Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

Documentation/ABI/testing/sysfs-class-typec

@@ -0,0 +1,276 @@
+USB Type-C port devices (eg. /sys/class/typec/port0/)
+
+What:		/sys/class/typec/<port>/data_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported USB data roles. This attribute can be used for
+		requesting data role swapping on the port. Swapping is supported
+		as synchronous operation, so write(2) to the attribute will not
+		return until the operation has finished. The attribute is
+		notified about role changes so that poll(2) on the attribute
+		wakes up. Change on the role will also generate uevent
+		KOBJ_CHANGE on the port. The current role is show in brackets,
+		for example "[host] device" when DRP port is in host mode.
+
+		Valid values: host, device
+
+What:		/sys/class/typec/<port>/power_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The supported power roles. This attribute can be used to request
+		power role swap on the port when the port supports USB Power
+		Delivery. Swapping is supported as synchronous operation, so
+		write(2) to the attribute will not return until the operation
+		has finished. The attribute is notified about role changes so
+		that poll(2) on the attribute wakes up. Change on the role will
+		also generate uevent KOBJ_CHANGE. The current role is show in
+		brackets, for example "[source] sink" when in source mode.
+
+		Valid values: source, sink
+
+What:		/sys/class/typec/<port>/vconn_source
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows is the port VCONN Source. This attribute can be used to
+		request VCONN swap to change the VCONN Source during connection
+		when both the port and the partner support USB Power Delivery.
+		Swapping is supported as synchronous operation, so write(2) to
+		the attribute will not return until the operation has finished.
+		The attribute is notified about VCONN source changes so that
+		poll(2) on the attribute wakes up. Change on VCONN source also
+		generates uevent KOBJ_CHANGE.
+
+		Valid values:
+		- "no" when the port is not the VCONN Source
+		- "yes" when the port is the VCONN Source
+
+What:		/sys/class/typec/<port>/power_operation_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the current power operational mode the port is in. The
+		power operation mode means current level for VBUS. In case USB
+		Power Delivery communication is used for negotiating the levels,
+		power operation mode should show "usb_power_delivery".
+
+		Valid values:
+		- default
+		- 1.5A
+		- 3.0A
+		- usb_power_delivery
+
+What:		/sys/class/typec/<port>/preferred_role
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The user space can notify the driver about the preferred role.
+		It should be handled as enabling of Try.SRC or Try.SNK, as
+		defined in USB Type-C specification, in the port drivers. By
+		default the preferred role should come from the platform.
+
+		Valid values: source, sink, none (to remove preference)
+
+What:		/sys/class/typec/<port>/supported_accessory_modes
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of accessory modes, defined in the USB
+		Type-C specification, the port supports.
+
+What:		/sys/class/typec/<port>/usb_power_delivery_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Power Delivery
+		specification, or 0 when USB Power Delivery is not supported.
+
+What:		/sys/class/typec/<port>/usb_typec_revision
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Revision number of the supported USB Type-C specification.
+
+
+USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
+
+What:		/sys/class/typec/<port>-partner/accessory_mode
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the Accessory Mode name when the partner is an Accessory.
+		The Accessory Modes are defined in USB Type-C Specification.
+
+What:		/sys/class/typec/<port>-partner/supports_usb_power_delivery
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the partner supports USB Power Delivery communication:
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>-partner>/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported, for example when USB power delivery
+		communication for the port is mostly handled in firmware. If the
+		directory exists, it will have an attribute file for every VDO
+		in Discover Identity command result.
+
+What:		/sys/class/typec/<port>-partner/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-partner/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
+
+Note: Electronically Marked Cables will have a device also for one cable plug
+(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
+Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
+second device also for the other plug. Both plugs may have alternate modes as
+described in USB Type-C and USB Power Delivery specifications.
+
+What:		/sys/class/typec/<port>-cable/type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the cable is active.
+		Valid values: active, passive
+
+What:		/sys/class/typec/<port>-cable/plug_type
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows type of the plug on the cable:
+		- type-a - Standard A
+		- type-b - Standard B
+		- type-c
+		- captive
+
+What:		/sys/class/typec/<port>-cable/identity/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This directory appears only if the port device driver is capable
+		of showing the result of Discover Identity USB power delivery
+		command. That will not always be possible even when USB power
+		delivery is supported. If the directory exists, it will have an
+		attribute for every VDO returned by Discover Identity command.
+
+What:		/sys/class/typec/<port>-cable/identity/id_header
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		ID Header VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/cert_stat
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Cert Stat VDO part of Discover Identity command result. The
+		value will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+What:		/sys/class/typec/<port>-cable/identity/product
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Product VDO part of Discover Identity command result. The value
+		will show 0 until Discover Identity command result becomes
+		available. The value can be polled.
+
+
+Alternate Mode devices.
+
+The alternate modes will have Standard or Vendor ID (SVID) assigned by USB-IF.
+The ports, partners and cable plugs can have alternate modes. A supported SVID
+will consist of a set of modes. Every SVID a port/partner/plug supports will
+have a device created for it, and every supported mode for a supported SVID will
+have its own directory under that device. Below <dev> refers to the device for
+the alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/svid
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The SVID (Standard or Vendor ID) assigned by USB-IF for this
+		alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Every supported mode will have its own directory. The name of
+		a mode will be "mode<index>" (for example mode1), where <index>
+		is the actual index to the mode VDO returned by Discover Modes
+		USB power delivery command.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows description of the mode. The description is optional for
+		the drivers, just like with the Billboard Devices.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the VDO in hexadecimal returned by Discover Modes command
+		for this mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the mode is active or not. The attribute can be used
+		for entering/exiting the mode with partners and cable plugs, and
+		with the port alternate modes it can be used for disabling
+		support for specific alternate modes. Entering/exiting modes is
+		supported as synchronous operation so write(2) to the attribute
+		does not return until the enter/exit mode operation has
+		finished. The attribute is notified when the mode is
+		entered/exited so poll(2) on the attribute wakes up.
+		Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
+
+		Valid values: yes, no
+
+What:		/sys/class/typec/<port>/<dev>/mode<index>/supported_roles
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Space separated list of the supported roles.
+
+		This attribute is available for the devices describing the
+		alternate modes a port supports, and it will not be exposed with
+		the devices presenting the alternate modes the partners or cable
+		plugs support.
+
+		Valid values: source, sink

Documentation/ABI/testing/sysfs-platform-chipidea-usb2

@@ -0,0 +1,9 @@
+What:		/sys/bus/platform/devices/ci_hdrc.0/role
+Date:		Mar 2017
+Contact:	Peter Chen <peter.chen@nxp.com>
+Description:
+		It returns string "gadget" or "host" when read it, it indicates
+		current controller role.
+
+		It will do role switch when write "gadget" or "host" to it.
+		Only controller at dual-role configuration supports writing.

Documentation/ABI/testing/sysfs-platform-renesas_usb3

@@ -0,0 +1,15 @@
+What:		/sys/devices/platform/<renesas_usb3's name>/role
+Date:		March 2017
+KernelVersion:	4.13
+Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Description:
+		This file can be read and write.
+		The file can show/change the drd mode of usb.
+
+		Write the following string to change the mode:
+		 "host" - switching mode from peripheral to host.
+		 "peripheral" - switching mode from host to peripheral.
+
+		Read the file, then it shows the following strings:
+		 "host" - The mode is host now.
+		 "peripheral" - The mode is peripheral now.