seq-full.hcl

#/* $begin seq-all-hcl */
####################################################################
#  HCL Description of Control for Single Cycle Y86-64 Processor SEQ   #
#  Copyright (C) Randal E. Bryant, David R. O'Hallaron, 2010       #
####################################################################

## Your task is to implement the iaddq instruction
## The file contains a declaration of the icodes
## for iaddq (IIADDQ)
## Your job is to add the rest of the logic to make it work

####################################################################
#    C Include's.  Don't alter these                               #
####################################################################

quote '#include <stdio.h>'
quote '#include "isa.h"'
quote '#include "sim.h"'
quote 'int sim_main(int argc, char *argv[]);'
quote 'word_t gen_pc(){return 0;}'
quote 'int main(int argc, char *argv[])'
quote '  {plusmode=0;return sim_main(argc,argv);}'

####################################################################
#    Declarations.  Do not change/remove/delete any of these       #
####################################################################

##### Symbolic representation of Y86-64 Instruction Codes #############
wordsig INOP 	'I_NOP'
wordsig IHALT	'I_HALT'
wordsig IRRMOVQ	'I_RRMOVQ'
wordsig IIRMOVQ	'I_IRMOVQ'
wordsig IRMMOVQ	'I_RMMOVQ'
wordsig IMRMOVQ	'I_MRMOVQ'
wordsig IOPQ	'I_ALU'
wordsig IJXX	'I_JMP'
wordsig ICALL	'I_CALL'
wordsig IRET	'I_RET'
wordsig IPUSHQ	'I_PUSHQ'
wordsig IPOPQ	'I_POPQ'
# Instruction code for iaddq instruction
wordsig IIADDQ	'I_IADDQ'

##### Symbolic represenations of Y86-64 function codes                  #####
wordsig FNONE    'F_NONE'        # Default function code

##### Symbolic representation of Y86-64 Registers referenced explicitly #####
wordsig RRSP     'REG_RSP'    	# Stack Pointer
wordsig RNONE    'REG_NONE'   	# Special value indicating "no register"

##### ALU Functions referenced explicitly                            #####
wordsig ALUADD	'A_ADD'		# ALU should add its arguments

##### Possible instruction status values                             #####
wordsig SAOK	'STAT_AOK'	# Normal execution
wordsig SADR	'STAT_ADR'	# Invalid memory address
wordsig SINS	'STAT_INS'	# Invalid instruction
wordsig SHLT	'STAT_HLT'	# Halt instruction encountered

##### Signals that can be referenced by control logic ####################

##### Fetch stage inputs		#####
wordsig pc 'pc'				# Program counter
##### Fetch stage computations		#####
wordsig imem_icode 'imem_icode'		# icode field from instruction memory
wordsig imem_ifun  'imem_ifun' 		# ifun field from instruction memory
wordsig icode	  'icode'		# Instruction control code
wordsig ifun	  'ifun'		# Instruction function
wordsig rA	  'ra'			# rA field from instruction
wordsig rB	  'rb'			# rB field from instruction
wordsig valC	  'valc'		# Constant from instruction
wordsig valP	  'valp'		# Address of following instruction
boolsig imem_error 'imem_error'		# Error signal from instruction memory
boolsig instr_valid 'instr_valid'	# Is fetched instruction valid?

##### Decode stage computations		#####
wordsig valA	'vala'			# Value from register A port
wordsig valB	'valb'			# Value from register B port

##### Execute stage computations	#####
wordsig valE	'vale'			# Value computed by ALU
boolsig Cnd	'cond'			# Branch test

##### Memory stage computations		#####
wordsig valM	'valm'			# Value read from memory
boolsig dmem_error 'dmem_error'		# Error signal from data memory


####################################################################
#    Control Signal Definitions.                                   #
####################################################################

################ Fetch Stage     ###################################

# Determine instruction code
word icode = [
	imem_error: INOP;
	1: imem_icode;		# Default: get from instruction memory
];

