ui.json

# -*- Mode: Python -*-
#

##
# = Remote desktop
##

{ 'include': 'sockets.json' }

##
# @set_password:
#
# Sets the password of a remote display session.
#
# @protocol: `vnc' to modify the VNC server password
#            `spice' to modify the Spice server password
#
# @password: the new password
#
# @connected: how to handle existing clients when changing the
#                       password.  If nothing is specified, defaults to `keep'
#                       `fail' to fail the command if clients are connected
#                       `disconnect' to disconnect existing clients
#                       `keep' to maintain existing clients
#
# Returns: Nothing on success
#          If Spice is not enabled, DeviceNotFound
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "set_password", "arguments": { "protocol": "vnc",
#                                                "password": "secret" } }
# <- { "return": {} }
#
##
{ 'command': 'set_password',
  'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }

##
# @expire_password:
#
# Expire the password of a remote display server.
#
# @protocol: the name of the remote display protocol `vnc' or `spice'
#
# @time: when to expire the password.
#        `now' to expire the password immediately
#        `never' to cancel password expiration
#        `+INT' where INT is the number of seconds from now (integer)
#        `INT' where INT is the absolute time in seconds
#
# Returns: Nothing on success
#          If @protocol is `spice' and Spice is not active, DeviceNotFound
#
# Since: 0.14.0
#
# Notes: Time is relative to the server and currently there is no way to
#        coordinate server time with client time.  It is not recommended to
#        use the absolute time version of the @time parameter unless you're
#        sure you are on the same machine as the QEMU instance.
#
# Example:
#
# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
#                                                   "time": "+60" } }
# <- { "return": {} }
#
##
{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }

##
# @screendump:
#
# Write a PPM of the VGA screen to a file.
#
# @filename: the path of a new PPM file to store the image
#
# @device: ID of the display device that should be dumped. If this parameter
#          is missing, the primary display will be used. (Since 2.12)
#
# @head: head to use in case the device supports multiple heads. If this
#        parameter is missing, head #0 will be used. Also note that the head
#        can only be specified in conjunction with the device ID. (Since 2.12)
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "screendump",
#      "arguments": { "filename": "/tmp/image" } }
# <- { "return": {} }
#
##
{ 'command': 'screendump',
  'data': {'filename': 'str', '*device': 'str', '*head': 'int'} }

##
# == Spice
##

##
# @SpiceBasicInfo:
#
# The basic information for SPICE network connection
#
# @host: IP address
#
# @port: port number
#
# @family: address family
#
# Since: 2.1
##
{ 'struct': 'SpiceBasicInfo',
  'data': { 'host': 'str',
            'port': 'str',
            'family': 'NetworkAddressFamily' },
  'if': 'defined(CONFIG_SPICE)' }

##
# @SpiceServerInfo:
#
# Information about a SPICE server
#
# @auth: authentication method
#
# Since: 2.1
##
{ 'struct': 'SpiceServerInfo',
  'base': 'SpiceBasicInfo',
  'data': { '*auth': 'str' },
  'if': 'defined(CONFIG_SPICE)' }

##
# @SpiceChannel:
#
# Information about a SPICE client channel.
#
# @connection-id: SPICE connection id number.  All channels with the same id
#                 belong to the same SPICE session.
#
# @channel-type: SPICE channel type number.  "1" is the main control
#                channel, filter for this one if you want to track spice
#                sessions only
#
# @channel-id: SPICE channel ID number.  Usually "0", might be different when
#              multiple channels of the same type exist, such as multiple
#              display channels in a multihead setup
#
# @tls: true if the channel is encrypted, false otherwise.
#
# Since: 0.14.0
##
{ 'struct': 'SpiceChannel',
  'base': 'SpiceBasicInfo',
  'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
           'tls': 'bool'},
  'if': 'defined(CONFIG_SPICE)' }

##
# @SpiceQueryMouseMode:
#
# An enumeration of Spice mouse states.
#
# @client: Mouse cursor position is determined by the client.
#
# @server: Mouse cursor position is determined by the server.
#
# @unknown: No information is available about mouse mode used by
#           the spice server.
#
# Note: spice/enums.h has a SpiceMouseMode already, hence the name.
#
# Since: 1.1
##
{ 'enum': 'SpiceQueryMouseMode',
  'data': [ 'client', 'server', 'unknown' ],
  'if': 'defined(CONFIG_SPICE)' }

