ArduPlane.cpp

/*
   Lead developer: Andrew Tridgell
 
   Authors:    Doug Weibel, Jose Julio, Jordi Munoz, Jason Short, Randy Mackay, Pat Hickey, John Arne Birkeland, Olivier Adler, Amilcar Lucas, Gregory Fletcher, Paul Riseborough, Brandon Jones, Jon Challinger, Tom Pittenger
   Thanks to:  Chris Anderson, Michael Oborne, Paul Mather, Bill Premerlani, James Cohen, JB from rotorFX, Automatik, Fefenin, Peter Meister, Remzibi, Yury Smirnov, Sandro Benigno, Max Levine, Roberto Navoni, Lorenz Meier, Yury MonZon

   Please contribute your ideas! See https://ardupilot.org/dev for details

   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "Plane.h"

#define SCHED_TASK(func, rate_hz, max_time_micros) SCHED_TASK_CLASS(Plane, &plane, func, rate_hz, max_time_micros)


/*
  scheduler table - all regular tasks are listed here, along with how
  often they should be called (in Hz) and the maximum time
  they are expected to take (in microseconds)
 */
const AP_Scheduler::Task Plane::scheduler_tasks[] = {
                           // Units:   Hz      us
    SCHED_TASK(ahrs_update,           400,    400),
    SCHED_TASK(read_radio,             50,    100),
    SCHED_TASK(check_short_failsafe,   50,    100),
    SCHED_TASK(update_speed_height,    50,    200),
    SCHED_TASK(update_control_mode,   400,    100),
    SCHED_TASK(stabilize,             400,    100),
    SCHED_TASK(set_servos,            400,    100),
    SCHED_TASK(update_throttle_hover, 100,     90),
    SCHED_TASK(read_control_switch,     7,    100),
    SCHED_TASK(update_GPS_50Hz,        50,    300),
    SCHED_TASK(update_GPS_10Hz,        10,    400),
    SCHED_TASK(navigate,               10,    150),
    SCHED_TASK(update_compass,         10,    200),
    SCHED_TASK(read_airspeed,          10,    100),
    SCHED_TASK(update_alt,             10,    200),
    SCHED_TASK(adjust_altitude_target, 10,    200),
#if ADVANCED_FAILSAFE == ENABLED
    SCHED_TASK(afs_fs_check,           10,    100),
#endif
    SCHED_TASK(ekf_check,              10,     75),
    SCHED_TASK_CLASS(GCS,            (GCS*)&plane._gcs,       update_receive,   300,  500),
    SCHED_TASK_CLASS(GCS,            (GCS*)&plane._gcs,       update_send,      300,  750),
    SCHED_TASK_CLASS(AP_ServoRelayEvents, &plane.ServoRelayEvents, update_events,          50,  150),
    SCHED_TASK_CLASS(AP_BattMonitor, &plane.battery, read, 10, 300),
    SCHED_TASK_CLASS(AP_Baro, &plane.barometer, accumulate, 50, 150),
    SCHED_TASK_CLASS(AP_Notify,      &plane.notify,  update, 50, 300),
#if AC_FENCE == ENABLED
    SCHED_TASK_CLASS(AC_Fence,       &plane.fence,   update, 10, 100),
#endif
    SCHED_TASK(read_rangefinder,       50,    100),
    SCHED_TASK_CLASS(AP_ICEngine, &plane.g2.ice_control, update, 10, 100),
    SCHED_TASK_CLASS(Compass,          &plane.compass,              cal_update, 50, 50),
#if OPTFLOW == ENABLED
    SCHED_TASK_CLASS(OpticalFlow, &plane.optflow, update,    50,    50),
#endif
    SCHED_TASK(one_second_loop,         1,    400),
    SCHED_TASK(three_hz_loop,           3,    75),
    SCHED_TASK(check_long_failsafe,     3,    400),
    SCHED_TASK(rpm_update,             10,    100),
#if AP_AIRSPEED_AUTOCAL_ENABLE
    SCHED_TASK(airspeed_ratio_update,   1,    100),
#endif // AP_AIRSPEED_AUTOCAL_ENABLE
#if HAL_MOUNT_ENABLED
    SCHED_TASK_CLASS(AP_Mount, &plane.camera_mount, update, 50, 100),
#endif // HAL_MOUNT_ENABLED
#if CAMERA == ENABLED
    SCHED_TASK_CLASS(AP_Camera, &plane.camera, update,      50, 100),
#endif // CAMERA == ENABLED
    SCHED_TASK_CLASS(AP_Scheduler, &plane.scheduler, update_logging,         0.2,    100),
    SCHED_TASK(compass_save,          0.1,    200),
    SCHED_TASK(Log_Write_Fast,        400,    300),
    SCHED_TASK(update_logging1,        25,    300),
    SCHED_TASK(update_logging2,        25,    300),
#if HAL_SOARING_ENABLED
    SCHED_TASK(update_soaring,         50,    400),
#endif
    SCHED_TASK(parachute_check,        10,    200),
#if AP_TERRAIN_AVAILABLE
    SCHED_TASK_CLASS(AP_Terrain, &plane.terrain, update, 10, 200),
#endif // AP_TERRAIN_AVAILABLE
    SCHED_TASK(update_is_flying_5Hz,    5,    100),
#if LOGGING_ENABLED == ENABLED
    SCHED_TASK_CLASS(AP_Logger, &plane.logger, periodic_tasks, 50, 400),
#endif
    SCHED_TASK_CLASS(AP_InertialSensor, &plane.ins, periodic, 50, 50),
#if HAL_ADSB_ENABLED    
    SCHED_TASK(avoidance_adsb_update,  10,    100),
#endif
    SCHED_TASK_CLASS(RC_Channels,       (RC_Channels*)&plane.g2.rc_channels, read_aux_all,           10,    200),
#if HAL_BUTTON_ENABLED
    SCHED_TASK_CLASS(AP_Button, &plane.button, update, 5, 100),
#endif
#if STATS_ENABLED == ENABLED
    SCHED_TASK_CLASS(AP_Stats, &plane.g2.stats, update, 1, 100),
#endif
#if GRIPPER_ENABLED == ENABLED
    SCHED_TASK_CLASS(AP_Gripper, &plane.g2.gripper, update, 10, 75),
#endif
#if LANDING_GEAR_ENABLED == ENABLED
    SCHED_TASK(landing_gear_update, 5, 50),
#endif
};

