {
        uint unclaimedRewards = checkReward();
        if (unclaimedRewards >= MIN_TOKENS_TO_REINVEST) {
            return unclaimedRewards.mul(REINVEST_REWARD_BIPS).div(BIPS_DIVISOR);
        }
        return 0;
    }

    /**
     * @notice Reward tokens avialable to strategy, including balance
     * @return reward tokens
     */
    function checkReward() public virtual view returns (uint);

    /**
     * @notice Estimated deposit token balance deployed by strategy, excluding balance
     * @return deposit tokens
     */
    function estimateDeployedBalance() external virtual view returns (uint);

    /**
     * @notice Rescue all available deployed deposit tokens back to Strategy
     * @param minReturnAmountAccepted min deposit tokens to receive
     * @param disableDeposits bool
     */
    function rescueDeployedFunds(uint minReturnAmountAccepted, bool disableDeposits) external virtual;

    /**
     * @notice Calculate receipt tokens for a given amount of deposit tokens
     * @dev If contract is empty, use 1:1 ratio
     * @dev Could return zero shares for very low amounts of deposit tokens
     * @param amount deposit tokens
     * @return receipt tokens
     */
    function getSharesForDepositTokens(uint amount) public view returns (uint) {
        if (totalSupply.mul(totalDeposits) == 0) {
            return amount;
        }
        return amount.mul(totalSupply).div(totalDeposits);
    }

    /**
     * @notice Calculate deposit tokens for a given amount of receipt tokens
     * @param amount receipt tokens
     * @return deposit tokens
     */
    function getDepositTokensForShares(uint amount) public view returns (uint) {
        if (totalSupply.mul(totalDeposits) == 0) {
            return 0;
        }
        return amount.mul(totalDeposits).div(totalSupply);
    }

    /**
     * @notice Update reinvest min threshold
     * @param newValue threshold
     */
    function updateMinTokensToReinvest(uint newValue) public onlyOwner {
        emit UpdateMinTokensToReinvest(MIN_TOKENS_TO_REINVEST, newValue);
        MIN_TOKENS_TO_REINVEST = newValue;
    }

    /**
     * @notice Update reinvest max threshold before a deposit
     * @param newValue threshold
     */
    function updateMaxTokensToDepositWithoutReinvest(uint newValue) public onlyOwner {
        emit UpdateMaxTokensToDepositWithoutReinvest(MAX_TOKENS_TO_DEPOSIT_WITHOUT_REINVEST, newValue);
        MAX_TOKENS_TO_DEPOSIT_WITHOUT_REINVEST = newValue;
    }

    /**
     * @notice Update developer fee
     * @param newValue fee in BIPS
     */
    function updateDevFee(uint newValue) public onlyOwner {
        require(newValue.add(ADMIN_FEE_BIPS).add(REINVEST_REWARD_BIPS) <= BIPS_DIVISOR);
        emit UpdateDevFee(DEV_FEE_BIPS, newValue);
        DEV_FEE_BIPS = newValue;
    }

    /**
     * @notice Update admin fee
     * @param newValue fee in BIPS
     */
    function updateAdminFee(uint newValue) public onlyOwner {
        require(newValue.add(DEV_FEE_BIPS).add(REINVEST_REWARD_BIPS) <= BIPS_DIVISOR);
        emit UpdateAdminFee(ADMIN_FEE_BIPS, newValue);
        ADMIN_FEE_BIPS = newValue;
    }

    /**
     * @notice Update reinvest reward
     * @param newValue fee in BIPS
     */
    function updateReinvestReward(uint newValue) public onlyOwner {
        require(newValue.add(ADMIN_FEE_BIPS).add(DEV_FEE_BIPS) <= BIPS_DIVISOR);
        emit UpdateReinvestReward(REINVEST_REWARD_BIPS, newValue);
        REINVEST_REWARD_BIPS = newValue;
    }

    /**
     * @notice Enable/disable deposits
     * @param newValue bool
     */
    function updateDepositsEnabled(bool newValue) public onlyOwner {
        require(DEPOSITS_ENABLED != newValue);
        DEPOSITS_ENABLED = newValue;
        emit DepositsEnabled(newValue);
    }

    /**
     * @notice Update devAddr
     * @param newValue address
     */
    function updateDevAddr(address newValue) public {
        require(msg.sender == devAddr);
        emit UpdateDevAddr(devAddr, newValue);
        devAddr = newValue;
    }

    /**
     * @notice Recover ERC20 from contract
     * @param tokenAddress token address
     * @param tokenAmount amount to recover
     */
    function recoverERC20(address tokenAddress, uint tokenAmount) external onlyOwner {
        require(tokenAmount > 0);
        require(IERC20(tokenAddress).transfer(msg.sender, tokenAmount));
        emit Recovered(tokenAddress, tokenAmount);
    }