##
# @SpiceInfo:
#
# Information about the SPICE session.
#
# @enabled: true if the SPICE server is enabled, false otherwise
#
# @migrated: true if the last guest migration completed and spice
#            migration had completed as well. false otherwise. (since 1.4)
#
# @host: The hostname the SPICE server is bound to.  This depends on
#        the name resolution on the host and may be an IP address.
#
# @port: The SPICE server's port number.
#
# @compiled-version: SPICE server version.
#
# @tls-port: The SPICE server's TLS port number.
#
# @auth: the current authentication type used by the server
#        'none'  if no authentication is being used
#        'spice' uses SASL or direct TLS authentication, depending on command
#                line options
#
# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
#              be determined by the client or the server, or unknown if spice
#              server doesn't provide this information. (since: 1.1)
#
# @channels: a list of @SpiceChannel for each active spice channel
#
# Since: 0.14.0
##
{ 'struct': 'SpiceInfo',
  'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
           '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
           'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
  'if': 'defined(CONFIG_SPICE)' }

##
# @query-spice:
#
# Returns information about the current SPICE server
#
# Returns: @SpiceInfo
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "query-spice" }
# <- { "return": {
#          "enabled": true,
#          "auth": "spice",
#          "port": 5920,
#          "tls-port": 5921,
#          "host": "0.0.0.0",
#          "channels": [
#             {
#                "port": "54924",
#                "family": "ipv4",
#                "channel-type": 1,
#                "connection-id": 1804289383,
#                "host": "127.0.0.1",
#                "channel-id": 0,
#                "tls": true
#             },
#             {
#                "port": "36710",
#                "family": "ipv4",
#                "channel-type": 4,
#                "connection-id": 1804289383,
#                "host": "127.0.0.1",
#                "channel-id": 0,
#                "tls": false
#             },
#             [ ... more channels follow ... ]
#          ]
#       }
#    }
#
##
{ 'command': 'query-spice', 'returns': 'SpiceInfo',
  'if': 'defined(CONFIG_SPICE)' }

##
# @SPICE_CONNECTED:
#
# Emitted when a SPICE client establishes a connection
#
# @server: server information
#
# @client: client information
#
# Since: 0.14.0
#
# Example:
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
#      "event": "SPICE_CONNECTED",
#      "data": {
#        "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
#        "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
#    }}
#
##
{ 'event': 'SPICE_CONNECTED',
  'data': { 'server': 'SpiceBasicInfo',
            'client': 'SpiceBasicInfo' },
  'if': 'defined(CONFIG_SPICE)' }

##
# @SPICE_INITIALIZED:
#
# Emitted after initial handshake and authentication takes place (if any)
# and the SPICE channel is up and running
#
# @server: server information
#
# @client: client information
#
# Since: 0.14.0
#
# Example:
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
#      "event": "SPICE_INITIALIZED",
#      "data": {"server": {"auth": "spice", "port": "5921",
#                          "family": "ipv4", "host": "127.0.0.1"},
#               "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
#                          "connection-id": 1804289383, "host": "127.0.0.1",
#                          "channel-id": 0, "tls": true}
#    }}
#
##
{ 'event': 'SPICE_INITIALIZED',
  'data': { 'server': 'SpiceServerInfo',
            'client': 'SpiceChannel' },
  'if': 'defined(CONFIG_SPICE)' }

##
# @SPICE_DISCONNECTED:
#
# Emitted when the SPICE connection is closed
#
# @server: server information
#
# @client: client information
#
# Since: 0.14.0
#
# Example:
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
#      "event": "SPICE_DISCONNECTED",
#      "data": {
#        "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
#        "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
#    }}
#
##
{ 'event': 'SPICE_DISCONNECTED',
  'data': { 'server': 'SpiceBasicInfo',
            'client': 'SpiceBasicInfo' },
  'if': 'defined(CONFIG_SPICE)' }