void Plane::get_scheduler_tasks(const AP_Scheduler::Task *&tasks,
                                uint8_t &task_count,
                                uint32_t &log_bit)
{
    tasks = &scheduler_tasks[0];
    task_count = ARRAY_SIZE(scheduler_tasks);
    log_bit = MASK_LOG_PM;
}

#if HAL_QUADPLANE_ENABLED
constexpr int8_t Plane::_failsafe_priorities[7];
#else
constexpr int8_t Plane::_failsafe_priorities[6];
#endif

// update AHRS system
void Plane::ahrs_update()
{
    arming.update_soft_armed();

    ahrs.update();

    if (should_log(MASK_LOG_IMU)) {
        AP::ins().Write_IMU();
    }

    // calculate a scaled roll limit based on current pitch
    roll_limit_cd = aparm.roll_limit_cd;
    pitch_limit_min_cd = aparm.pitch_limit_min_cd;

    bool rotate_limits = true;
#if HAL_QUADPLANE_ENABLED
    if (quadplane.tailsitter.active()) {
        rotate_limits = false;
    }
#endif
    if (rotate_limits) {
        roll_limit_cd *= ahrs.cos_pitch();
        pitch_limit_min_cd *= fabsf(ahrs.cos_roll());
    }

    // updated the summed gyro used for ground steering and
    // auto-takeoff. Dot product of DCM.c with gyro vector gives earth
    // frame yaw rate
    steer_state.locked_course_err += ahrs.get_yaw_rate_earth() * G_Dt;
    steer_state.locked_course_err = wrap_PI(steer_state.locked_course_err);

#if HAL_QUADPLANE_ENABLED
    // check if we have had a yaw reset from the EKF
    quadplane.check_yaw_reset();

    // update inertial_nav for quadplane
    quadplane.inertial_nav.update();
#endif
}

/*
  update 50Hz speed/height controller
 */
void Plane::update_speed_height(void)
{
    if (control_mode->does_auto_throttle()) {
	    // Call TECS 50Hz update. Note that we call this regardless of
	    // throttle suppressed, as this needs to be running for
	    // takeoff detection
        SpdHgt_Controller->update_50hz();
    }

#if HAL_QUADPLANE_ENABLED
    if (quadplane.in_vtol_mode() ||
        quadplane.in_assisted_flight()) {
        quadplane.update_throttle_mix();
    }
#endif
}


/*
  read and update compass
 */
void Plane::update_compass(void)
{
    compass.read();
}