    /**
     * @notice Recover AVAX from contract
     * @param amount amount
     */
    function recoverAVAX(uint amount) external onlyOwner {
        require(amount > 0);
        msg.sender.transfer(amount);
        emit Recovered(address(0), amount);
    }
}


// File contracts/interfaces/IGondolaChef.sol


interface IGondolaChef {
    function gondola() external view returns (address);
    function gondolaPerSec() external view returns (uint256);
    function totalAllocPoint() external view returns (uint256);
    function startAt() external view returns (uint256);

    function poolLength() external view returns (uint256);
    function add(uint256 _allocPoint, address _lpToken, bool _withUpdate) external;
    function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) external;
    function getMultiplier(uint256 _from, uint256 _to) external view returns (uint256);
    function pendingGondola(uint256 _pid, address _user) external view returns (uint256);
    function massUpdatePools() external;
    function updatePool(uint256 _pid) external;
    function deposit(uint256 _pid, uint256 _amount) external;
    function withdraw(uint256 _pid, uint256 _amount) external;
    function emergencyWithdraw(uint256 _pid) external;
    function poolInfo(uint pid) external view returns (
        address lpToken,
        uint allocPoint,
        uint lastRewardAt,
        uint accGondolaPerShare
    );
    function userInfo(uint pid, address user) external view returns (
        uint256 amount,
        uint256 rewardDebt
    );
    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
}


// File contracts/interfaces/IRouter.sol


interface IRouter {
    function addLiquidity(address tokenA, address tokenB, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityAVAX(address token, uint amountTokenDesired, uint amountTokenMin, uint amountAVAXMin, address to, uint deadline) external payable returns (uint amountToken, uint amountAVAX, uint liquidity);
    function removeLiquidity(address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline) external returns (uint amountA, uint amountB);
    function removeLiquidityAVAX(address token, uint liquidity, uint amountTokenMin, uint amountAVAXMin, address to, uint deadline) external returns (uint amountToken, uint amountAVAX);
    function removeLiquidityWithPermit(address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s) external returns (uint amountA, uint amountB);
    function removeLiquidityAVAXWithPermit(address token, uint liquidity, uint amountTokenMin, uint amountAVAXMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s) external returns (uint amountToken, uint amountAVAX);
    function removeLiquidityAVAXSupportingFeeOnTransferTokens(address token, uint liquidity, uint amountTokenMin, uint amountAVAXMin, address to, uint deadline) external returns (uint amountAVAX);
    function removeLiquidityAVAXWithPermitSupportingFeeOnTransferTokens(address token, uint liquidity, uint amountTokenMin, uint amountAVAXMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s) external returns (uint amountAVAX);
    function swapExactTokensForTokens(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts);
    function swapExactAVAXForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts);
    function swapTokensForExactAVAX(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts);
    function swapExactTokensForAVAX(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts);
    function swapAVAXForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external;
    function swapExactAVAXForTokensSupportingFeeOnTransferTokens( uint amountOutMin, address[] calldata path, address to, uint deadline) external payable;
    function swapExactTokensForAVAXSupportingFeeOnTransferTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external;
    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] memory path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] memory path) external view returns (uint[] memory amounts);
}


// File contracts/interfaces/IPair.sol


interface IPair is IERC20 {
    function token0() external pure returns (address);
    function token1() external pure returns (address);
}


// File contracts/interfaces/IGondolaPool.sol


interface IGondolaPool {
    function withdrawAdminFees() external;
    function getA() external view returns (uint256);
    function getAPrecise() external view returns (uint256);
    function getToken(uint8 index) external view returns (address);
    function getTokenIndex(address tokenAddress) external view returns (uint8);
    function getDepositTimestamp(address user) external view returns (uint256);
    function getTokenBalance(uint8 index) external view returns (uint256);
    function getVirtualPrice() external view returns (uint256);
    function calculateSwap(uint8 tokenIndexFrom, uint8 tokenIndexTo, uint256 dx) external view returns (uint256);
    function calculateTokenAmount(address account, uint256[] calldata amounts, bool deposit) external view returns (uint256);
    function calculateRemoveLiquidity(address account, uint256 amount) external view returns (uint256[] memory);
    function calculateRemoveLiquidityOneToken(address account, uint256 tokenAmount, uint8 tokenIndex) external view returns (uint256 availableTokenAmount);
    function calculateCurrentWithdrawFee(address user) external view returns (uint256);
    function getAdminBalance(uint256 index) external view returns (uint256);

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);

}


// File contracts/strategies/GondolaStrategyForPoolETH.sol






/**
 * @notice StableSwap strategy for Gondola ETH/zETH
 */
contract GondolaStrategyForPoolETH is YakStrategy {
  using SafeMath for uint;