##
# @SPICE_MIGRATE_COMPLETED:
#
# Emitted when SPICE migration has completed
#
# Since: 1.3
#
# Example:
#
# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
#      "event": "SPICE_MIGRATE_COMPLETED" }
#
##
{ 'event': 'SPICE_MIGRATE_COMPLETED',
  'if': 'defined(CONFIG_SPICE)' }

##
# == VNC
##

##
# @VncBasicInfo:
#
# The basic information for vnc network connection
#
# @host: IP address
#
# @service: The service name of the vnc port. This may depend on the host
#           system's service database so symbolic names should not be relied
#           on.
#
# @family: address family
#
# @websocket: true in case the socket is a websocket (since 2.3).
#
# Since: 2.1
##
{ 'struct': 'VncBasicInfo',
  'data': { 'host': 'str',
            'service': 'str',
            'family': 'NetworkAddressFamily',
            'websocket': 'bool' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VncServerInfo:
#
# The network connection information for server
#
# @auth: authentication method used for
#        the plain (non-websocket) VNC server
#
# Since: 2.1
##
{ 'struct': 'VncServerInfo',
  'base': 'VncBasicInfo',
  'data': { '*auth': 'str' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VncClientInfo:
#
# Information about a connected VNC client.
#
# @x509_dname: If x509 authentication is in use, the Distinguished
#              Name of the client.
#
# @sasl_username: If SASL authentication is in use, the SASL username
#                 used for authentication.
#
# Since: 0.14.0
##
{ 'struct': 'VncClientInfo',
  'base': 'VncBasicInfo',
  'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VncInfo:
#
# Information about the VNC session.
#
# @enabled: true if the VNC server is enabled, false otherwise
#
# @host: The hostname the VNC server is bound to.  This depends on
#        the name resolution on the host and may be an IP address.
#
# @family: 'ipv6' if the host is listening for IPv6 connections
#                    'ipv4' if the host is listening for IPv4 connections
#                    'unix' if the host is listening on a unix domain socket
#                    'unknown' otherwise
#
# @service: The service name of the server's port.  This may depends
#           on the host system's service database so symbolic names should not
#           be relied on.
#
# @auth: the current authentication type used by the server
#        'none' if no authentication is being used
#        'vnc' if VNC authentication is being used
#        'vencrypt+plain' if VEncrypt is used with plain text authentication
#        'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
#        'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
#        'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
#        'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
#        'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
#        'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
#        'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
#        'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
#
# @clients: a list of @VncClientInfo of all currently connected clients
#
# Since: 0.14.0
##
{ 'struct': 'VncInfo',
  'data': {'enabled': 'bool', '*host': 'str',
           '*family': 'NetworkAddressFamily',
           '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
  'if': 'defined(CONFIG_VNC)' }

##
# @VncPrimaryAuth:
#
# vnc primary authentication method.
#
# Since: 2.3
##
{ 'enum': 'VncPrimaryAuth',
  'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
            'tls', 'vencrypt', 'sasl' ],
  'if': 'defined(CONFIG_VNC)' }

##
# @VncVencryptSubAuth:
#
# vnc sub authentication method with vencrypt.
#
# Since: 2.3
##
{ 'enum': 'VncVencryptSubAuth',
  'data': [ 'plain',
            'tls-none',  'x509-none',
            'tls-vnc',   'x509-vnc',
            'tls-plain', 'x509-plain',
            'tls-sasl',  'x509-sasl' ],
  'if': 'defined(CONFIG_VNC)' }

