- CHANGE: Documentation updates
- CHANGE: Examples now build using xcommon-cmake build system (was xcommon)
- CHANGE: AN00129 is now the main library usage example - renamed app_hid_mouse
- REMOVED: AN00124 - now maintained as a separate application note
- REMOVED: AN00125 - now maintained as a separate application note
- REMOVED: AN00126 - now maintained as a separate application note
- REMOVED: AN00127 - now maintained as a separate application note
- REMOVED: AN00131 - now maintained as a separate application note
- REMOVED: AN00132 - now maintained as a separate application note
- REMOVED: AN00135 - now maintained as a separate application note
- REMOVED: AN00136 - now maintained as a separate application note
- CHANGE: RX_RISE_DELAY for XS2A based devices to resolve intermittent transmit timing issues
- FIXED: XS3A based devices not responding to IN packets in SE0_NAK test mode
- ADDED: XMOS proprietary test mode XMOS_IN_ADDR1
- ADDED: Support for XCommon CMake build system
- CHANGE: Removed definition and use of REF_CLK_FREQ in favour of PLATFORM_REFERENCE_MHZ from platform.h
- FIXED: Do not include implementations of inline functions when XUD_WEAK_API is set
- FIXED: XUD_UserSuspend() and XUD_UserResume() now properly marked as weak symbols (#374)
- FIXED: Incorrect time reference used during device attach process (#367)
- FIXED: Syntax error when including xud.h from C
- CHANGE: Various API functions optionally marked as a weak symbol based on XUD_WEAK_API
- FIXED: Control endpoint ready flag not properly cleared on receipt of SETUP transaction (#356)
- CHANGE: Further API functions re-authored in C (were Assembly)
- CHANGE: Endpoints marked as Disabled now reply with STALL if the host attempts to access them, previously they would NAK (#342)
- FIXED: Exception if host accesses an endpoint that XUD believes to be not in use
- FIXED: Timeout event properly cleaned up after tx handshake received (#312)
- FIXED: A control endpoint will respect the halt condition for OUT transactions when marked ready to accept SETUP transactions (#339)
- FIXED: USB Disconnect on self-powered devices intermittently causing Iso EP's to be set to not-ready indefinitely (#351)
- CHANGE: Various optimisations to aid corner-case timings on XS3 based devices
- CHANGE: Some API functions re-authored in C (were Assembly)
- CHANGE: Testbench now more accurately models XS3 based devices
- CHANGE: Endpoint functions called on a halted endpoint will block until the halt condition is cleared
- ADDED: Legacy API wrapper functions/header files
- CHANGE: Shared test code moved to test_support repo
- CHANGE: Clock-blocks 4 & 5 now used (was 2 & 3)
- CHANGE: Most differences required to support different architectures are now handled in a Hardware Abstraction Layer
- RESOLVED: Intermittent enumeration issues at full-speed on XS3A based devices (#259)
- ADDED: Initial support for XS3A based devices
- ADDED: Requirement to define XUD_CORE_CLOCK with xCORE core clock speed in MHz
- CHANGE: Removed support for XS1-G, and XS1-L (including U series) based devices
- RESOLVED: Exception when Endpoint marked as disabled
- RESOLVED: A halted endpoint does not issue a STALL when PINGed (#59)
- RESOLVED: A halted endpoint does not issue a STALL if the endpoint is marked ready (#58)
- CHANGE: Use XMOS Public Licence Version 1
- CHANGE: Python package pinned to versions
- RESOLVED: Cases where disabling RxError caused firmware to crash
- RESOLVED: USB Disconnect on self-powered devices intermittently causing EP set to not-ready indefinitely
- RESOLVED: Disabled erroneous handling of Rx Error line
- CHANGE: First major release.
- CHANGE: Build files updated to support new "xcommon" behaviour in xwaf.
- RESOLVED: Transmit timing fixes for U-series devices (introduced in sc_xud 2.3.0)
- RESOLVED: Continuous suspend/resume notifications when host disconnected (introduced in sc_xud 2.4.2, #11813)
- RESOLVED: Exception raised in GET_STATUS request when null pointer passed for high-speed configuration descriptor
- CHANGE: Fork from sc_xud to lib_xud
- CHANGE: Documentation updates
Note: Forked from sc_xud at this point.
- RESOLVED: Issue referenced as #11813 in 2.4.2 for XS1 devices
- RESOLVED: xCORE-200 USB phy parameters tuned for optimal Tx performance resulting in much improved TX eye diagram and compliance test results
- CHANGE: VBUS connection to xCORE-200 no longer required when using XUD_PWR_BUS i.e. for bus-powered devices. This removes the need to any protection circuitry and allows for a reduced BOM. Note, VBUS should still be present for self powered devices in order to pass USB compliance tests.
- RESOLVED: Device might hang during resume if host follows resume signality with activity after a time close to specified minimum of 1.33us (#11813)
- RESOLVED: Initialisation failure on U-series devices
- RESOLVED: Intermittent initialisation issues with xCORE-200
- RESOLVED: SETUP transaction data CRC not properly checked
- RESOLVED: RxError line from phy handled
- RESOLVED: Isochronous IN endpoints now send an 0-length packet if not ready rather than an (invalid) NAK.
