diff --git a/Marlin/src/HAL/STM32F1/HAL.cpp b/Marlin/src/HAL/STM32F1/HAL.cpp index dcfdc88555bb..0a334c70554a 100644 --- a/Marlin/src/HAL/STM32F1/HAL.cpp +++ b/Marlin/src/HAL/STM32F1/HAL.cpp @@ -280,7 +280,94 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) { TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial()); +#ifdef OVERCLOCK + +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_PLLMul_9 ((uint32_t)0x001C0000) // 72 MHz +#define RCC_PLLMul_10 ((uint32_t)0x00200000) // 80 MHz +#define RCC_PLLMul_12 ((uint32_t)0x00280000) // 96 MHz +#define RCC_PLLMul_13 ((uint32_t)0x002C0000) // 104MHz +#define RCC_PLLMul_14 ((uint32_t)0x00300000) // 112MHz +#define RCC_PLLMul_16 ((uint32_t)0x00380000) // 128MHz +#define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define FLASH_Latency_2 ((uint32_t)0x00000002) +#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) + +extern "C" { + void RCC_DeInit(void); + void RCC_HSEConfig(uint32_t RCC_HSE); + void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); + uint8_t RCC_GetSYSCLKSource(void); + void RCC_HCLKConfig(uint32_t RCC_SYSCLK); + void RCC_PCLK1Config(uint32_t RCC_HCLK); + void RCC_PCLK2Config(uint32_t RCC_HCLK); + typedef enum {RESET = 0, SET = !RESET} FlagStatus; + FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); + typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; + void RCC_PLLCmd(FunctionalState NewState); + void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); + typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + ErrorStatus RCC_WaitForHSEStartUp(void); + void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); + void FLASH_SetLatency(uint32_t FLASH_Latency); +} + +/* Overclock the STM32F103, up to 128 MHz */ +static uint32_t overclock_stm32f103() { + // Reset the RCC config. to the default state, + // doesn't modify PCLK, LSI, LSE and RTC clocks + RCC_DeInit(); + + // Enable the External High Speed oscillator + RCC_HSEConfig(RCC_HSE_ON); + ErrorStatus HSEStartUpStatus = RCC_WaitForHSEStartUp(); + if (HSEStartUpStatus == SUCCESS) { + // Enable Prefetch Buffer + FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); + // Flash 2 wait state + FLASH_SetLatency(FLASH_Latency_2); + + // HCLK = SYSCLK + RCC_HCLKConfig(RCC_SYSCLK_Div1); + // PCLK1 = HCLK/2 + RCC_PCLK1Config(RCC_HCLK_Div2); + // PCLK2 = HCLK + RCC_PCLK2Config(RCC_HCLK_Div1); + + uint32_t mul_pll = RCC_PLLMul_9; + switch(OC_TARGET_MHZ) { + case 80: mul_pll = RCC_PLLMul_10; break; + case 96: mul_pll = RCC_PLLMul_12; break; + case 104: mul_pll = RCC_PLLMul_13; break; + case 112: mul_pll = RCC_PLLMul_14; break; + case 128: mul_pll = RCC_PLLMul_16; break; + } + RCC_PLLConfig(RCC_PLLSource_HSE_Div1, mul_pll); + + // Enable main PLL + RCC_PLLCmd(ENABLE); + // Wait till PLL is ready + while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) {;} + // Select PLL as system clock source + RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); + // Wait till PLL is used as system clock source + while(RCC_GetSYSCLKSource() != 0x08) {;} + + return OC_TARGET_MHZ; + } + return OC_BASE_MHZ; +} +#endif // OVERCLOCK + void HAL_init() { + #ifdef OVERCLOCK + overclock_stm32f103(); + #endif NVIC_SetPriorityGrouping(0x3); #if PIN_EXISTS(LED) OUT_WRITE(LED_PIN, LOW); diff --git a/Marlin/src/HAL/STM32F1/HAL.h b/Marlin/src/HAL/STM32F1/HAL.h index b3d8dc9d0b3e..335d2eb92bb3 100644 --- a/Marlin/src/HAL/STM32F1/HAL.h +++ b/Marlin/src/HAL/STM32F1/HAL.h @@ -33,6 +33,18 @@ #include "../shared/math_32bit.h" #include "../shared/HAL_SPI.h" +#ifdef BOARD_F_CPU + #undef F_CPU + #define F_CPU BOARD_F_CPU +#endif + +#ifdef OVERCLOCK + #if F_CPU != (1000000U * OC_TARGET_MHZ) + #undef F_CPU + #define F_CPU (1000000U * OC_TARGET_MHZ) + #endif +#endif + #include "fastio.h" #include "watchdog.h" diff --git a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp index abb348d743c5..549887d7a32d 100644 --- a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp +++ b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp @@ -81,7 +81,11 @@ void spiInit(uint8_t spiRate) { * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2 */ #if SPI_DEVICE == 1 - #define SPI_CLOCK_MAX SPI_CLOCK_DIV4 + #if defined(OVERCLOCK) && OC_TARGET_MHZ > 96 + #define SPI_CLOCK_MAX SPI_CLOCK_DIV8 // SKRmini onboard SD (Fysetc LCD is ok on SPI2) + #else + #define SPI_CLOCK_MAX SPI_CLOCK_DIV4 + #endif #else #define SPI_CLOCK_MAX SPI_CLOCK_DIV2 #endif diff --git a/Marlin/src/HAL/STM32F1/SPD/cmsis_gcc.h b/Marlin/src/HAL/STM32F1/SPD/cmsis_gcc.h new file mode 100644 index 000000000000..cd374afaef6a --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/cmsis_gcc.h @@ -0,0 +1,2085 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.0.4 + * @date 09. April 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ (uint8_t)__builtin_clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Marlin/src/HAL/STM32F1/SPD/core_cm3.h b/Marlin/src/HAL/STM32F1/SPD/core_cm3.h new file mode 100644 index 000000000000..9783ab5e50a5 --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/core_cm3.h @@ -0,0 +1,1932 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 04. June 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_PCS_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_gcc.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Marlin/src/HAL/STM32F1/SPD/stm32f10x.h b/Marlin/src/HAL/STM32F1/SPD/stm32f10x.h new file mode 100644 index 000000000000..ae85a2150d6d --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/stm32f10x.h @@ -0,0 +1,8407 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.6.4 + * @date 22-September-2016 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, + * High density, High density value line, Medium density, + * Medium density Value line, Low density, Low density Value line + * and XL-density devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ + #define STM32F10X_HD /*!< STM32F10X_HD: STM32 High density devices (F103xx) */ + /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices (F100) */ + /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ + /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Low-density value line devices are STM32F100xx microcontrollers where the Flash + memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + #if !defined(__STM32F1__) + #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" + #endif +#endif + +#if !defined (USE_STDPERIPH_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif /* USE_STDPERIPH_DRIVER */ + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_VALUE + #ifdef STM32F10X_CL + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ +#endif /* HSE_STARTUP_TIMEOUT */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief STM32F10x Standard Peripheral Library version number V3.6.4 + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x06) /*!< [23:16] sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F10X_STDPERIPH_VERSION ((__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F10X_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#ifdef STM32F10X_XL + #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ +#else + #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ +#endif /* STM32F10X_XL */ +#define __CM3_REV 0x0200 /*!< Core Revision r2p0 */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + +#ifdef STM32F10X_LD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_LD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_LD_VL */ + +#ifdef STM32F10X_MD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_MD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_MD_VL */ + +#ifdef STM32F10X_HD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_XL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_XL */ + +#ifdef STM32F10X_CL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +//#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT +#define HSE_Value HSE_VALUE +#define HSI_Value HSI_VALUE +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + __IO uint32_t SR; +#endif +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +#ifdef STM32F10X_XL + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +#endif /* STM32F10X_XL */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t RESERVED0; + __IO uint32_t CFGR2; +#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define CEC_BASE (APB1PERIPH_BASE + 0x7800) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) +#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) +#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ +#endif + +#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ + #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ + #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ +#endif /* STM32F10X_XL */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#endif + +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ + #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ +#endif /* STM32F10X_XL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ +#endif + +#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ + #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ + #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ +#endif + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#endif + +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ + #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ +#endif + +#ifdef STM32F10X_HD_VL + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ +#endif /* STM32F10X_XL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ +#endif + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ +#endif + +#ifdef STM32F10X_HD_VL +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ +#endif + +#ifdef STM32F10X_XL +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#endif + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CCR5 register *******************/ +#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/******************* Bit definition for DMA_CCR6 register *******************/ +#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR7 register *******************/ +#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR7_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ +#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ +#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ +#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ +#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ +#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun interrupt enable */ + #define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun interrupt enable */ +#endif + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ +#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ +#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ +#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ +#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ +#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ +#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ +#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ +#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ +#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ +#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ +#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ +#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ +#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ + +#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ + +#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ +#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ + +#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ + +#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ + +#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ +#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ +#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ +#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ +#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ +#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ +#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ +#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ +#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ +#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ +#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ +#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ +#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ +#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ +#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ +#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ +#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ + +#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ +#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CRH register ********************/ +#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ +#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ +#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CRL register ********************/ +#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ +#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ +#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ +#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ +#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ +#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ + +/******************* Bit definition for RTC_PRLH register *******************/ +#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ + +/******************* Bit definition for RTC_ALRH register *******************/ +#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ + +/******************* Bit definition for RTC_ALRL register *******************/ +#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Flexible Static Memory Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for FSMC_BCR1 register *******************/ +#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR2 register *******************/ +#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR3 register *******************/ +#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ +#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR4 register *******************/ +#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BTR1 register ******************/ +#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BTR1_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BTR1_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BTR1_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BTR1_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR2 register *******************/ +#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BTR2_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BTR2_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BTR2_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BTR2_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/******************* Bit definition for FSMC_BTR3 register *******************/ +#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BTR3_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BTR3_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BTR3_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BTR3_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR4 register *******************/ +#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BTR4_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BTR4_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BTR4_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BTR4_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR1 register ******************/ +#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BWTR1_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BWTR1_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BWTR1_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BWTR1_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR2 register ******************/ +#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BWTR2_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BWTR2_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BWTR2_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BWTR2_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ +#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR3 register ******************/ +#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BWTR3_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BWTR3_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BWTR3_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BWTR3_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR4 register ******************/ +#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_BWTR4_DATAST_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_BWTR4_DATAST_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_BWTR4_DATAST_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_BWTR4_DATAST_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_PCR2 register *******************/ +#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ +#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR3 register *******************/ +#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR4 register *******************/ +#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/******************* Bit definition for FSMC_SR2 register *******************/ +#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR3 register *******************/ +#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR4 register *******************/ +#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/****************** Bit definition for FSMC_PMEM2 register ******************/ +#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ +#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ +#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ +#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ +#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM3 register ******************/ +#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ +#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ +#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ +#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ +#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM4 register ******************/ +#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ +#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ +#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ +#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ +#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT2 register ******************/ +#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ +#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ +#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ +#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ +#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT3 register ******************/ +#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ +#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ +#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ +#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ +#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT4 register ******************/ +#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ +#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ +#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ +#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ +#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PIO4 register *******************/ +#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ +#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ +#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ +#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ +#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_ECCR2 register ******************/ +#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/****************** Bit definition for FSMC_ECCR3 register ******************/ +#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/******************************************************************************/ +/* */ +/* SD host Interface */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for SDIO_POWER register ******************/ +#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ +#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ + +/****************** Bit definition for SDIO_CLKCR register ******************/ +#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ +#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ +#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ +#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ + +#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ +#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ +#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ + +#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ +#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ + +/******************* Bit definition for SDIO_ARG register *******************/ +#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ + +/******************* Bit definition for SDIO_CMD register *******************/ +#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ + +#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ +#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ +#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ + +#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ +#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ +#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ +#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ +#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ +#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ +#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ + +/***************** Bit definition for SDIO_RESPCMD register *****************/ +#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ + +/****************** Bit definition for SDIO_RESP0 register ******************/ +#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP1 register ******************/ +#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP2 register ******************/ +#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP3 register ******************/ +#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP4 register ******************/ +#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_DTIMER register *****************/ +#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ + +/****************** Bit definition for SDIO_DLEN register *******************/ +#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ + +/****************** Bit definition for SDIO_DCTRL register ******************/ +#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ +#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ +#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ +#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ + +#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ +#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ +#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ +#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ +#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ + +/****************** Bit definition for SDIO_DCOUNT register *****************/ +#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ + +/****************** Bit definition for SDIO_STA register ********************/ +#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ +#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ +#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ +#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ +#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ +#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ +#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ +#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ +#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ +#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ +#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ +#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ +#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ +#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ +#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ +#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ +#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ +#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ +#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ +#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ +#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ +#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ +#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ +#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ + +/******************* Bit definition for SDIO_ICR register *******************/ +#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ +#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ +#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ +#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ +#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ +#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ +#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ +#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ +#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ +#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ +#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ +#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ +#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ + +/****************** Bit definition for SDIO_MASK register *******************/ +#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ +#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ +#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ +#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ +#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ +#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ +#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ +#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ +#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ +#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ +#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ +#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ +#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ +#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ +#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ +#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ +#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ +#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ +#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ +#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ +#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ +#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ + +/***************** Bit definition for SDIO_FIFOCNT register *****************/ +#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ + +/****************** Bit definition for SDIO_FIFO register *******************/ +#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ + +/******************************************************************************/ +/* */ +/* USB Device FS */ +/* */ +/******************************************************************************/ + +/*!< Endpoint-specific registers */ +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/*!