##
# @VncServerInfo2:
#
# The network connection information for server
#
# @auth: The current authentication type used by the servers
#
# @vencrypt: The vencrypt sub authentication type used by the
#            servers, only specified in case auth == vencrypt.
#
# Since: 2.9
##
{ 'struct': 'VncServerInfo2',
  'base': 'VncBasicInfo',
  'data': { 'auth'      : 'VncPrimaryAuth',
            '*vencrypt' : 'VncVencryptSubAuth' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VncInfo2:
#
# Information about a vnc server
#
# @id: vnc server name.
#
# @server: A list of @VncBasincInfo describing all listening sockets.
#          The list can be empty (in case the vnc server is disabled).
#          It also may have multiple entries: normal + websocket,
#          possibly also ipv4 + ipv6 in the future.
#
# @clients: A list of @VncClientInfo of all currently connected clients.
#           The list can be empty, for obvious reasons.
#
# @auth: The current authentication type used by the non-websockets servers
#
# @vencrypt: The vencrypt authentication type used by the servers,
#            only specified in case auth == vencrypt.
#
# @display: The display device the vnc server is linked to.
#
# Since: 2.3
##
{ 'struct': 'VncInfo2',
  'data': { 'id'        : 'str',
            'server'    : ['VncServerInfo2'],
            'clients'   : ['VncClientInfo'],
            'auth'      : 'VncPrimaryAuth',
            '*vencrypt' : 'VncVencryptSubAuth',
            '*display'  : 'str' },
  'if': 'defined(CONFIG_VNC)' }

##
# @query-vnc:
#
# Returns information about the current VNC server
#
# Returns: @VncInfo
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "query-vnc" }
# <- { "return": {
#          "enabled":true,
#          "host":"0.0.0.0",
#          "service":"50402",
#          "auth":"vnc",
#          "family":"ipv4",
#          "clients":[
#             {
#                "host":"127.0.0.1",
#                "service":"50401",
#                "family":"ipv4"
#             }
#          ]
#       }
#    }
#
##
{ 'command': 'query-vnc', 'returns': 'VncInfo',
  'if': 'defined(CONFIG_VNC)' }
##
# @query-vnc-servers:
#
# Returns a list of vnc servers.  The list can be empty.
#
# Returns: a list of @VncInfo2
#
# Since: 2.3
##
{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
  'if': 'defined(CONFIG_VNC)' }

##
# @change-vnc-password:
#
# Change the VNC server password.
#
# @password:  the new password to use with VNC authentication
#
# Since: 1.1
#
# Notes:  An empty password in this command will set the password to the empty
#         string.  Existing clients are unaffected by executing this command.
##
{ 'command': 'change-vnc-password',
  'data': { 'password': 'str' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VNC_CONNECTED:
#
# Emitted when a VNC client establishes a connection
#
# @server: server information
#
# @client: client information
#
# Note: This event is emitted before any authentication takes place, thus
# the authentication ID is not provided
#
# Since: 0.13.0
#
# Example:
#
# <- { "event": "VNC_CONNECTED",
#      "data": {
#            "server": { "auth": "sasl", "family": "ipv4",
#                        "service": "5901", "host": "0.0.0.0" },
#            "client": { "family": "ipv4", "service": "58425",
#                        "host": "127.0.0.1" } },
#      "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
#
##
{ 'event': 'VNC_CONNECTED',
  'data': { 'server': 'VncServerInfo',
            'client': 'VncBasicInfo' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VNC_INITIALIZED:
#
# Emitted after authentication takes place (if any) and the VNC session is
# made active
#
# @server: server information
#
# @client: client information
#
# Since: 0.13.0
#
# Example:
#
# <-  { "event": "VNC_INITIALIZED",
#       "data": {
#            "server": { "auth": "sasl", "family": "ipv4",
#                        "service": "5901", "host": "0.0.0.0"},
#            "client": { "family": "ipv4", "service": "46089",
#                        "host": "127.0.0.1", "sasl_username": "luiz" } },
#       "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
#
##
{ 'event': 'VNC_INITIALIZED',
  'data': { 'server': 'VncServerInfo',
            'client': 'VncClientInfo' },
  'if': 'defined(CONFIG_VNC)' }

##
# @VNC_DISCONNECTED:
#
# Emitted when the connection is closed
#
# @server: server information
#
# @client: client information
#
# Since: 0.13.0
#
# Example:
#
# <- { "event": "VNC_DISCONNECTED",
#      "data": {
#            "server": { "auth": "sasl", "family": "ipv4",
#                        "service": "5901", "host": "0.0.0.0" },
#            "client": { "family": "ipv4", "service": "58425",
#                        "host": "127.0.0.1", "sasl_username": "luiz" } },
#      "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
#
##
{ 'event': 'VNC_DISCONNECTED',
  'data': { 'server': 'VncServerInfo',
            'client': 'VncClientInfo' },
  'if': 'defined(CONFIG_VNC)' }