  IRouter public router;
  IGondolaChef public stakingContract;
  IGondolaPool public poolContract;

  address private constant WAVAX = 0xB31f66AA3C1e785363F0875A1B74E27b85FD66c7;
  address private constant ETH = 0xf20d962a6c8f70c731bd838a3a388D7d48fA6e15;
  address private constant ZETH = 0xf6F3EEa905ac1da6F6DD37d06810C6Fcb0EF5183;
  address private constant ZERO = 0x008E26068B3EB40B443d3Ea88c1fF99B789c10F7;
  IRouter private constant PANGO_ROUTER = IRouter(0xE54Ca86531e17Ef3616d22Ca28b0D458b6C89106);
  IRouter private constant ZERO_ROUTER = IRouter(0x85995d5f8ee9645cA855e92de16FA62D26398060);

  uint public PID;

  constructor(
    string memory _name,
    address _depositToken, 
    address _rewardToken, 
    address _stakingContract,
    address _poolContract,
    address _timelock,
    uint _pid,
    uint _minTokensToReinvest,
    uint _adminFeeBips,
    uint _devFeeBips,
    uint _reinvestRewardBips
  ) {
    name = _name;
    depositToken = IPair(_depositToken);
    rewardToken = IERC20(_rewardToken);
    stakingContract = IGondolaChef(_stakingContract);
    poolContract = IGondolaPool(_poolContract);
    PID = _pid;
    devAddr = msg.sender;

    setAllowances();
    updateMinTokensToReinvest(_minTokensToReinvest);
    updateAdminFee(_adminFeeBips);
    updateDevFee(_devFeeBips);
    updateReinvestReward(_reinvestRewardBips);
    updateDepositsEnabled(true);
    transferOwnership(_timelock);

    emit Reinvest(0, 0);
  }

  /**
   * @notice Approve tokens for use in Strategy
   * @dev Restricted to avoid griefing attacks
   */
  function setAllowances() public override onlyOwner {
    depositToken.approve(address(stakingContract), MAX_UINT);
    rewardToken.approve(address(PANGO_ROUTER), MAX_UINT);
    rewardToken.approve(address(ZERO_ROUTER), MAX_UINT);
    IERC20(ETH).approve(address(poolContract), MAX_UINT);
    IERC20(ZETH).approve(address(poolContract), MAX_UINT);
  }

  /**
   * @notice Deposit tokens to receive receipt tokens
   * @param amount Amount of tokens to deposit
   */
  function deposit(uint amount) external override {
    _deposit(msg.sender, amount);
  }

  /**
   * @notice Deposit using Permit
   * @param amount Amount of tokens to deposit
   * @param deadline The time at which to expire the signature
   * @param v The recovery byte of the signature
   * @param r Half of the ECDSA signature pair
   * @param s Half of the ECDSA signature pair
   */
  function depositWithPermit(uint amount, uint deadline, uint8 v, bytes32 r, bytes32 s) external override {
    depositToken.permit(msg.sender, address(this), amount, deadline, v, r, s);
    _deposit(msg.sender, amount);
  }

  function depositFor(address account, uint amount) external override {
      _deposit(account, amount);
  }

  function _deposit(address account, uint amount) internal {
    require(DEPOSITS_ENABLED == true, "GondolaStrategyForStableSwap::_deposit");
    if (MAX_TOKENS_TO_DEPOSIT_WITHOUT_REINVEST > 0) {
        uint unclaimedRewards = checkReward();
        if (unclaimedRewards > MAX_TOKENS_TO_DEPOSIT_WITHOUT_REINVEST) {
            _reinvest(unclaimedRewards);
        }
    }
    require(depositToken.transferFrom(msg.sender, address(this), amount));
    _stakeDepositTokens(amount);
    _mint(account, getSharesForDepositTokens(amount));
    totalDeposits = totalDeposits.add(amount);
    emit Deposit(account, amount);
  }

  function withdraw(uint amount) external override {
    uint depositTokenAmount = getDepositTokensForShares(amount);
    if (depositTokenAmount > 0) {
      _withdrawDepositTokens(depositTokenAmount);
      require(depositToken.transfer(msg.sender, depositTokenAmount), "GondolaStrategyForStableSwap::withdraw");
      _burn(msg.sender, amount);
      totalDeposits = totalDeposits.sub(depositTokenAmount);
      emit Withdraw(msg.sender, depositTokenAmount);
    }
  }

  function _withdrawDepositTokens(uint amount) private {
    require(amount > 0, "GondolaStrategyForStableSwap::_withdrawDepositTokens");
    stakingContract.withdraw(PID, amount);
  }

  function reinvest() external override onlyEOA {
    uint unclaimedRewards = checkReward();
    require(unclaimedRewards >= MIN_TOKENS_TO_REINVEST, "GondolaStrategyForStableSwap::reinvest");
    _reinvest(unclaimedRewards);
  }