# Determine instruction function
word ifun = [
	imem_error: FNONE;
	1: imem_ifun;		# Default: get from instruction memory
];

bool instr_valid = icode in 
	{ INOP, IHALT, IRRMOVQ, IIRMOVQ, IRMMOVQ, IMRMOVQ,
	       IOPQ, IJXX, ICALL, IRET, IPUSHQ, IPOPQ, IIADDQ };

# Does fetched instruction require a regid byte?
bool need_regids =
	icode in { IRRMOVQ, IOPQ, IPUSHQ, IPOPQ, 
		     IIRMOVQ, IRMMOVQ, IMRMOVQ, IIADDQ };

# Does fetched instruction require a constant word?
bool need_valC =
	icode in { IIRMOVQ, IRMMOVQ, IMRMOVQ, IJXX, ICALL, IIADDQ };

################ Decode Stage    ###################################

## What register should be used as the A source?
word srcA = [
	icode in { IRRMOVQ, IRMMOVQ, IOPQ, IPUSHQ  } : rA;
	icode in { IPOPQ, IRET } : RRSP;
	1 : RNONE; # Don't need register
];

## What register should be used as the B source?
word srcB = [
	icode in { IOPQ, IRMMOVQ, IMRMOVQ，IIADDQ } : rB;
	icode in { IPUSHQ, IPOPQ, ICALL, IRET } : RRSP;
	1 : RNONE;  # Don't need register
];

## What register should be used as the E destination?
word dstE = [
	icode in { IRRMOVQ } && Cnd : rB;
	icode in { IIRMOVQ, IOPQ，IIADDQ } : rB;
	icode in { IPUSHQ, IPOPQ, ICALL, IRET } : RRSP;
	1 : RNONE;  # Don't write any register
];

## What register should be used as the M destination?
word dstM = [
	icode in { IMRMOVQ, IPOPQ } : rA;
	1 : RNONE;  # Don't write any register
];

################ Execute Stage   ###################################

## Select input A to ALU
word aluA = [
	icode in { IRRMOVQ, IOPQ } : valA;
	icode in { IIRMOVQ, IRMMOVQ, IMRMOVQ, IIADDQ } : valC;
	icode in { ICALL, IPUSHQ } : -8;
	icode in { IRET, IPOPQ } : 8;
	# Other instructions don't need ALU
];

## Select input B to ALU
word aluB = [
	icode in { IRMMOVQ, IMRMOVQ, IOPQ, ICALL, 
		      IPUSHQ, IRET, IPOPQ, IIADDQ } : valB;
	icode in { IRRMOVQ, IIRMOVQ } : 0;
	# Other instructions don't need ALU
];

## Set the ALU function
word alufun = [
	icode == IOPQ : ifun;
	1 : ALUADD;
];

## Should the condition codes be updated?
bool set_cc = icode in { IOPQ, IIADDQ };

################ Memory Stage    ###################################

## Set read control signal
bool mem_read = icode in { IMRMOVQ, IPOPQ, IRET };

## Set write control signal
bool mem_write = icode in { IRMMOVQ, IPUSHQ, ICALL };

## Select memory address
word mem_addr = [
	icode in { IRMMOVQ, IPUSHQ, ICALL, IMRMOVQ } : valE;
	icode in { IPOPQ, IRET } : valA;
	# Other instructions don't need address
];

## Select memory input data
word mem_data = [
	# Value from register
	icode in { IRMMOVQ, IPUSHQ } : valA;
	# Return PC
	icode == ICALL : valP;
	# Default: Don't write anything
];

## Determine instruction status
word Stat = [
	imem_error || dmem_error : SADR;
	!instr_valid: SINS;
	icode == IHALT : SHLT;
	1 : SAOK;
];

################ Program Counter Update ############################

## What address should instruction be fetched at

word new_pc = [
	# Call.  Use instruction constant
	icode == ICALL : valC;
	# Taken branch.  Use instruction constant
	icode == IJXX && Cnd : valC;
	# Completion of RET instruction.  Use value from stack
	icode == IRET : valM;
	# Default: Use incremented PC
	1 : valP;
];
#/* $end seq-all-hcl */