##
# = Input
##

##
# @MouseInfo:
#
# Information about a mouse device.
#
# @name: the name of the mouse device
#
# @index: the index of the mouse device
#
# @current: true if this device is currently receiving mouse events
#
# @absolute: true if this device supports absolute coordinates as input
#
# Since: 0.14.0
##
{ 'struct': 'MouseInfo',
  'data': {'name': 'str', 'index': 'int', 'current': 'bool',
           'absolute': 'bool'} }

##
# @query-mice:
#
# Returns information about each active mouse device
#
# Returns: a list of @MouseInfo for each device
#
# Since: 0.14.0
#
# Example:
#
# -> { "execute": "query-mice" }
# <- { "return": [
#          {
#             "name":"QEMU Microsoft Mouse",
#             "index":0,
#             "current":false,
#             "absolute":false
#          },
#          {
#             "name":"QEMU PS/2 Mouse",
#             "index":1,
#             "current":true,
#             "absolute":true
#          }
#       ]
#    }
#
##
{ 'command': 'query-mice', 'returns': ['MouseInfo'] }

##
# @QKeyCode:
#
# An enumeration of key name.
#
# This is used by the @send-key command.
#
# @unmapped: since 2.0
# @pause: since 2.0
# @ro: since 2.4
# @kp_comma: since 2.4
# @kp_equals: since 2.6
# @power: since 2.6
# @hiragana: since 2.9
# @henkan: since 2.9
# @yen: since 2.9
#
# @sleep: since 2.10
# @wake: since 2.10
# @audionext: since 2.10
# @audioprev: since 2.10
# @audiostop: since 2.10
# @audioplay: since 2.10
# @audiomute: since 2.10
# @volumeup: since 2.10
# @volumedown: since 2.10
# @mediaselect: since 2.10
# @mail: since 2.10
# @calculator: since 2.10
# @computer: since 2.10
# @ac_home: since 2.10
# @ac_back: since 2.10
# @ac_forward: since 2.10
# @ac_refresh: since 2.10
# @ac_bookmarks: since 2.10
# altgr, altgr_r: dropped in 2.10
#
# @muhenkan: since 2.12
# @katakanahiragana: since 2.12
#
# 'sysrq' was mistakenly added to hack around the fact that
# the ps2 driver was not generating correct scancodes sequences
# when 'alt+print' was pressed. This flaw is now fixed and the
# 'sysrq' key serves no further purpose. Any further use of
# 'sysrq' will be transparently changed to 'print', so they
# are effectively synonyms.
#
# Since: 1.3.0
#
##
{ 'enum': 'QKeyCode',
  'data': [ 'unmapped',
            'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
            'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
            '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
            'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
            'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
            'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
            'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
            'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
            'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
            'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
            'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
            'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
            'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
            'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
            'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
            'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
            'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
            'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
            'volumeup', 'volumedown', 'mediaselect',
            'mail', 'calculator', 'computer',
            'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] }

##
# @KeyValue:
#
# Represents a keyboard key.
#
# Since: 1.3.0
##
{ 'union': 'KeyValue',
  'data': {
    'number': 'int',
    'qcode': 'QKeyCode' } }

##
# @send-key:
#
# Send keys to guest.
#
# @keys: An array of @KeyValue elements. All @KeyValues in this array are
#        simultaneously sent to the guest. A @KeyValue.number value is sent
#        directly to the guest, while @KeyValue.qcode must be a valid
#        @QKeyCode value
#
# @hold-time: time to delay key up events, milliseconds. Defaults
#             to 100
#
# Returns: Nothing on success
#          If key is unknown or redundant, InvalidParameter
#
# Since: 1.3.0
#
# Example:
#
# -> { "execute": "send-key",
#      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
#                               { "type": "qcode", "data": "alt" },
#                               { "type": "qcode", "data": "delete" } ] } }
# <- { "return": {} }
#
##
{ 'command': 'send-key',
  'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }

##
# @InputButton:
#
# Button of a pointer input device (mouse, tablet).
#
# @side: front side button of a 5-button mouse (since 2.9)
#
# @extra: rear side button of a 5-button mouse (since 2.9)
#
# Since: 2.0
##
{ 'enum'  : 'InputButton',
  'data'  : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
  'extra' ] }