  /**
    * @notice Reinvest rewards from staking contract to deposit tokens
    * @dev Reverts if the expected amount of tokens are not returned from `stakingContract`
    * @param amount deposit tokens to reinvest
    */
  function _reinvest(uint amount) private {
    stakingContract.deposit(PID, 0);

    uint devFee = amount.mul(DEV_FEE_BIPS).div(BIPS_DIVISOR);
    if (devFee > 0) {
      require(rewardToken.transfer(devAddr, devFee), "GondolaStrategyForStableSwap::_reinvest, dev");
    }

    uint adminFee = amount.mul(ADMIN_FEE_BIPS).div(BIPS_DIVISOR);
    if (adminFee > 0) {
      require(rewardToken.transfer(owner(), adminFee), "GondolaStrategyForStableSwap::_reinvest, admin");
    }

    uint reinvestFee = amount.mul(REINVEST_REWARD_BIPS).div(BIPS_DIVISOR);
    if (reinvestFee > 0) {
      require(rewardToken.transfer(msg.sender, reinvestFee), "GondolaStrategyForStableSwap::_reinvest, reward");
    }

    uint depositTokenAmount = _convertRewardTokensToDepositTokens(
      amount.sub(devFee).sub(adminFee).sub(reinvestFee)
    );

    _stakeDepositTokens(depositTokenAmount);
    totalDeposits = totalDeposits.add(depositTokenAmount);

    emit Reinvest(totalDeposits, totalSupply);
  }
    
  function _stakeDepositTokens(uint amount) private {
    require(amount > 0, "GondolaStrategyForStableSwap::_stakeDepositTokens");
    stakingContract.deposit(PID, amount);
  }

  function checkReward() public override view returns (uint) {
    uint pendingReward = stakingContract.pendingGondola(PID, address(this));
    uint contractBalance = rewardToken.balanceOf(address(this));
    return pendingReward.add(contractBalance);
  }

  /**
    * @notice Converts reward tokens to deposit tokens
    * @dev Always converts through router; there are no price checks enabled
    * @return deposit tokens received
    */
  function _convertRewardTokensToDepositTokens(uint amount) private returns (uint) {
    require(amount > 0, "GondolaStrategyForStableSwap::_convertRewardTokensToDepositTokens");

    IRouter _router;
    uint[] memory liquidityAmounts = new uint[](2);
    address[] memory path = new address[](3);
    path[0] = address(rewardToken);

    // find route for bonus token
    if (poolContract.getTokenBalance(0) < poolContract.getTokenBalance(1)) {
      // convert to 0
      path[1] = WAVAX;
      path[2] = ETH;
      _router = PANGO_ROUTER;
      uint[] memory amountsOutToken = _router.getAmountsOut(amount, path);
      uint amountOutToken = amountsOutToken[amountsOutToken.length - 1];
      _router.swapExactTokensForTokens(amount, amountOutToken, path, address(this), block.timestamp);
      liquidityAmounts[0] = amountOutToken;
    }
    else {
      // convert to 1
      path[1] = ZERO;
      path[2] = ZETH;
      _router = ZERO_ROUTER;
      uint[] memory amountsOutToken = _router.getAmountsOut(amount, path);
      uint amountOutToken = amountsOutToken[amountsOutToken.length - 1];
      _router.swapExactTokensForTokens(amount, amountOutToken, path, address(this), block.timestamp);
      liquidityAmounts[1] = amountOutToken;
    }

    uint liquidity = poolContract.addLiquidity(liquidityAmounts, 0, block.timestamp);
    return liquidity;
  }

  /**
   * @notice Estimate recoverable balance
   * @return deposit tokens
   */
  function estimateDeployedBalance() external override view returns (uint) {
    (uint depositBalance, ) = stakingContract.userInfo(PID, address(this));
    return depositBalance;
  }

  function rescueDeployedFunds(uint minReturnAmountAccepted, bool disableDeposits) external override onlyOwner {
    uint balanceBefore = depositToken.balanceOf(address(this));
    stakingContract.emergencyWithdraw(PID);
    uint balanceAfter = depositToken.balanceOf(address(this));
    require(balanceAfter.sub(balanceBefore) >= minReturnAmountAccepted, "GondolaStrategyForStableSwap::rescueDeployedFunds");
    totalDeposits = balanceAfter;
    emit Reinvest(totalDeposits, totalSupply);
    if (DEPOSITS_ENABLED == true && disableDeposits == true) {
      updateDepositsEnabled(false);
    }
  }
}