Si5351q is a library for Arduino UNO or Nano, which allows a simple and quick configuration via I2C for the si5351 clock generator using fractional mode with farey approximation.

The module comprises a plurality of housings for mounting a variety of crystal oscillators.

Single output I2C programmable clock generator.

FPGA interface to work with cdce62005 clock synthesizer

Arduino library for the SparkFun Clock Generator 5P49V60 (Qwiic) breakout board. The board offers a wide range of customizable frequencies in a wide range of different signal types using a single reference clock.

Clock and UART Baud rate generation, radix-4 multiplier, function generator & accelerator wrappers.

A quad output variable frequency oscillator

Hardware repo for the SparkFun Clock Generator 5P49V60 (Qwiic) breakout board. The board offers a wide range of customizable frequencies in a wide range of different signal types using a single reference clock.

NanoVna V2 nanovna clock 25MHz referance change 25 MHz

Library for the Si5351A (10 MSOP - 3 Clocks Only) clock generator IC in the Arduino environment , based on NT7S library.

A clock generator for Node-RED

Clock and UART Baud rate generation, radix-4 multiplier, function generator & accelerator wrappers.

Clock generator with quadrature phase signal and OLED display.

Clock generators ( Si5351 for now ) toolbox.

Implementation of a Serial Peripheral Interface(SPI) using Verilog and testing various modes of the SPI Device

This project implements a bit error rate tester. A PRBS (pseudo random bit sequence) is generated that can feed the DUT. The receiver compares the internally delayed transmitted signals with received signal and counts up an error counter if their logic levels differ.

Pure Python async code for talking to the BitScope micro

Provide / define the INPUT_CLK_HZ parameter and the BHG_FP_clk_divider.v will generate a clock at the specified CLK_OUT_HZ parameter using fractional floating point division.

moog subharmonicon inspired modular clock/rhythm generator