Click on the button below:
Or, in your Home Assistant, navigate to Configuration > Add-ons, Backups & Supervisor > Add-on Store > ... > Repositories and add https://github.com/tube0013/tubeszb_addons to the list.
- Navigate in your Home Assistant frontend to Settings -> Add-ons, Backup & Supervisor -> Add-on Store.
- Find the "TubesZB Silicon Labs FW Flasher" add-on and click it.
- Click on the "INSTALL" button.
The add-on needs a Silicon Labs based wireless module accessible through a network serial port defined by IP addres and port or other USB based wireless adapters.
Disable ZHA or Z2M
- In the add-on configuration enter the IP_ADDRESS:port in the Network Device entry form
- Select any serial device to make the form happy
- Paste the link the the firmware .GBL file to be used for the update and press
Save. - Start the add-on.
- Monitor the flash by going to the addon log page, and refreshing periodically.
- In the add-on configuratione enter some text into the Network Device entry form to kmake the form happy
- Select the correct serial device from the list of devices detect, Toggle the switch to enable USB Flash
- Paste the link the the firmware .GBL file to be used for the update and press
Save. - Start the add-on.
- Monitor the flash by going to the addon log page, and refreshing periodically.
Add-on configuration:
| Configuration | Description |
|---|---|
| device | Serial service where the Silicon Labs radio is attached |
| network_device | Network Serial port (IP_ADDRESS:PORT) |
| baudrate | Serial port baudrate (depends on firmware) |
| flow_control | If hardware flow control should be enabled (depends on firmware) |
| firmware_url | Custom URL to flash firmware from |