Skip to content

Latest commit

 

History

History
205 lines (126 loc) · 8.14 KB

README.md

File metadata and controls

205 lines (126 loc) · 8.14 KB
Raw

Tile38 Website

This repository contains all of the files (excepting dependencies) necessary to edit, build, and deploy the Tile38 documentation website.

Table of Contents

Table of contents generated with markdown-toc

Branches

There are three main branches: master, docusaurus, and gh-pages.

Master

The master branch contains all documentation markdown (.md) and javascript (.js) files that must be edited to change the content on the documentation website

Docusaurus

The Tile38 documentation website is built using a customized version of the Docusaurus static website generator. The docusaurus branch contains the modified React-based Docusaurus component files required to build Tile38's documentation website. These files must be installed on your local machine using npm or your favorite other JavaScript package manager in order to build and test changes to the website (see Build section below for details).

gh-pages

The gh-pages branch contains the static website files for the Tile38 documentation website. These files are automatically generated from the markdown and other asset files found in the master branch during the build process. The deploy process pushes the static website files to this branch.

Never modify these files directly.

Edit Content

Only pages with an EDIT button can be modified by Non-Admin Contributors. The EDIT button can be found at the top right corner of the middle panel of any page found under the "Commands" or "Docs" categories of the Tile38 documentation website.

The EDIT button is not visible on screens smaller than 1,024 pixels wide.

For instructions on how to edit content see:

Non-Admin Contributors

  • todo

Admin Members

Clone Repo

If you have not done so already, clone this repo to your local machine:

git clone https://github.com/tile38/tile38.github.io.git

Make sure the master branch is checked out:

git checkout master

There are two ways to edit content as an Admin Member:

Via Local Machine

  • On your local machine, navigate to the content's .md file, which should be found in either the docs/commands or docs/topics directories.

  • Open the file in your favorite IDE or text/markdown editor and make the desired changes.

  • After saving your changes, you are ready to build and deploy them.

Via GitHub Repo

Content can be modified directly within this GitHub repo in one of two ways:

  • You can find the .md files for content in either the docs/commands or docs/topics directories of this repo's master branch and edit them directly from there.

    OR

  • Navigate to the content that you would like to modify on the Tile38 documentation website and click on the EDIT button found in the top right corner of the page. The EDIT button links to the .md file for that content in this repo's master branch.

Once you have navigated to the content's .md file:

  • Click on the pencil icon in the right corner of the content pane's header menu.

  • Make the desired changes to the .md file in GitHub's "Edit file" pane.

  • Commit the changes.

  • Pull the changed files down to the cloned repo on your local machine (make sure you are on the master branch).

    git pull

Your local copy of the repo should now be up to date. You are ready to build and deploy the changes.

Build

It is not necessary to run the build process described below if you just want to deploy the website without testing it. The deploy process builds the static website files before it publishes them to the gh-pages branch, a redundant process if you are building and testing changes to the site as well. But that's the way the Docusaurus folks set things up, and we chose not to change it. And why would you want to deploy changes before testing them, really? You wouldn't do that, of course you wouldn't, so ...

Install NPM

You will need to have npm installed in order to run the build command. To check if you have it installed, run the following at the command prompt:

npm -v

If you see command not found: npm in the output, go install npm.

Install Docusaurus Module

In order to build and test changes to website content, you will need to have the docusaurus branch of this repo installed in the ./website/node_modules/docusaurus/ directory of the cloned repo on your local machine. If that directory does not exist:

  • At the command prompt, navigate to the ./website directory of the clone of this repo on your local machine.

  • Run the install command:

    npm install

You should now have the most current version of our customized docusaurus component library installed with all its dependencies in the ./website/node_modules/ directory.

Build Static Pages

The build command populates the ./website/build/ directory with all of the static website's files.

  • Run the build command:

    npm run build

Any changes made to .md files in the master branch of this repo should now be reflected in the content's .html files in the gh-pages branch.

Test

You can test a local build of the website using Python's simple HTTP Server if you have Python installed:

  • At the command prompt, navigate to ./website/build/tile38.github.io.

  • Run Python's simple HTTP server:

    python -m SimpleHTTPServer # for Python version 2.x

    OR

    python3 -m http.server # for Python version 3.x

  • Open a browser window and view the website at URL localhost:8000.

If port 8000 is already in use, append the simple server command from above with a different port number, for example:

python -m SimpleHTTPServer 3000 # for Python version 2.x

Deploy

  • At the command prompt, navigate to the ./website directory of the cloned version of this repo on your local machine.
  • Run the publishing command (substitute your GitHub username for yourGitHubUserName in the script below):
GIT_USER=yourGitHubUserName \
CURRENT_BRANCH=master \
USE_SSH=false \
npm run publish-gh-pages

Changes should be visible on the live Tile38 Documentation website almost immediately (or within 10 minutes according to GitHub). Sometimes Google Chrome does not reflect the changes right away. Check the site on other browsers (Safari, Firefox, etc.). If the changes you made are showing up on those browsers, then for Chrome try the following:

  • Check/Uncheck the "disable cache" toggle in the Network tab of Chrome's developer tools.
  • Refresh the page (Click the circular arrow button next to the address bar).

Makefile

There's also a makefile that shortens the steps above.

make build   # build the site
make serve   # serve and test the site on your machine at port 8000
make publish # publish to tile38.github.io (https://tile38.com)