##
# @InputAxis:
#
# Position axis of a pointer input device (mouse, tablet).
#
# Since: 2.0
##
{ 'enum'  : 'InputAxis',
  'data'  : [ 'x', 'y' ] }

##
# @InputKeyEvent:
#
# Keyboard input event.
#
# @key:    Which key this event is for.
# @down:   True for key-down and false for key-up events.
#
# Since: 2.0
##
{ 'struct'  : 'InputKeyEvent',
  'data'  : { 'key'     : 'KeyValue',
              'down'    : 'bool' } }

##
# @InputBtnEvent:
#
# Pointer button input event.
#
# @button: Which button this event is for.
# @down:   True for key-down and false for key-up events.
#
# Since: 2.0
##
{ 'struct'  : 'InputBtnEvent',
  'data'  : { 'button'  : 'InputButton',
              'down'    : 'bool' } }

##
# @InputMoveEvent:
#
# Pointer motion input event.
#
# @axis:   Which axis is referenced by @value.
# @value:  Pointer position.  For absolute coordinates the
#          valid range is 0 -> 0x7ffff
#
# Since: 2.0
##
{ 'struct'  : 'InputMoveEvent',
  'data'  : { 'axis'    : 'InputAxis',
              'value'   : 'int' } }

##
# @InputEvent:
#
# Input event union.
#
# @type: the input type, one of:
#  - 'key': Input event of Keyboard
#  - 'btn': Input event of pointer buttons
#  - 'rel': Input event of relative pointer motion
#  - 'abs': Input event of absolute pointer motion
#
# Since: 2.0
##
{ 'union' : 'InputEvent',
  'data'  : { 'key'     : 'InputKeyEvent',
              'btn'     : 'InputBtnEvent',
              'rel'     : 'InputMoveEvent',
              'abs'     : 'InputMoveEvent' } }

##
# @input-send-event:
#
# Send input event(s) to guest.
#
# @device: display device to send event(s) to.
# @head: head to send event(s) to, in case the
#        display device supports multiple scanouts.
# @events: List of InputEvent union.
#
# Returns: Nothing on success.
#
# The @device and @head parameters can be used to send the input event
# to specific input devices in case (a) multiple input devices of the
# same kind are added to the virtual machine and (b) you have
# configured input routing (see docs/multiseat.txt) for those input
# devices.  The parameters work exactly like the device and head
# properties of input devices.  If @device is missing, only devices
# that have no input routing config are admissible.  If @device is
# specified, both input devices with and without input routing config
# are admissible, but devices with input routing config take
# precedence.
#
# Since: 2.6
#
# Note: The consoles are visible in the qom tree, under
# /backend/console[$index]. They have a device link and head property,
# so it is possible to map which console belongs to which device and
# display.
#
# Example:
#
# 1. Press left mouse button.
#
# -> { "execute": "input-send-event",
#     "arguments": { "device": "video0",
#                    "events": [ { "type": "btn",
#                    "data" : { "down": true, "button": "left" } } ] } }
# <- { "return": {} }
#
# -> { "execute": "input-send-event",
#     "arguments": { "device": "video0",
#                    "events": [ { "type": "btn",
#                    "data" : { "down": false, "button": "left" } } ] } }
# <- { "return": {} }
#
# 2. Press ctrl-alt-del.
#
# -> { "execute": "input-send-event",
#      "arguments": { "events": [
#         { "type": "key", "data" : { "down": true,
#           "key": {"type": "qcode", "data": "ctrl" } } },
#         { "type": "key", "data" : { "down": true,
#           "key": {"type": "qcode", "data": "alt" } } },
#         { "type": "key", "data" : { "down": true,
#           "key": {"type": "qcode", "data": "delete" } } } ] } }
# <- { "return": {} }
#
# 3. Move mouse pointer to absolute coordinates (20000, 400).
#
# -> { "execute": "input-send-event" ,
#   "arguments": { "events": [
#                { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
#                { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
# <- { "return": {} }
#
##
{ 'command': 'input-send-event',
  'data': { '*device': 'str',
            '*head'  : 'int',
            'events' : [ 'InputEvent' ] } }

