From 63d217e9da25ba7b0d2954719a5e59793b8ad3e6 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Wed, 28 Sep 2022 09:33:34 +0200 Subject: [PATCH] ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low Specify USBH_PEN GPIO being active-low rather than active-high. Note that this should not have any functional impact as for fixed regulators the regular GPIO polarity is ignored and a true active-high enable GPIO would need an additional enable-active-high property which is/was not the case here. However, this may be rather confusing which this patch fixes. Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 21c5049bda4eec..d8f985f297e42f 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -112,7 +112,7 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* SODIMM 129 / USBH_PEN */ + gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; regulator-max-microvolt = <5000000>;