/*
  do 10Hz logging
 */
void Plane::update_logging1(void)
{
    if (should_log(MASK_LOG_ATTITUDE_MED) && !should_log(MASK_LOG_ATTITUDE_FAST)) {
        Log_Write_Attitude();
    }

    if (should_log(MASK_LOG_ATTITUDE_MED) && !should_log(MASK_LOG_IMU))
        AP::ins().Write_IMU();

    if (should_log(MASK_LOG_ATTITUDE_MED))
        ahrs.Write_AOA_SSA();
}

/*
  do 10Hz logging - part2
 */
void Plane::update_logging2(void)
{
    if (should_log(MASK_LOG_CTUN)) {
        Log_Write_Control_Tuning();
#if HAL_GYROFFT_ENABLED
        gyro_fft.write_log_messages();
#else
        write_notch_log_messages();
#endif
    }
    
    if (should_log(MASK_LOG_NTUN)) {
        Log_Write_Nav_Tuning();
        Log_Write_Guided();
    }

    if (should_log(MASK_LOG_RC))
        Log_Write_RC();

    if (should_log(MASK_LOG_IMU))
        AP::ins().Write_Vibration();
}


/*
  check for AFS failsafe check
 */
#if ADVANCED_FAILSAFE == ENABLED
void Plane::afs_fs_check(void)
{
    // perform AFS failsafe checks
#if AC_FENCE == ENABLED
    const bool fence_breached = fence.get_breaches() != 0;
#else
    const bool fence_breached = false;
#endif
    afs.check(fence_breached, failsafe.AFS_last_valid_rc_ms);
}
#endif

#if HAL_WITH_IO_MCU
#include <AP_IOMCU/AP_IOMCU.h>
extern AP_IOMCU iomcu;
#endif

void Plane::one_second_loop()
{
    // make it possible to change control channel ordering at runtime
    set_control_channels();

#if HAL_WITH_IO_MCU
    iomcu.setup_mixing(&rcmap, g.override_channel.get(), g.mixing_gain, g2.manual_rc_mask);
#endif

    // make it possible to change orientation at runtime
    ahrs.update_orientation();
#if HAL_ADSB_ENABLED
    adsb.set_stall_speed_cm(aparm.airspeed_min * 100); // convert m/s to cm/s
    adsb.set_max_speed(aparm.airspeed_max);
#endif

    if (g2.flight_options & FlightOptions::ENABLE_DEFAULT_AIRSPEED) {
        // use average of min and max airspeed as default airspeed fusion with high variance
        ahrs.writeDefaultAirSpeed((float)((aparm.airspeed_min + aparm.airspeed_max)/2),
                                  (float)((aparm.airspeed_max - aparm.airspeed_min)/2));
    }

    // sync MAVLink system ID
    mavlink_system.sysid = g.sysid_this_mav;

    SRV_Channels::enable_aux_servos();

    // update notify flags
    AP_Notify::flags.pre_arm_check = arming.pre_arm_checks(false);
    AP_Notify::flags.pre_arm_gps_check = true;
    AP_Notify::flags.armed = arming.is_armed() || arming.arming_required() == AP_Arming::Required::NO;

#if AP_TERRAIN_AVAILABLE
    if (should_log(MASK_LOG_GPS)) {
        terrain.log_terrain_data();
    }
#endif

    // update home position if NOT armed and gps position has
    // changed. Update every 5s at most
    if (!arming.is_armed() &&
        gps.last_message_time_ms() - last_home_update_ms > 5000 &&
        gps.status() >= AP_GPS::GPS_OK_FIX_3D) {
            last_home_update_ms = gps.last_message_time_ms();
            update_home();
            
            // reset the landing altitude correction
            landing.alt_offset = 0;
    }
}

void Plane::three_hz_loop()
{
#if AC_FENCE == ENABLED
    fence_check();
#endif
}

void Plane::compass_save()
{
    if (AP::compass().available() &&
        compass.get_learn_type() >= Compass::LEARN_INTERNAL &&
        !hal.util->get_soft_armed()) {
        /*
          only save offsets when disarmed
         */
        compass.save_offsets();
    }
}

