IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT

☢️ ESP8266 / ESP32 Firmware for collecting and reporting statistics from Geiger counters

IoT-devices GGreg20_V3 Ionizing Radiation Detector module under Home Assistant server with ESPHome plugin setup example

Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

An easy-to-build Geiger counter based on M4011 Geiger muller tube and Atmega328p(MCU)(SMD)

IoT-devices GGreg20_V3 ionizing radiation Geiger counter module for generic ESP32 under Home Assistant with ESPHome setup example

A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.

IoT-devices GGreg20_V3 ionizing radiation detector module driver library for Arduino

Geiger Mueller counter for IoT on an ESP8266 microcontroller

GGreg20_V3 Ionizing Radiation Detector for Arduino UNO WOKWI simulator

GQ GMC-500+ USB serial to MQTT bridge

GGreg20_V3 with Generic ESP32 with Tasmota Firmware and Berry script driver example

This is Geiger-Muller Counter

Prometheus exporter for GQ GMC (Geiger–Muller counter) devices

GM (Geiger-Muller) Tube Conversion Factor Calculator

Geiger Counter in MATLAB / Счетчик Гейгера на MATLAB

Radiation monitoring solution for a variety of instrument types.

☢️ A portable multi-language radiation analysis and calculation software for Geiger-Müller tubes using audio-ADC or manual insertion of measurements, sequential filtering and an isotope library. It differentiates radiation types (Ambient Dose Rate, Alpha, Beta, Gamma). Read readme or the PDF for details! Available in 🇺🇸 🇬🇧 🇩🇪 🇫🇷 🇪🇸 🇷🇺

A hackable open source sensor IoT board with network interface. A DIY Geiger counter KIT to contribute readings to the uRADMonitor network.

ATtiny3226 Geiger counter