- RESOLVED: Receive of short packets sometimes prematurely ended
- RESOLVED: Data PID not reset to DATA0 in ClearStallByAddr() (used on ClearFeature(HALT) request from host) (#17092)
- CHANGE: Interrupts disabled during any access to usb_tile. Allows greater reliability if user suspend/resume functions enabled interrupts e.g. for role-switch
- RESOLVED: (Minor) XUD_ResetEpStateByAddr() could operate on corresponding OUT endpoint instead of the desired IN endpoint address as passed into the function (and vice versa). Re-introduced into 2.3.0 due to manual merge with lib_usb.
- ADDED: Support for XCORE-200 (libxud_x200.a)
- CHANGE: Compatibility fixes for XMOS toolset version 14 (dual-issue support etc)
- RESOLVED: (Minor) Potential for lock-up when waiting for USB clock on startup. This is is avoided by enabling port buffering on the USB clock port. Affects L/G series only.
- RESOLVED: (Minor) XUD_ResetEpStateByAddr() could operate on corresponding OUT endpoint instead of the desired IN endpoint address as passed into the function (and vice versa)
- CHANGE: Header file comment clarification only
- Changes to dependencies:
- sc_usb: 1.0.3rc0 -> 1.0.4alpha0
- ADDED: Structs for Audio Class 2.0 Mixer and Extension Units
- RESOLVED: Slight optimisations (long jumps replaced with short) to aid inter-packet gaps.
- CHANGE: Timer usage optimisation - usage reduced by one.
- CHANGE: OTG Flags register explicitly cleared at start up - useful if previously running in host mode after a soft-reboot.
- ADDED: Warning emitted when number of cores is greater than 6
- CHANGE: XUD no longer takes a additional chanend parameter for enabling USB test-modes. Test-modes are now enabled via a XUD_SetTestMode() function using a chanend relating to Endpoint 0. This change was made to reduce chanend usage only.
- RESOLVED: (Minor) Error when building module_xud in xTimeComposer due to invalid project files.
- CHANGE: All XUD functions now return XUD_Result_t. Functions that previously returned a buffer length (e.g. XUD_GetBuffer) now require a length param (passed by reference.
- CHANGE: Endpoint ready flags are now reset on bus-reset (if XUD_STATUS_ENABLE used). This means an endpoint can avoid sending/receiving stale data after a bus-reset.
- CHANGE: Reset notifications are now longer hand-shaken back to XUD_Manager in XUD_ResetEndpoint. This reduces the possibility of an Endpoint breaking timing of USB handshake signalling through bad code. XUD functions now check reseting flag to avoid race condition.
- CHANGE: XUD_SetReady_In now implemented using XUD_SetReady_InPtr (previously was duplicated code.
- CHANGE: XUD_ResetEndpoint now in XC. Previously was an ASM wrapper.
- CHANGE: Modifications to xud.h including the use of macros from xccompat.h such that it can be included from .c files.
- CHANGE: XUD_BusSpeed type renamed to XUD_BusSpeed_t in line with naming conventions
- CHANGE: XUD_SetData_Select now takes a reference to XUD_Result_t instead an int
- CHANGE: XUD_GetData_Select now takes an additional XUD_Result_t parameter by reference
- CHANGE: XUD_GetData_Select now returns XUD_RES_ERR instead of a 0 length on packet error (e.g. PID sequence error).
- CHANGE: XUD_SetDevAddr now returns XUD_Result_t
- Changes to dependencies:
- sc_usb: 1.0.2beta1 -> 1.0.3rc0
- CHANGE: Various descriptor structures added, particularly for Audio Class
- CHANGE: Added ComposeSetupBuffer() for creating a buffer from a USB_Setup_Packet_t
- CHANGE: Various function prototypes now using macros from xccompat.h such that then can be
- RESOLVED: (Minor) ULPI data-lines driven hard low and XMOS pull-up on STP line disabled before taking the USB phy out of reset. Previously the phy could clock in erroneous data before the XMOS ULPI interface was initialised causing potential connection issues on initial startup. This affects L/G series libraries only.
- RESOLVED: (Minor) Fixes to improve memory usage such as adding missing resource usage symbols/elimination blocks to assembly file and inlining support functions where appropriate.
- RESOLVED: (Minor) Moved to using supplied tools support for communicating with the USB tile rather than custom implementation (affects U-series lib only).
- Changes to dependencies:
- sc_usb: 1.0.1beta1 -> 1.0.2beta1
- ADDED: USB_BMREQ_D2H_VENDOR_DEV and USB_BMREQ_D2H_VENDOR_DEV defines for vendor device requests
- ADDED: Re-instated support for G devices (xud_g library)
- CHANGE: Power signalling state machines simplified in order to reduce memory usage
- RESOLVED: (Minor) Reduced delay before transmitting k-chirp for high-speed mode, this improves high-speed handshake reliability on some hosts
- RESOLVED: (Major) Resolved a compatibility issue with Intel USB 3.0 xHCI host controllers relating to tight inter-packet timing resulting in packet loss
- Initial stand-alone release