#if AP_AIRSPEED_AUTOCAL_ENABLE
/*
  once a second update the airspeed calibration ratio
 */
void Plane::airspeed_ratio_update(void)
{
    if (!airspeed.enabled() ||
        gps.status() < AP_GPS::GPS_OK_FIX_3D ||
        gps.ground_speed() < 4) {
        // don't calibrate when not moving
        return;        
    }
    if (airspeed.get_airspeed() < aparm.airspeed_min && 
        gps.ground_speed() < (uint32_t)aparm.airspeed_min) {
        // don't calibrate when flying below the minimum airspeed. We
        // check both airspeed and ground speed to catch cases where
        // the airspeed ratio is way too low, which could lead to it
        // never coming up again
        return;
    }
    if (labs(ahrs.roll_sensor) > roll_limit_cd ||
        ahrs.pitch_sensor > aparm.pitch_limit_max_cd ||
        ahrs.pitch_sensor < pitch_limit_min_cd) {
        // don't calibrate when going beyond normal flight envelope
        return;
    }
    const Vector3f &vg = gps.velocity();
    airspeed.update_calibration(vg, aparm.airspeed_max);
}
#endif // AP_AIRSPEED_AUTOCAL_ENABLE

/*
  read the GPS and update position
 */
void Plane::update_GPS_50Hz(void)
{
    gps.update();

    // get position from AHRS
    have_position = ahrs.get_position(current_loc);
    ahrs.get_relative_position_D_home(relative_altitude);
    relative_altitude *= -1.0f;
}

/*
  read update GPS position - 10Hz update
 */
void Plane::update_GPS_10Hz(void)
{
    static uint32_t last_gps_msg_ms;
    if (gps.last_message_time_ms() != last_gps_msg_ms && gps.status() >= AP_GPS::GPS_OK_FIX_3D) {
        last_gps_msg_ms = gps.last_message_time_ms();

        if (ground_start_count > 1) {
            ground_start_count--;
        } else if (ground_start_count == 1) {
            // We countdown N number of good GPS fixes
            // so that the altitude is more accurate
            // -------------------------------------
            if (current_loc.lat == 0 && current_loc.lng == 0) {
                ground_start_count = 5;

            } else if (!hal.util->was_watchdog_reset()) {
                if (!set_home_persistently(gps.location())) {
                    // silently ignore failure...
                }

                next_WP_loc = prev_WP_loc = home;

                ground_start_count = 0;
            }
        }

        // update wind estimate
        ahrs.estimate_wind();
    } else if (gps.status() < AP_GPS::GPS_OK_FIX_3D && ground_start_count != 0) {
        // lost 3D fix, start again
        ground_start_count = 5;
    }

    calc_gndspeed_undershoot();
}

/*
  main control mode dependent update code
 */
void Plane::update_control_mode(void)
{
    if (control_mode != &mode_auto) {
        // hold_course is only used in takeoff and landing
        steer_state.hold_course_cd = -1;
    }

    update_fly_forward();

    control_mode->update();
}


void Plane::update_fly_forward(void)
{
    // ensure we are fly-forward when we are flying as a pure fixed
    // wing aircraft. This helps the EKF produce better state
    // estimates as it can make stronger assumptions
#if HAL_QUADPLANE_ENABLED
    if (quadplane.available() &&
        quadplane.tailsitter.is_in_fw_flight()) {
        ahrs.set_fly_forward(true);
        return;
    }

    if (quadplane.in_vtol_mode() ||
        quadplane.in_assisted_flight()) {
        ahrs.set_fly_forward(false);
        return;
    }
#endif

    if (flight_stage == AP_Vehicle::FixedWing::FLIGHT_LAND) {
        ahrs.set_fly_forward(landing.is_flying_forward());
        return;
    }

    ahrs.set_fly_forward(true);
}

/*
  set the flight stage
 */
void Plane::set_flight_stage(AP_Vehicle::FixedWing::FlightStage fs)
{
    if (fs == flight_stage) {
        return;
    }

    landing.handle_flight_stage_change(fs == AP_Vehicle::FixedWing::FLIGHT_LAND);

    if (fs == AP_Vehicle::FixedWing::FLIGHT_ABORT_LAND) {
        gcs().send_text(MAV_SEVERITY_NOTICE, "Landing aborted, climbing to %dm",
                        int(auto_state.takeoff_altitude_rel_cm/100));
    }

    flight_stage = fs;
    Log_Write_Status();
}

void Plane::update_alt()
{
    barometer.update();

#if HAL_QUADPLANE_ENABLED
    if (quadplane.available()) {
        quadplane.motors->set_air_density_ratio(barometer.get_air_density_ratio());
    }
#endif

