The LoRaMesher library implements a distance-vector routing protocol for communicating messages among LoRa nodes.

Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121

Enable CC1101 as a RF remote receiver/transmitter in ESPHome (using Radiolib)

Bresser 868 MHz Weather Sensor Radio Receiver based on ESP32/RP2040 and SX1262/SX1276/LR1121 - sends data to a LoRaWAN Network

Agent-driven design studio for ESP32 / ESPHome + LoRaWAN devices: generates ESPHome YAML, KiCad schematic/PCB, 3D-printable enclosures, and builds/flashes/provisions LoRaWAN firmware (ChirpStack + Home Assistant).

Receive and decode TST-507 TPMS signals

ESP32 LoRa AX.25 TNC with KISS, WA8DED, APRS, NET/ROM, BBS, and connected-mode digipeating.

Board configs for radio enabled modules.

LoRa ground station receiver firmware (TTGO LoRa32) designed for rocket telemetry and fully compatible with NectarMC

LoRa telemetry tracker firmware (TTGO TBEAM) designed for rocket/Balloon application and fully compatible with NectarMC

ESP32 LoRa gateway for smart beehive monitoring with reliable communication (ACK + CRC + sequence)

LoRa-based CO₂ monitoring system for mushroom grow operations. SCD41 + XIAO ESP32S3 + OpenMQTTGateway + Node-RED.

LoRaWAN MAC for ESPHome — OTAA join + sensor uplinks on SX1276/SX1278/SX1262 via RadioLib. The device half; pairs with a server-side orchestrator.

868 MHz (FSK) radio transmission of PV inverter Modbus interface data to MQTT client (WiFi)

"ping - pong" program between two ESP32 (T-BEAM) with LORA communication. Both transmit regularly their GPS position to each other.

Reusable LoRa radio component for ESP-IDF (ESP32 + SX1276/RFM95W) — blocking & continuous RX, FreeRTOS-native, no Arduino framework.

program: ESP32 nr 1 communicates with another nr.2 . on nr. there is one or more pushbuttons. Both ESP32 cummunicate via LORA radio. on the ESP32 nr 2., there are LED lights or relays. byt pushing the button on nr. 1 the relay on nr. 2 is switched on and second push to switch off

with ESP32 based T-BEAM, a LORA communication between 2 T-BEAMS. Sender sends to receiver, and receiver acknowledge message

Example for modified RadioLib library on Raspberry Pico