Weave Scope automatically generates a map of your containers, enabling you to intuitively understand, monitor, and control your applications.
sudo wget -O /usr/local/bin/scope \
https://github.com/weaveworks/scope/releases/download/latest_release/scope
sudo chmod a+x /usr/local/bin/scope
sudo scope launch
This script will download and run a recent Scope image from the Docker Hub.
Now, open your web browser to http://localhost:4040. (If you're using
boot2docker, replace localhost with the output of boot2docker ip.)
Scope does not need any configuration and does not require the Weave Network. But Scope does need to be running on every machine you want to monitor.
Weave Scope consists of two components: the app and the probe. These two
components are deployed as a single Docker container using the scope
script.
The probe is responsible for gathering information about the host is it running on. This information is sent to the app in the form of a report. The app is responsible for processing reports from the probe into usable topologies, serving the UI, and pushing these topologies to the UI.
+--Docker host----------+
| +--Container------+ | .---------------.
| | | | | Browser |
| | +-----------+ | | |---------------|
| | | scope-app |<---------| |
| | +-----------+ | | | |
| | ^ | | | |
| | | | | '---------------'
| | +-------------+ | |
| | | scope-probe | | |
| | +-------------+ | |
| | | |
| +-----------------+ |
+-----------------------+
When running Scope in a cluster, each probe sends reports to each app. The App merges the reports from each probe into a more complete report. You need to run Scope on every machine you want to monitor.
+--Docker host----------+ +--Docker host----------+
| +--Container------+ | | +--Container------+ |
| | | | | | | |
| | +-----------+ | | | | +-----------+ | |
| | | scope-app |<-----. .----->| scope-app | | |
| | +-----------+ | | \ / | | +-----------+ | |
| | ^ | | \/ | | ^ | |
| | | | | /\ | | | | |
| | +-------------+ | | / \ | | +-------------+ | |
| | | scope-probe |-----' '-----| scope-probe | | |
| | +-------------+ | | | | +-------------+ | |
| | | | | | | |
| +-----------------+ | | +-----------------+ |
+-----------------------+ +-----------------------+
If you run Scope on the same machine as the Weave Network, the probe will use weaveDNS to automatically discover other apps on your network. Scope acheives this by registering itself under the address scope.weave.local. Each probe will send reports to every app registered under this address. Therefore, if you have a running weaveDNS setup, you do not need to take any further steps.
If you do not wish to use weaveDNS, you can instruct Scope to cluster with other Scope instances on the command line. Hostnames and IP addresses are acceptable, both with and without ports:
# scope launch scope1:4030 192.168.0.12 192.168.0.11:4030
Hostnames will be regularly resolved as A records, and each answer used as a target.
Scope can also be used to feed reports to the Scope Service. The Scope Service allows you centrally manage and share access to your Scope UI. In this configuration, you only run the probe locally; the apps are hosted for you.
To get an account on the Scope Service, sign up at scope.weave.works. You need to run a probe on every machine you want to monitor with Scope. To launch a probe and send reports to the service, run the following command:
sudo scope launch --service-token=<token>
.-~~~-.
.- ~'` )_ ___
/ `-' )_
| scope.weave.works \
\ .'
~-______________..--'
^^
||
||
+--Docker host----------+ || +--Docker host----------+
| +--Container------+ | || | +--Container------+ |
| | | | || | | | |
| | +-------------+ | | / \ | | +-------------+ | |
| | | scope-probe |-----' '-----| scope-probe | | |
| | +-------------+ | | | | +-------------+ | |
| | | | | | | |
| +-----------------+ | | +-----------------+ |
+-----------------------+ +-----------------------+
To use Scope's Kubernetes integration, you need to start Scope with the
--probe.kubernetes true flag. Scope needs to be installed on all
nodes (master and minions), but this flag should only be enabled on the
Kubernetes master node.
As per the normal requirements, you will need to run Scope on every machine you want to monitor, as shown in Getting Started. However, when launching Scope you need to pass different arguments to the Kubernetes master and minion nodes.
On the master node you need to launch Scope with Kubernetes support:
sudo scope launch --probe.kubernetes true
Depending on your setup, you may find that Kubernetes has renamed your
Docker bridge interface. In this instance you'll need to tell Scope
about the new name when launching it. For example, if your Docker bridge is
named cbr0:
sudo DOCKER_BRIDGE=cbr0 scope launch --probe.docker.bridge cbr0 --probe.kubernetes true
On each minion node you need to launch Scope telling it to connect to the master node.
sudo scope launch --no-app kubernetes-master.my.network
Again, if your Docker bridge interface is named differently, you'll need to pass that to your probe when launching it.
Once the first few reports come in, the UI should begin displaying two Kubernetes-specific views "Pods", and "Pods by Service".
The build is in five stages. make deps installs some tools we use later in
the build. make frontend builds a UI build image with all NPM dependencies.
make static compiles the UI into static.go which is part of the repository
for convenience. The final make builds the app and probe, in a container,
and pushes the lot into a Docker image called weaveworks/scope.
make deps
make frontend
make static
make
Then, run the local build via
./scope launch