    // calculate the sink rate.
    float sink_rate;
    Vector3f vel;
    if (ahrs.get_velocity_NED(vel)) {
        sink_rate = vel.z;
    } else if (gps.status() >= AP_GPS::GPS_OK_FIX_3D && gps.have_vertical_velocity()) {
        sink_rate = gps.velocity().z;
    } else {
        sink_rate = -barometer.get_climb_rate();        
    }

    // low pass the sink rate to take some of the noise out
    auto_state.sink_rate = 0.8f * auto_state.sink_rate + 0.2f*sink_rate;
#if PARACHUTE == ENABLED
    parachute.set_sink_rate(auto_state.sink_rate);
#endif

    update_flight_stage();

    if (control_mode->does_auto_throttle() && !throttle_suppressed) {

        float distance_beyond_land_wp = 0;
        if (flight_stage == AP_Vehicle::FixedWing::FLIGHT_LAND && current_loc.past_interval_finish_line(prev_WP_loc, next_WP_loc)) {
            distance_beyond_land_wp = current_loc.get_distance(next_WP_loc);
        }

        float target_alt = relative_target_altitude_cm();

        if (control_mode == &mode_rtl && !rtl.done_climb && (g2.rtl_climb_min > 0 || (plane.g2.flight_options & FlightOptions::CLIMB_BEFORE_TURN))) {
            // ensure we do the initial climb in RTL. We add an extra
            // 10m in the demanded height to push TECS to climb
            // quickly
            target_alt = MAX(target_alt, prev_WP_loc.alt - home.alt) + (g2.rtl_climb_min+10)*100;
        }

        SpdHgt_Controller->update_pitch_throttle(target_alt,
                                                 target_airspeed_cm,
                                                 flight_stage,
                                                 distance_beyond_land_wp,
                                                 get_takeoff_pitch_min_cd(),
                                                 throttle_nudge,
                                                 tecs_hgt_afe(),
                                                 aerodynamic_load_factor);
    }
}

/*
  recalculate the flight_stage
 */
void Plane::update_flight_stage(void)
{
    // Update the speed & height controller states
    if (control_mode->does_auto_throttle() && !throttle_suppressed) {
        if (control_mode == &mode_auto) {
#if HAL_QUADPLANE_ENABLED
            if (quadplane.in_vtol_auto()) {
                set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_VTOL);
                return;
            }
#endif
            if (auto_state.takeoff_complete == false) {
                set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_TAKEOFF);
            } else if (mission.get_current_nav_cmd().id == MAV_CMD_NAV_LAND) {
                if (landing.is_commanded_go_around() || flight_stage == AP_Vehicle::FixedWing::FLIGHT_ABORT_LAND) {
                    // abort mode is sticky, it must complete while executing NAV_LAND
                    set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_ABORT_LAND);
                } else if (landing.get_abort_throttle_enable() && get_throttle_input() >= 90 &&
                           landing.request_go_around()) {
                    gcs().send_text(MAV_SEVERITY_INFO,"Landing aborted via throttle");
                    set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_ABORT_LAND);
                } else {
                    set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_LAND);
                }
                return;
            }
#if HAL_QUADPLANE_ENABLED
            if (quadplane.in_assisted_flight()) {
                set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_VTOL);
                return;
            }
#endif
            set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_NORMAL);
        } else if (control_mode != &mode_takeoff) {
            // If not in AUTO then assume normal operation for normal TECS operation.
            // This prevents TECS from being stuck in the wrong stage if you switch from
            // AUTO to, say, FBWB during a landing, an aborted landing or takeoff.
            set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_NORMAL);
        }
        return;
    }
#if HAL_QUADPLANE_ENABLED
    if (quadplane.in_vtol_mode() ||
        quadplane.in_assisted_flight()) {
        set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_VTOL);
        return;
    }
#endif
    set_flight_stage(AP_Vehicle::FixedWing::FLIGHT_NORMAL);
}




/*
    If land_DisarmDelay is enabled (non-zero), check for a landing then auto-disarm after time expires

    only called from AP_Landing, when the landing library is ready to disarm
 */
void Plane::disarm_if_autoland_complete()
{
    if (landing.get_disarm_delay() > 0 &&
        !is_flying() &&
        arming.arming_required() != AP_Arming::Required::NO &&
        arming.is_armed()) {
        /* we have auto disarm enabled. See if enough time has passed */
        if (millis() - auto_state.last_flying_ms >= landing.get_disarm_delay()*1000UL) {
            if (arming.disarm(AP_Arming::Method::AUTOLANDED)) {
                gcs().send_text(MAV_SEVERITY_INFO,"Auto disarmed");
            }
        }
    }
}