##
# @GrabToggleKeys:
#
# Keys to toggle input-linux between host and guest.
#
# Since: 4.0
#
##
{ 'enum': 'GrabToggleKeys',
  'data': [ 'ctrl-ctrl', 'alt-alt', 'meta-meta', 'scrolllock', 'ctrl-scrolllock' ] }

##
# @DisplayGTK:
#
# GTK display options.
#
# @grab-on-hover: Grab keyboard input on mouse hover.
# @zoom-to-fit: Zoom guest display to fit into the host window.  When
#               turned off the host window will be resized instead.
#               In case the display device can notify the guest on
#               window resizes (virtio-gpu) this will default to "on",
#               assuming the guest will resize the display to match
#               the window size then.  Otherwise it defaults to "off".
#               Since 3.1
#
# Since: 2.12
#
##
{ 'struct'  : 'DisplayGTK',
  'data'    : { '*grab-on-hover' : 'bool',
                '*zoom-to-fit'   : 'bool'  } }

##
# @DisplayEGLHeadless:
#
# EGL headless display options.
#
# @rendernode: Which DRM render node should be used. Default is the first
#              available node on the host.
#
# Since: 3.1
#
##
{ 'struct'  : 'DisplayEGLHeadless',
  'data'    : { '*rendernode' : 'str' } }

 ##
 # @DisplayGLMode:
 #
 # Display OpenGL mode.
 #
 # @off: Disable OpenGL (default).
 # @on: Use OpenGL, pick context type automatically.
 #      Would better be named 'auto' but is called 'on' for backward
 #      compatibility with bool type.
 # @core: Use OpenGL with Core (desktop) Context.
 # @es: Use OpenGL with ES (embedded systems) Context.
 #
 # Since: 3.0
 #
 ##
 { 'enum'    : 'DisplayGLMode',
   'data'    : [ 'off', 'on', 'core', 'es' ] }

##
# @DisplayType:
#
# Display (user interface) type.
#
# @default: The default user interface, selecting from the first available
#           of gtk, sdl, cocoa, and vnc.
#
# @none: No user interface or video output display. The guest will
#        still see an emulated graphics card, but its output will not
#        be displayed to the QEMU user.
#
# @gtk: The GTK user interface.
#
# @sdl: The SDL user interface.
#
# @egl-headless: No user interface, offload GL operations to a local
#                DRI device. Graphical display need to be paired with
#                VNC or Spice. (Since 3.1)
#
# @curses: Display video output via curses.  For graphics device
#          models which support a text mode, QEMU can display this
#          output using a curses/ncurses interface. Nothing is
#          displayed when the graphics device is in graphical mode or
#          if the graphics device does not support a text
#          mode. Generally only the VGA device models support text
#          mode.
#
# @cocoa: The Cocoa user interface.
#
# @spice-app: Set up a Spice server and run the default associated
#             application to connect to it. The server will redirect
#             the serial console and QEMU monitors. (Since 4.0)
#
# Since: 2.12
#
##
{ 'enum'    : 'DisplayType',
  'data'    : [ 'default', 'none', 'gtk', 'sdl',
                'egl-headless', 'curses', 'cocoa',
                'spice-app'] }

##
# @DisplayOptions:
#
# Display (user interface) options.
#
# @type:          Which DisplayType qemu should use.
# @full-screen:   Start user interface in fullscreen mode (default: off).
# @window-close:  Allow to quit qemu with window close button (default: on).
# @gl:            Enable OpenGL support (default: off).
#
# Since: 2.12
#
##
{ 'union'   : 'DisplayOptions',
  'base'    : { 'type'           : 'DisplayType',
                '*full-screen'   : 'bool',
                '*window-close'  : 'bool',
                '*gl'            : 'DisplayGLMode' },
  'discriminator' : 'type',
  'data'    : { 'gtk'            : 'DisplayGTK',
                'egl-headless'   : 'DisplayEGLHeadless'} }

##
# @query-display-options:
#
# Returns information about display configuration
#
# Returns: @DisplayOptions
#
# Since: 3.1
#
##
{ 'command': 'query-display-options',
  'returns': 'DisplayOptions' }