SX1301 Lora Concentrator Raspberry PI based gateway setup

Datalogger for MicroPython and CPython.

Fork for JP Meijers' repo to use a multi-container configuration (Prometheus exporters run in separate containers) as well as collectd support

This program reads GPS and Accelerometer values from the FiPY board and push them to configured server via LoRa protocol.

A service which subscribes to TTN MQTT streams and forwards data to a database or API. Currently used to power our luftdaten.info LoRa project.

This project is around the FiPy module from Pycom which comes with ESP32 controller and supports 5 network communication protocol support on a single board. The protocols include LoRa/Sigfox/LTE CAT M1/Bluetooth and Wi-Fi. There are radios available for LoRa and LTE whereas the ESp32 itself supports Wi-Fi and Bluetooth. Pycom supports programmin…

Python3 MQTT Library for TTN

This repository is for the program on the LoPy. The LoPy will read data from the BME280 sensor and send it to The Things Network over LoRa.

Stream LoRaWAN messages to PostgreSQL

This UIFlow is intended to utilize the M5Stack Core + GPS module + LoRaWAN module to provide tracking via the Helium Network.

LoRa and LoRaWAN getting started using an Arduino as client and a Pycom as gateway. Also use Chirpstack and The Things Network as server. Documentation in Spanish.

An IoT device simulator that uses a real LoRaWAN® module (connected to serial port) to sent simulated IoT data to TTN® (The Things Network) infrastructure.

PycomGPSbox: from MicroPython to GPS data over LoRaWAN.

Simple PyCom LoPy/FiPy tracker for TTN Mapper

Barebones REST App for IoT. Hooks up with TheThingsNetwork

Converge TTN uplink messages from MQTT into InfluxDB, and display in Grafana.

This repository contains all the code and steps required to setup a BME280 with the Pycom LoPy4 on TTN Australia.

This is our working API for testing dataflow from our Nodes, to the TTN, and inserting into our DB.

Using LoPy IoT devices to measure a city's conditions