/*
  the height above field elevation that we pass to TECS
 */
float Plane::tecs_hgt_afe(void)
{
    /*
      pass the height above field elevation as the height above
      the ground when in landing, which means that TECS gets the
      rangefinder information and thus can know when the flare is
      coming.
    */
    float hgt_afe;
    if (flight_stage == AP_Vehicle::FixedWing::FLIGHT_LAND) {
        hgt_afe = height_above_target();
        hgt_afe -= rangefinder_correction();
    } else {
        // when in normal flight we pass the hgt_afe as relative
        // altitude to home
        hgt_afe = relative_altitude;
    }
    return hgt_afe;
}

// vehicle specific waypoint info helpers
bool Plane::get_wp_distance_m(float &distance) const
{
    // see GCS_MAVLINK_Plane::send_nav_controller_output()
    if (control_mode == &mode_manual) {
        return false;
    }
#if HAL_QUADPLANE_ENABLED
    if (quadplane.in_vtol_mode()) {
        distance = quadplane.using_wp_nav() ? quadplane.wp_nav->get_wp_distance_to_destination() * 0.01 : 0;
        return true;
    }
#endif
    distance = auto_state.wp_distance;
    return true;
}

bool Plane::get_wp_bearing_deg(float &bearing) const
{
    // see GCS_MAVLINK_Plane::send_nav_controller_output()
    if (control_mode == &mode_manual) {
        return false;
    }
#if HAL_QUADPLANE_ENABLED
    if (quadplane.in_vtol_mode()) {
        bearing = quadplane.using_wp_nav() ? quadplane.wp_nav->get_wp_bearing_to_destination() : 0;
        return true;
    }
#endif
    bearing = nav_controller->target_bearing_cd() * 0.01;
    return true;
}

bool Plane::get_wp_crosstrack_error_m(float &xtrack_error) const
{
    // see GCS_MAVLINK_Plane::send_nav_controller_output()
    if (control_mode == &mode_manual) {
        return false;
    }
#if HAL_QUADPLANE_ENABLED
    if (quadplane.in_vtol_mode()) {
        xtrack_error = quadplane.using_wp_nav() ? quadplane.wp_nav->crosstrack_error() : 0;
        return true;
    }
#endif
    xtrack_error = nav_controller->crosstrack_error();
    return true;
}

#ifdef ENABLE_SCRIPTING
// set target location (for use by scripting)
bool Plane::set_target_location(const Location& target_loc)
{
    if (plane.control_mode != &plane.mode_guided) {
        // only accept position updates when in GUIDED mode
        return false;
    }
    plane.guided_WP_loc = target_loc;
    // add home alt if needed
    if (plane.guided_WP_loc.relative_alt) {
        plane.guided_WP_loc.alt += plane.home.alt;
        plane.guided_WP_loc.relative_alt = 0;
    }
    plane.set_guided_WP();
    return true;
}

// set target location (for use by scripting)
bool Plane::get_target_location(Location& target_loc)
{
    switch (control_mode->mode_number()) {
    case Mode::Number::RTL:
    case Mode::Number::AVOID_ADSB:
    case Mode::Number::GUIDED:
    case Mode::Number::AUTO:
    case Mode::Number::LOITER:
#if HAL_QUADPLANE_ENABLED
    case Mode::Number::QLOITER:
    case Mode::Number::QLAND:
    case Mode::Number::QRTL:
#endif
        target_loc = next_WP_loc;
        return true;
        break;
    default:
        break;
    }
    return false;
}
#endif // ENABLE_SCRIPTING

#if OSD_ENABLED
// correct AHRS pitch for TRIM_PITCH_CD in non-VTOL modes, and return VTOL view in VTOL
void Plane::get_osd_roll_pitch_rad(float &roll, float &pitch) const
{
   pitch = ahrs.pitch;
   roll = ahrs.roll;
#if HAL_QUADPLANE_ENABLED
   if (quadplane.show_vtol_view()) {
       return;
   }
#endif
   if (!(g2.flight_options & FlightOptions::OSD_REMOVE_TRIM_PITCH_CD)) {  // correct for TRIM_PITCH_CD
      pitch -= g.pitch_trim_cd * 0.01 * DEG_TO_RAD;
      return;
   }
#if HAL_QUADPLANE_ENABLED
   pitch = quadplane.ahrs_view->pitch;
   roll = quadplane.ahrs_view->roll;
#endif
}
#endif

AP_HAL_MAIN_CALLBACKS(&plane);