< Common registers */ +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ +#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ +#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ +#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ +#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ +#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ +#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ +#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ +#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ +#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ +#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ +#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ +#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ +#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ +#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ +#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ +#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ +#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ +#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ + +/*!< CAN control and status registers */ +/******************* Bit definition for CAN_MCR register ********************/ +#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ +#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ +#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ +#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ +#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ +#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ +#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ +#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ +#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ + +/******************* Bit definition for CAN_MSR register ********************/ +#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ +#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ +#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ +#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ +#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ +#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ +#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ +#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ +#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ + +/******************* Bit definition for CAN_TSR register ********************/ +#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ +#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ +#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ +#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ +#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ +#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ +#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ +#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ +#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ +#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ +#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ +#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ + +#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ +#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ + +#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ +#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RF0R register *******************/ +#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ +#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ +#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ +#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RF1R register *******************/ +#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ +#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ +#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ +#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_IER register *******************/ +#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ +#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ESR register *******************/ +#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ +#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ +#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ + +#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ +#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ + +/******************* Bit definition for CAN_BTR register ********************/ +#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ +#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ +#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ +#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ +#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ +#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ + +/*!< Mailbox registers */ +/****************** Bit definition for CAN_TI0R register ********************/ +#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TDT0R register *******************/ +#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/****************** Bit definition for CAN_TDL0R register *******************/ +#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/****************** Bit definition for CAN_TDH0R register *******************/ +#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI1R register *******************/ +#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT1R register ******************/ +#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL1R register ******************/ +#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH1R register ******************/ +#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI2R register *******************/ +#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT2R register ******************/ +#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL2R register ******************/ +#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH2R register ******************/ +#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI0R register *******************/ +#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT0R register ******************/ +#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL0R register ******************/ +#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH0R register ******************/ +#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI1R register *******************/ +#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT1R register ******************/ +#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL1R register ******************/ +#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH1R register ******************/ +#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/*!< CAN filter registers */ +/******************* Bit definition for CAN_FMR register ********************/ +#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ + +/******************* Bit definition for CAN_FM1R register *******************/ +#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ +#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ +#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ +#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ +#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ +#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ +#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ +#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ +#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ +#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ +#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ +#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ +#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ +#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ +#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FS1R register *******************/ +#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ +#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ +#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ +#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ +#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ +#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ +#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ +#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ +#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ +#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ +#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ +#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ +#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ +#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ +#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FFA1R register *******************/ +#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ +#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ +#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ +#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ +#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ +#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ +#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ +#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ +#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ +#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ +#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ +#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ +#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ +#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ +#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FA1R register *******************/ +#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ +#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ +#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ +#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ +#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ +#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ +#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ +#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ +#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ +#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ +#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ +#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ +#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ +#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ +#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ +#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ +#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ +#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ +#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ +#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ +#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ +#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ +#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ + +/******************************************************************************/ +/* */ +/* FLASH and Option Bytes Registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint8_t)0x07) /*!< LATENCY[2:0] bits (Latency) */ +#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ + +#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ +#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ + +/****************** FLASH Keys **********************************************/ +#define RDP_Key ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/***************** Bit definition for FLASH_OPTKEYR register ****************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ +#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ +#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ +#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ + +/******************* Bit definition for FLASH_CR register *******************/ +#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ +#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ +#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ +#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ +#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ +#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ +#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ +#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ +#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ +#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ + +/******************* Bit definition for FLASH_AR register *******************/ +#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for FLASH_RDP register *******************/ +#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ +#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRP0 register ******************/ +#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP1 register ******************/ +#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP2 register ******************/ +#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP3 register ******************/ +#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +#ifdef STM32F10X_CL +/******************************************************************************/ +/* Ethernet MAC Registers bits definitions */ +/******************************************************************************/ +/* Bit definition for Ethernet MAC Control Register register */ +#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ +#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ +#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ + #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ + #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ + #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ + #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ + #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ + #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ + #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ + #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ +#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ +#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ +#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ +#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ +#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ +#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ +#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ +#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ +#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling + a transmission attempt during retries after a collision: 0 =< r <2^k */ + #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ + #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ + #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ + #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ +#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ +#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ +#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ + +/* Bit definition for Ethernet MAC Frame Filter Register */ +#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ +#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ +#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ +#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ +#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ + #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ + #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ + #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ +#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ +#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ +#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ +#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ +#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ +#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ + +/* Bit definition for Ethernet MAC Hash Table High Register */ +#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ + +/* Bit definition for Ethernet MAC Hash Table Low Register */ +#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ + +/* Bit definition for Ethernet MAC MII Address Register */ +#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ +#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ +#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ + #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ + #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ + #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ +#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ +#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ + +/* Bit definition for Ethernet MAC MII Data Register */ +#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ + +/* Bit definition for Ethernet MAC Flow Control Register */ +#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ +#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ +#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ + #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ + #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ + #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ + #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ +#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ +#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ +#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ +#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ + +/* Bit definition for Ethernet MAC VLAN Tag Register */ +#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ +#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ + +/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ +#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ +/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. + Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ +/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask + Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask + Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask + Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask + Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - + RSVD - Filter1 Command - RSVD - Filter0 Command + Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset + Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 + Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ + +/* Bit definition for Ethernet MAC PMT Control and Status Register */ +#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ +#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ +#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ +#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ +#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ +#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ +#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ + +/* Bit definition for Ethernet MAC Status Register */ +#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ +#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ +#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ +#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ +#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ + +/* Bit definition for Ethernet MAC Interrupt Mask Register */ +#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ +#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ + +/* Bit definition for Ethernet MAC Address0 High Register */ +#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ + +/* Bit definition for Ethernet MAC Address0 Low Register */ +#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ + +/* Bit definition for Ethernet MAC Address1 High Register */ +#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ + #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ +#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address1 Low Register */ +#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ + +/* Bit definition for Ethernet MAC Address2 High Register */ +#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address2 Low Register */ +#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ + +/* Bit definition for Ethernet MAC Address3 High Register */ +#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ + +/* Bit definition for Ethernet MAC Address3 Low Register */ +#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ + +/******************************************************************************/ +/* Ethernet MMC Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet MMC Contol Register */ +#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ +#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ +#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ +#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ + +/* Bit definition for Ethernet MMC Receive Interrupt Register */ +#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Register */ +#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ +#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ +#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ +#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ +#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ +#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ + +/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ +#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ + +/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ +#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ + +/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ +#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ + +/******************************************************************************/ +/* Ethernet PTP Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet PTP Time Stamp Contol Register */ +#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ +#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ +#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ +#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ +#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ +#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ + +/* Bit definition for Ethernet PTP Sub-Second Increment Register */ +#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ + +/* Bit definition for Ethernet PTP Time Stamp High Register */ +#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ + +/* Bit definition for Ethernet PTP Time Stamp Low Register */ +#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ +#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp High Update Register */ +#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ +#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ +#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Addend Register */ +#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ + +/* Bit definition for Ethernet PTP Target Time High Register */ +#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ + +/* Bit definition for Ethernet PTP Target Time Low Register */ +#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ + +/******************************************************************************/ +/* Ethernet DMA Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet DMA Bus Mode Register */ +#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ +#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ +#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ +#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ + #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ + #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ + #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ + #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ +#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ +#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ +#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ + #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ + #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ + #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ + #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ +#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ +#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ +#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ + +/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ +#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ + +/* Bit definition for Ethernet DMA Receive Poll Demand Register */ +#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ + +/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ +#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ + +/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ +#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ + +/* Bit definition for Ethernet DMA Status Register */ +#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ +#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ +#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ +#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ + /* combination with EBS[2:0] for GetFlagStatus function */ + #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ + #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ + #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ +#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ + #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ + #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ + #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ + #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ + #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ + #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ +#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ + #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ + #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ + #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ + #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ + #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ + #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ +#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ +#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ +#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ +#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ +#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ +#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ +#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ +#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ +#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ +#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ +#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ +#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ +#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ +#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ +#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ + +/* Bit definition for Ethernet DMA Operation Mode Register */ +#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ +#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ +#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ +#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ +#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ +#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ + #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ + #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ + #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ + #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ + #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ + #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ + #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ + #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ +#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ +#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ +#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ +#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ + #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ + #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ + #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ + #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ +#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ +#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ + +/* Bit definition for Ethernet DMA Interrupt Enable Register */ +#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ +#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ +#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ +#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ +#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ +#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ +#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ +#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ +#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ +#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ +#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ +#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ +#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ +#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ +#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ + +/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ +#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ +#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ +#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ +#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ + +/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ +#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ +#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ +#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ +#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ +#endif /* STM32F10X_CL */ + +/** + * @} + */ + + /** + * @} + */ + +#ifdef USE_STDPERIPH_DRIVER + #include "stm32f10x_conf.h" +#endif + +/** @addtogroup Exported_macro + * @{ + */ + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32F10x_H */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.c b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.c new file mode 100644 index 000000000000..33ec1f7c9fd3 --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.c @@ -0,0 +1,1706 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.c + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file provides all the FLASH firmware functions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ +#if defined(__STM32F1__) && defined(OVERCLOCK) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_flash.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/** @defgroup FLASH_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Defines + * @{ + */ + +/* Flash Access Control Register bits */ +#define ACR_LATENCY_Mask ((uint32_t)0x00000038) +#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) +#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) + +/* Flash Access Control Register bits */ +#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) + +/* Flash Control Register bits */ +#define CR_PG_Set ((uint32_t)0x00000001) +#define CR_PG_Reset ((uint32_t)0x00001FFE) +#define CR_PER_Set ((uint32_t)0x00000002) +#define CR_PER_Reset ((uint32_t)0x00001FFD) +#define CR_MER_Set ((uint32_t)0x00000004) +#define CR_MER_Reset ((uint32_t)0x00001FFB) +#define CR_OPTPG_Set ((uint32_t)0x00000010) +#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) +#define CR_OPTER_Set ((uint32_t)0x00000020) +#define CR_OPTER_Reset ((uint32_t)0x00001FDF) +#define CR_STRT_Set ((uint32_t)0x00000040) +#define CR_LOCK_Set ((uint32_t)0x00000080) + +/* FLASH Mask */ +#define RDPRT_Mask ((uint32_t)0x00000002) +#define WRP0_Mask ((uint32_t)0x000000FF) +#define WRP1_Mask ((uint32_t)0x0000FF00) +#define WRP2_Mask ((uint32_t)0x00FF0000) +#define WRP3_Mask ((uint32_t)0xFF000000) +#define OB_USER_BFB2 ((uint16_t)0x0008) + +/* FLASH BANK address */ +#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x000B0000) +#define ProgramTimeout ((uint32_t)0x00002000) +/** + * @} + */ + +/** @defgroup FLASH_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +#ifdef ARDUINO_ARCH_STM32F1 +static FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); +#endif + +/** +@code + + This driver provides functions to configure and program the Flash memory of all STM32F10x devices, + including the latest STM32F10x_XL density devices. + + STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability: + - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each) + - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each) + While other STM32F10x devices features only one bank with memory up to 512 Kbytes. + + In version V3.3.0, some functions were updated and new ones were added to support + STM32F10x_XL devices. Thus some functions manages all devices, while other are + dedicated for XL devices only. + + The table below presents the list of available functions depending on the used STM32F10x devices. + + *************************************************** + * Legacy functions used for all STM32F10x devices * + *************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_SetLatency | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_HalfCycleAccessCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_PrefetchBufferCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. | + | | | | - For other devices: unlock Bank1 and it is equivalent | + | | | | to FLASH_UnlockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. | + | | | | - For other devices: lock Bank1 and it is equivalent | + | | | | to FLASH_LockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 | + | | | | - For other devices: erase a page in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 | + | | | | - For other devices: erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseOptionBytes | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramOptionByteData | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EnableWriteProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ReadOutProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_UserOptionByteConfig | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetUserOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts| + | | | | - For other devices: enable Bank1's interrupts | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status| + | | | | - For other devices: return Bank1's flag status | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag | + | | | | - For other devices: clear Bank1's flag | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) | + | | | | equivalent to FLASH_GetBank1Status function | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) | + | | | | equivalent to: FLASH_WaitForLastBank1Operation function | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ************************************************************************************************************************ + * New functions used for all STM32F10x devices to manage Bank1: * + * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 * + * - For other devices, these functions are optional (covered by functions listed above) * + ************************************************************************************************************************ + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ***************************************************************************** + * New Functions used only with STM32F10x_XL density devices to manage Bank2 * + ***************************************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank2 | Yes | No | - Lock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 | + +----------------------------------------------------------------------------------------------------------------------------------+ +@endcode +*/ + + +/** + * @brief Sets the code latency value. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @arg FLASH_Latency_2: FLASH Two Latency cycles + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Read the ACR register */ + tmpreg = FLASH->ACR; + + /* Sets the Latency value */ + tmpreg &= ACR_LATENCY_Mask; + tmpreg |= FLASH_Latency; + + /* Write the ACR register */ + FLASH->ACR = tmpreg; +} + +/** + * @brief Enables or disables the Half cycle flash access. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. + * This parameter can be one of the following values: + * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable + * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable + * @retval None + */ +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) +{ + /* Check the parameters */ + assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); + + /* Enable or disable the Half cycle access */ + FLASH->ACR &= ACR_HLFCYA_Mask; + FLASH->ACR |= FLASH_HalfCycleAccess; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. + * This parameter can be one of the following values: + * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable + * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable + * @retval None + */ +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); + + /* Enable or disable the Prefetch Buffer */ + FLASH->ACR &= ACR_PRFTBE_Mask; + FLASH->ACR |= FLASH_PrefetchBuffer; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2. + * - For all other devices it unlocks Bank1 and it is equivalent + * to FLASH_UnlockBank1 function.. + * @param None + * @retval None + */ +#ifndef ARDUINO_ARCH_STM32F1 +void FLASH_Unlock(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + +#ifdef STM32F10X_XL + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; +#endif /* STM32F10X_XL */ +} +#endif + +/** + * @brief Unlocks the FLASH Bank1 Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1. + * - For all other devices it unlocks Bank1 and it is + * equivalent to FLASH_Unlock function. + * @param None + * @retval None + */ +void FLASH_UnlockBank1(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +#ifdef STM32F10X_XL +/** + * @brief Unlocks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_UnlockBank2(void) +{ + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Locks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1 and Bank2. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_LockBank1 function. + * @param None + * @retval None + */ +#ifndef ARDUINO_ARCH_STM32F1 +void FLASH_Lock(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; + +#ifdef STM32F10X_XL + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +#endif /* STM32F10X_XL */ +} +#endif + +/** + * @brief Locks the FLASH Bank1 Program Erase Controller. + * @note this function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_Lock function. + * @param None + * @retval None + */ +void FLASH_LockBank1(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; +} + +#ifdef STM32F10X_XL +/** + * @brief Locks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_LockBank2(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases a specified FLASH page. + * @note This function can be used for all STM32F10x devices. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +#ifndef ARDUINO_ARCH_STM32F1 +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Page_Address)); + +#ifdef STM32F10X_XL + if(Page_Address < FLASH_BANK1_END_ADDRESS) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR2|= CR_PER_Set; + FLASH->AR2 = Page_Address; + FLASH->CR2|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR2 &= CR_PER_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} +#endif + +/** + * @brief Erases all FLASH pages. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all Bank1 FLASH pages. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function erases all Bank1 pages. + * - For all other devices it erases all Bank1 pages and it is equivalent + * to FLASH_EraseAllPages function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank1Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Erases all Bank2 FLASH pages. + * @note This function can be used only for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank2Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseOptionBytes(void) +{ + uint16_t rdptmp = RDP_Key; + + FLASH_Status status = FLASH_COMPLETE; + + /* Get the actual read protection Option Byte value */ + if(FLASH_GetReadOutProtectionStatus() != RESET) + { + rdptmp = 0x00; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* if the previous operation is completed, proceed to erase the option bytes */ + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + /* Restore the last read protection Option Byte value */ + OB->RDP = (uint16_t)rdptmp; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if (status != FLASH_TIMEOUT) + { + /* Disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + } + /* Return the erase status */ + return status; +} + +/** + * @brief Programs a word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + if(Address < FLASH_BANK1_END_ADDRESS - 2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + } + else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + FLASH->CR2 |= CR_PG_Set; + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +#ifndef ARDUINO_ARCH_STM32F1 +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(Address < FLASH_BANK1_END_ADDRESS) + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + else + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} +#endif + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + /* Enables the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Write protects the desired pages + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Pages: specifies the address of the pages to be write protected. + * This parameter can be: + * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 + * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 + * and FLASH_WRProt_Pages124to127 + * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 + * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 + * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511 + * @arg FLASH_WRProt_AllPages + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); + + FLASH_Pages = (uint32_t)(~FLASH_Pages); + WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); + WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); + WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); + WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTPG_Set; + if(WRP0_Data != 0xFF) + { + OB->WRP0 = WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) + { + OB->WRP1 = WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) + { + OB->WRP2 = WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) + { + OB->WRP3 = WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the write protection operation Status */ + return status; +} + +/** + * @brief Enables or disables the read out protection. + * @note If the user has already programmed the other option bytes before calling + * this function, he must re-program them since this function erases all option bytes. + * @note This function can be used for all STM32F10x devices. + * @param Newstate: new state of the ReadOut Protection. + * This parameter can be: ENABLE or DISABLE. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + if(NewState != DISABLE) + { + OB->RDP = 0x00; + } + else + { + OB->RDP = RDP_Key; + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + /* Disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + } + } + } + /* Return the protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @note This function can be used for all STM32F10x devices. + * @param OB_IWDG: Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Configures to boot from Bank1 or Bank2. + * @note This function can be used only for STM32F10x_XL density devices. + * @param FLASH_BOOT: select the FLASH Bank to boot from. + * This parameter can be one of the following values: + * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank1(Default). + * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank2 or Bank1, + * depending on the activation of the bank. The active banks are checked in + * the following order: Bank2, followed by Bank1. + * The active bank is recognized by the value programmed at the base address + * of the respective bank (corresponding to the initial stack pointer value + * in the interrupt vector table). + * For more information, please refer to AN2606 from www.st.com. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) +{ + FLASH_Status status = FLASH_COMPLETE; + assert_param(IS_FLASH_BOOT(FLASH_BOOT)); + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + if(FLASH_BOOT == FLASH_BOOT_Bank1) + { + OB->USER |= OB_USER_BFB2; + } + else + { + OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Returns the FLASH User Option Bytes values. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint32_t FLASH_GetUserOptionByte(void) +{ + /* Return the User Option Byte */ + return (uint32_t)(FLASH->OBR >> 2); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes Register value. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH Write Protection Option Bytes Register value + */ +uint32_t FLASH_GetWriteProtectionOptionByte(void) +{ + /* Return the Flash write protection Register value */ + return (uint32_t)(FLASH->WRPR); +} + +/** + * @brief Checks whether the FLASH Read Out Protection Status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_GetReadOutProtectionStatus(void) +{ + FlagStatus readoutstatus = RESET; + if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) + { + readoutstatus = SET; + } + else + { + readoutstatus = RESET; + } + return readoutstatus; +} + +/** + * @brief Checks whether the FLASH Prefetch Buffer status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Prefetch Buffer Status (SET or RESET). + */ +FlagStatus FLASH_GetPrefetchBufferStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts + for Bank1 and Bank2. + * - For other devices it enables or disables the specified FLASH interrupts for Bank1. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_ERROR: FLASH Error Interrupt + * @arg FLASH_IT_EOP: FLASH end of operation Interrupt + * @param NewState: new state of the specified Flash interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((FLASH_IT & 0x80000000) != 0x0) + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF); + } + else + { + /* Disable the interrupt sources */ + FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF); + } + } + else + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +#endif /* STM32F10X_XL */ +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function checks whether the specified + * Bank1 or Bank2 flag is set or not. + * - For other devices, it checks whether the specified Bank1 flag is + * set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH Busy flag + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH_FLAG & 0x80000000) != 0x0) + { + if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } +#endif /* STM32F10X_XL */ + + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags + * - For other devices, it clears Bank1’s pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + if((FLASH_FLAG & 0x80000000) != 0x0) + { + /* Clear the flags */ + FLASH->SR2 = FLASH_FLAG; + } + else + { + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; + } + +#else + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Returns the FLASH Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetBank1Status function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +#ifndef ARDUINO_ARCH_STM32F1 +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} +#endif + +/** + * @brief Returns the FLASH Bank1 Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetStatus function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank1Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +#ifdef STM32F10X_XL +/** + * @brief Returns the FLASH Bank2 Status. + * @note This function can be used for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank2Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastBank1Operation. + * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation + * to complete or a TIMEOUT to occur. + * - For all other devices it waits for a Flash operation to complete + * or a TIMEOUT to occur. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +#ifdef ARDUINO_ARCH_STM32F1 +static +#endif +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +/** + * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastOperation. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. + * @note This function can be used only for STM32F10x_XL density devices. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank2Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) + { + status = FLASH_GetBank2Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* __STM32F1__ */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.h b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.h new file mode 100644 index 000000000000..e2d3e86d6b7a --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_flash.h @@ -0,0 +1,435 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.h + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FLASH_H +#define __STM32F10x_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @defgroup FLASH_Exported_Types + * @{ + */ + +/** + * @brief FLASH Status (updated with stm32duino flash_stm32.h values) + */ + +typedef enum { + FLASH_BUSY = 1, + FLASH_ERROR_PG, + FLASH_ERROR_WRP, + FLASH_ERROR_OPT, + FLASH_COMPLETE, + FLASH_TIMEOUT, + FLASH_BAD_ADDRESS +} FLASH_Status; + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup Flash_Latency + * @{ + */ + +#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */ +#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */ +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1) || \ + ((LATENCY) == FLASH_Latency_2)) +/** + * @} + */ + +/** @defgroup Half_Cycle_Enable_Disable + * @{ + */ + +#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */ +#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */ +#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ + ((STATE) == FLASH_HalfCycleAccess_Disable)) +/** + * @} + */ + +/** @defgroup Prefetch_Buffer_Enable_Disable + * @{ + */ + +#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */ +#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */ +#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ + ((STATE) == FLASH_PrefetchBuffer_Disable)) +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ + +/* Values to be used with STM32 Low and Medium density devices */ +#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */ +#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */ +#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */ +#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */ +#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */ +#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */ +#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */ +#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */ + +/* Values to be used with STM32 Medium-density devices */ +#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */ +#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */ +#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */ +#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */ +#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */ +#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */ +#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */ +#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */ +#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */ +#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */ +#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */ +#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */ +#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */ +#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */ +#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */ +#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */ +#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */ +#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */ +#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */ +#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */ +#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */ +#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */ +#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */ +#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */ + +/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */ +#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 0 to 1 */ +#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 2 to 3 */ +#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 4 to 5 */ +#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 6 to 7 */ +#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 8 to 9 */ +#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 10 to 11 */ +#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 12 to 13 */ +#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 14 to 15 */ +#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 16 to 17 */ +#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 18 to 19 */ +#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 20 to 21 */ +#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 22 to 23 */ +#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 24 to 25 */ +#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 26 to 27 */ +#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 28 to 29 */ +#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 30 to 31 */ +#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 32 to 33 */ +#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 34 to 35 */ +#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 36 to 37 */ +#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 38 to 39 */ +#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 40 to 41 */ +#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 42 to 43 */ +#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 44 to 45 */ +#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 46 to 47 */ +#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 48 to 49 */ +#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 50 to 51 */ +#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 52 to 53 */ +#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 54 to 55 */ +#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 56 to 57 */ +#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 58 to 59 */ +#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 60 to 61 */ +#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */ +#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */ +#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */ + +#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ + +#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +#ifdef STM32F10X_XL +/** + * @} + */ +/** @defgroup FLASH_Boot + * @{ + */ +#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ +#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank 2 or Bank 1, + depending on the activation of the bank */ +#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2)) +#endif +/** + * @} + */ +/** @defgroup FLASH_Interrupts + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */ +#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */ + +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#else +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#endif + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */ +#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */ +#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */ +#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)|| \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR)) +#else +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions + * @{ + */ + +/*------------ Functions used for all STM32F10x devices -----*/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess); +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); +#ifndef ARDUINO_ARCH_STM32F1 /* already in maple flash_stm32 */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); +FLASH_Status FLASH_GetStatus(void); +void FLASH_Unlock(void); +void FLASH_Lock(void); +#endif +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_EraseOptionBytes(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages); +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); +uint32_t FLASH_GetUserOptionByte(void); +uint32_t FLASH_GetWriteProtectionOptionByte(void); +FlagStatus FLASH_GetReadOutProtectionStatus(void); +FlagStatus FLASH_GetPrefetchBufferStatus(void); +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); + +/*------------ New function used for all STM32F10x devices -----*/ +void FLASH_UnlockBank1(void); +void FLASH_LockBank1(void); +FLASH_Status FLASH_EraseAllBank1Pages(void); +FLASH_Status FLASH_GetBank1Status(void); +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout); + +#ifdef STM32F10X_XL +/*---- New Functions used only with STM32F10x_XL density devices -----*/ +void FLASH_UnlockBank2(void); +void FLASH_LockBank2(void); +FLASH_Status FLASH_EraseAllBank2Pages(void); +FLASH_Status FLASH_GetBank2Status(void); +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout); +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_FLASH_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.c b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.c new file mode 100644 index 000000000000..7b67b712c71b --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.c @@ -0,0 +1,1471 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.c + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file provides all the RCC firmware functions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ +#if defined(__STM32F1__) && defined(OVERCLOCK) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/** @defgroup RCC_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) + +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) + +#ifdef STM32F10X_CL + /* Alias word address of PLL2ON bit */ + #define PLL2ON_BitNumber 0x1A + #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) + + /* Alias word address of PLL3ON bit */ + #define PLL3ON_BitNumber 0x1C + #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) + +/* --- CFGR Register ---*/ + +/* Alias word address of USBPRE bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x04) + +#ifndef STM32F10X_CL + #define USBPRE_BitNumber 0x16 + #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) +#else + #define OTGFSPRE_BitNumber 0x16 + #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* --- BDCR Register ---*/ + +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x20) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) + +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x24) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) + +#ifdef STM32F10X_CL +/* --- CFGR2 Register ---*/ + + /* Alias word address of I2S2SRC bit */ + #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) + #define I2S2SRC_BitNumber 0x11 + #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) + + /* Alias word address of I2S3SRC bit */ + #define I2S3SRC_BitNumber 0x12 + #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* ---------------------- RCC registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CR_HSEBYP_Set ((uint32_t)0x00040000) +#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CR_HSEON_Set ((uint32_t)0x00010000) +#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +/* CFGR register bit mask */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) +#else + #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) +#endif /* STM32F10X_CL */ + +#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* CSR register bit mask */ +#define CSR_RMVF_Set ((uint32_t)0x01000000) + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/* CFGR2 register bit mask */ + #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) + #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#endif +#ifdef STM32F10X_CL + #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) + #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) + #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) +#endif /* STM32F10X_CL */ + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR register byte 4 (Bits[31:24]) base address */ +#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/** + * @} + */ + +/** @defgroup RCC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Variables + * @{ + */ + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/** + * @} + */ + +/** @defgroup RCC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note HSE can not be stopped if it is used directly or through the PLL as system clock. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: HSE oscillator OFF + * @arg RCC_HSE_ON: HSE oscillator ON + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + /* Reset HSEON bit */ + RCC->CR &= CR_HSEON_Reset; + /* Reset HSEBYP bit */ + RCC->CR &= CR_HSEBYP_Reset; + /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ + switch(RCC_HSE) + { + case RCC_HSE_ON: + /* Set HSEON bit */ + RCC->CR |= CR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + /* Set HSEBYP and HSEON bits */ + RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; + break; + + default: + break; + } +} + +/** + * @brief Waits for HSE start-up. + * @param None + * @retval An ErrorStatus enumuration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + tmpreg = RCC->CR; + /* Clear HSITRIM[4:0] bits */ + tmpreg &= CR_HSITRIM_Mask; + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used directly or through the PLL as system clock. + * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PLLSource: specifies the PLL entry clock source. + * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, + * this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry + * @param RCC_PLLMul: specifies the PLL multiplication factor. + * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} + * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + tmpreg = RCC->CFGR; + /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + tmpreg &= CFGR_PLL_Mask; + /* Set the PLL configuration bits */ + tmpreg |= RCC_PLLSource | RCC_PLLMul; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the PLL. + * @note The PLL can not be disabled if it is used as system clock. + * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/** + * @brief Configures the PREDIV1 division factor. + * @note + * - This function must be used only when the PLL is disabled. + * - This function applies only to STM32 Connectivity line and Value line + * devices. + * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. + * This parameter can be one of the following values: + * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock + * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock + * @note + * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ + tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); + /* Set the PREDIV1 clock source and division factor */ + tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} +#endif + +#ifdef STM32F10X_CL +/** + * @brief Configures the PREDIV2 division factor. + * @note + * - This function must be used only when both PLL2 and PLL3 are disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. + * This parameter can be RCC_PREDIV2_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV2[3:0] bits */ + tmpreg &= ~CFGR2_PREDIV2; + /* Set the PREDIV2 division factor */ + tmpreg |= RCC_PREDIV2_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Configures the PLL2 multiplication factor. + * @note + * - This function must be used only when the PLL2 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. + * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL2Config(uint32_t RCC_PLL2Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL2Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL2MUL; + /* Set the PLL2 configuration bits */ + tmpreg |= RCC_PLL2Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL2. + * @note + * - The PLL2 can not be disabled if it is used indirectly as system clock + * (i.e. it is used as PLL clock entry that is used as System clock). + * - This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL2Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; +} + + +/** + * @brief Configures the PLL3 multiplication factor. + * @note + * - This function must be used only when the PLL3 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. + * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL3Config(uint32_t RCC_PLL3Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL3Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL3MUL; + /* Set the PLL3 configuration bits */ + tmpreg |= RCC_PLL3Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL3. + * @note This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL3Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the system clock (SYSCLK). + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + tmpreg = RCC->CFGR; + /* Clear SW[1:0] bits */ + tmpreg &= CFGR_SW_Mask; + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can + * be one of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + tmpreg = RCC->CFGR; + /* Clear HPRE[3:0] bits */ + tmpreg &= CFGR_HPRE_Reset_Mask; + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE1[2:0] bits */ + tmpreg &= CFGR_PPRE1_Reset_Mask; + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE2[2:0] bits */ + tmpreg &= CFGR_PPRE2_Reset_Mask; + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +#ifndef STM32F10X_CL +/** + * @brief Configures the USB clock (USBCLK). + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB + * clock source + * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); + + *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; +} +#else +/** + * @brief Configures the USB OTG FS clock (OTGFSCLK). + * This function applies only to STM32 Connectivity line devices. + * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. + * This clock is derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @retval None + */ +void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); + + *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the ADC clock (ADCCLK). + * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * This parameter can be one of the following values: + * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 + * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 + * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 + * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); + tmpreg = RCC->CFGR; + /* Clear ADCPRE[1:0] bits */ + tmpreg &= CFGR_ADCPRE_Reset_Mask; + /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ + tmpreg |= RCC_PCLK2; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +#ifdef STM32F10X_CL +/** + * @brief Configures the I2S2 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S2 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry + * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry + * @retval None + */ +void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; +} + +/** + * @brief Configures the I2S3 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S3 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry + * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry + * @retval None + */ +void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: LSE oscillator OFF + * @arg RCC_LSE_ON: LSE oscillator ON + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch(RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Returns the frequencies of different on chip clocks. + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * @note The result of this function could be not correct when using + * fractional value for HSE crystal. + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & CFGR_SWS_Mask; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & CFGR_PLLMull_Mask; + pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; + } + else + { + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; + RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get ADCCLK prescaler */ + tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + /* ADCCLK clock frequency */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @arg RCC_AHBPeriph_ETH_MAC_Tx + * @arg RCC_AHBPeriph_ETH_MAC_Rx + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_FSMC + * @arg RCC_AHBPeriph_SDIO + * + * @note SRAM and FLITF clock can be disabled only during sleep mode. + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +#ifdef STM32F10X_CL +/** + * @brief Forces or releases AHB peripheral reset. + * @note This function applies only to STM32 Connectivity line devices. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} +#endif /* STM32F10X_CL */ + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @param NewState: new state of the Clock Security System.. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO pin. + * @param RCC_MCO: specifies the clock source to output. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * @arg RCC_MCO_PLL2CLK: PLL2 clock selected + * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected + * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected + * @arg RCC_MCO_PLL3CLK: PLL3 clock selected + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCO)); + + /* Perform Byte access to MCO bits to select the MCO source */ + *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_Mask; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= CSR_RMVF_Set; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif // __STM32F1__ && OVERCLOCK + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.h b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.h new file mode 100644 index 000000000000..6a722ec1fa95 --- /dev/null +++ b/Marlin/src/HAL/STM32F1/SPD/stm32f10x_rcc.h @@ -0,0 +1,733 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.h + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the RCC firmware + * library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RCC_H +#define __STM32F10x_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @defgroup RCC_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/** + * @} + */ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup PLL_entry_clock_source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) + #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) + #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div2)) +#else + #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup PLL_multiplication_factor + * @{ + */ +#ifndef STM32F10X_CL + #define RCC_PLLMul_2 ((uint32_t)0x00000000) + #define RCC_PLLMul_3 ((uint32_t)0x00040000) + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_10 ((uint32_t)0x00200000) + #define RCC_PLLMul_11 ((uint32_t)0x00240000) + #define RCC_PLLMul_12 ((uint32_t)0x00280000) + #define RCC_PLLMul_13 ((uint32_t)0x002C0000) + #define RCC_PLLMul_14 ((uint32_t)0x00300000) + #define RCC_PLLMul_15 ((uint32_t)0x00340000) + #define RCC_PLLMul_16 ((uint32_t)0x00380000) + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) + +#else + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) + + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_6_5)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup PREDIV1_division_factor + * @{ + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) + #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) + #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) + #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) + #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) + #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) + #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) + #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) + #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) + #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) + #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) + #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) + #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) + #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) + #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) + + #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +#endif +/** + * @} + */ + + +/** @defgroup PREDIV1_clock_source + * @{ + */ +#ifdef STM32F10X_CL +/* PREDIV1 clock source (for STM32 connectivity line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ + ((SOURCE) == RCC_PREDIV1_Source_PLL2)) +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/* PREDIV1 clock source (for STM32 Value line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) +#endif +/** + * @} + */ + +#ifdef STM32F10X_CL +/** @defgroup PREDIV2_division_factor + * @{ + */ + + #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) + #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) + #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) + #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) + #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) + #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) + #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) + #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) + #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) + #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) + #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) + #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) + #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) + #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) + #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) + + #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ + ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ + ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ + ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ + ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ + ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ + ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ + ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) +/** + * @} + */ + + +/** @defgroup PLL2_multiplication_factor + * @{ + */ + + #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) + #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) + #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) + #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) + #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) + #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) + #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) + #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) + #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) + + #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ + ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ + ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ + ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ + ((MUL) == RCC_PLL2Mul_20)) +/** + * @} + */ + + +/** @defgroup PLL3_multiplication_factor + * @{ + */ + + #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) + #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) + #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) + #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) + #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) + #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) + #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) + #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) + #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) + + #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ + ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ + ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ + ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ + ((MUL) == RCC_PLL3Mul_20)) +/** + * @} + */ + +#endif /* STM32F10X_CL */ + + +/** @defgroup System_clock_source + * @{ + */ + +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup AHB_clock_source + * @{ + */ + +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup APB1_APB2_clock_source + * @{ + */ + +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +#ifndef STM32F10X_CL + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) + #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) +#else + #define RCC_IT_PLL2RDY ((uint8_t)0x20) + #define RCC_IT_PLL3RDY ((uint8_t)0x40) + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) + #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) +#endif /* STM32F10X_CL */ + + +/** + * @} + */ + +#ifndef STM32F10X_CL +/** @defgroup USB_Device_clock_source + * @{ + */ + + #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) + #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) + + #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ + ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) +/** + * @} + */ +#else +/** @defgroup USB_OTG_FS_clock_source + * @{ + */ + #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) + #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) + + #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ + ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +#ifdef STM32F10X_CL +/** @defgroup I2S2_clock_source + * @{ + */ + #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) +/** + * @} + */ + +/** @defgroup I2S3_clock_source + * @{ + */ + #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +/** @defgroup ADC_clock_source + * @{ + */ + +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ + ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) +/** + * @} + */ + +/** @defgroup LSE_configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RTC_clock_source + * @{ + */ + +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) +/** + * @} + */ + +/** @defgroup AHB_peripheral + * @{ + */ + +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) + +#ifndef STM32F10X_CL + #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) + #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) +#else + #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) + #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) + #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) + #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) + + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) + #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup APB2_peripheral + * @{ + */ + +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) +#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) +#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup APB1_peripheral + * @{ + */ + +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup Clock_source_to_output_on_MCO_pin + * @{ + */ + +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +#ifndef STM32F10X_CL + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2)) +#else + #define RCC_MCO_PLL2CLK ((uint8_t)0x08) + #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) + #define RCC_MCO_XT1 ((uint8_t)0x0A) + #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) + + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ + ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ + ((MCO) == RCC_MCO_PLL3CLK)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ + +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +#ifndef STM32F10X_CL + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#else + #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) + #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#endif /* STM32F10X_CL */ + +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions + * @{ + */ + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); +#endif + +#ifdef STM32F10X_CL + void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); + void RCC_PLL2Config(uint32_t RCC_PLL2Mul); + void RCC_PLL2Cmd(FunctionalState NewState); + void RCC_PLL3Config(uint32_t RCC_PLL3Mul); + void RCC_PLL3Cmd(FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); + +#ifndef STM32F10X_CL + void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +#else + void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); +#endif /* STM32F10X_CL */ + +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); + +#ifdef STM32F10X_CL + void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); + void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); +#endif /* STM32F10X_CL */ + +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +#ifdef STM32F10X_CL +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RCC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/STM32F1/sdio.h b/Marlin/src/HAL/STM32F1/sdio.h index 8777299f01bc..2d08b195c5ba 100644 --- a/Marlin/src/HAL/STM32F1/sdio.h +++ b/Marlin/src/HAL/STM32F1/sdio.h @@ -104,6 +104,11 @@ #define SDIO_CLOCK 18000000 /* 18 MHz */ #endif +#ifdef OVERCLOCK + #undef SDIO_CLOCK + #define SDIO_CLOCK ((18000000*OC_BASE_MHZ)/OC_TARGET_MHZ) /* 18 MHz */ +#endif + #ifndef SDIO_READ_RETRIES #define SDIO_READ_RETRIES 3 #endif diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index f77f3b2f0b81..fc823b8a1fc1 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -1095,20 +1095,25 @@ void setup() { #endif #define SETUP_RUN(C) do{ SETUP_LOG(STRINGIFY(C)); C; }while(0) - MYSERIAL1.begin(BAUDRATE); + #ifdef OVERCLOCK + #define CLOCKRATE ((BAUDRATE*OC_BASE_MHZ)/OC_TARGET_MHZ) + #else + #define CLOCKRATE BAUDRATE + #endif + MYSERIAL1.begin(CLOCKRATE); millis_t serial_connect_timeout = millis() + 1000UL; while (!MYSERIAL1.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ } #if HAS_MULTI_SERIAL && !HAS_ETHERNET #ifndef BAUDRATE_2 - #define BAUDRATE_2 BAUDRATE + #define BAUDRATE_2 CLOCKRATE #endif MYSERIAL2.begin(BAUDRATE_2); serial_connect_timeout = millis() + 1000UL; while (!MYSERIAL2.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ } #ifdef SERIAL_PORT_3 #ifndef BAUDRATE_3 - #define BAUDRATE_3 BAUDRATE + #define BAUDRATE_3 CLOCKRATE #endif MYSERIAL3.begin(BAUDRATE_3); serial_connect_timeout = millis() + 1000UL; diff --git a/Marlin/src/gcode/config/M575.cpp b/Marlin/src/gcode/config/M575.cpp index ce5f8fda0e2b..92b1f8015438 100644 --- a/Marlin/src/gcode/config/M575.cpp +++ b/Marlin/src/gcode/config/M575.cpp @@ -61,6 +61,10 @@ void GcodeSuite::M575() { SERIAL_FLUSH(); + #ifdef OVERCLOCK + baud = (baud*OC_BASE_MHZ)/OC_TARGET_MHZ; + #endif + if (set0) { MYSERIAL1.end(); MYSERIAL1.begin(baud); } #if HAS_MULTI_SERIAL diff --git a/Marlin/src/libs/stopwatch.cpp b/Marlin/src/libs/stopwatch.cpp index adfaa3b043e5..cc5bde0e3e9b 100644 --- a/Marlin/src/libs/stopwatch.cpp +++ b/Marlin/src/libs/stopwatch.cpp @@ -28,6 +28,11 @@ #include "../lcd/extui/ui_api.h" #endif +#ifdef OVERCLOCK + // elapsed time adjustment + #define millis() ((millis()*OC_BASE_MHZ)/OC_TARGET_MHZ) +#endif + Stopwatch::State Stopwatch::state; millis_t Stopwatch::accumulator; millis_t Stopwatch::startTimestamp; diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini index 9bfacfac07e9..3f9faf7bb221 100644 --- a/ini/stm32f1.ini +++ b/ini/stm32f1.ini @@ -85,6 +85,7 @@ build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DDEBUG_LEVEL=0 -DU20 -DTS_V12 +# -DOVERCLOCK -DOC_BASE_MHZ=72 -DOC_TARGET_MHZ=96 build_unflags = ${common_stm32f1.build_unflags} -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 @@ -100,6 +101,7 @@ build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DDEBUG_LEVEL=0 -DU20_PLUS -DTS_V12 +# -DOVERCLOCK -DOC_BASE_MHZ=72 -DOC_TARGET_MHZ=96 build_unflags = ${common_stm32f1.build_unflags} -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 @@ -116,6 +118,7 @@ build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=1 -D__FILE__=__func__ -Wno-builtin-macro-redefined -DU30 -DTS_V12 # -g -ggdb +# -DOVERCLOCK -DOC_BASE_MHZ=72 -DOC_TARGET_MHZ=96 build_unflags = ${common_stm32f1.build_unflags} -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 #upload_protocol = stlink