Merge branch 'sound/upstream-20260203' into merge/sound-upstream-20260203

Author: bardliao

.mailmap

@@ -12,6 +12,7 @@
 #
 Aaron Durbin <adurbin@google.com>
 Abel Vesa <abelvesa@kernel.org> <abel.vesa@nxp.com>
+Abel Vesa <abelvesa@kernel.org> <abel.vesa@linaro.org>
 Abel Vesa <abelvesa@kernel.org> <abelvesa@gmail.com>
 Abhijeet Dharmapurikar <quic_adharmap@quicinc.com> <adharmap@codeaurora.org>
 Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
@@ -878,6 +879,8 @@ Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yanteng Si <si.yanteng@linux.dev> <siyanteng@loongson.cn>
 Ying Huang <huang.ying.caritas@gmail.com> <ying.huang@intel.com>
+Yixun Lan <dlan@kernel.org> <dlan@gentoo.org>
+Yixun Lan <dlan@kernel.org> <yixun.lan@amlogic.com>
 Yosry Ahmed <yosry.ahmed@linux.dev> <yosryahmed@google.com>
 Yu-Chun Lin <eleanor.lin@realtek.com> <eleanor15x@gmail.com>
 Yusuke Goda <goda.yusuke@renesas.com>

CREDITS

@@ -2231,6 +2231,10 @@ S: Markham, Ontario
 S: L3R 8B2
 S: Canada
 
+N: Krzysztof Kozlowski
+E: krzk@kernel.org
+D: NFC network subsystem and drivers maintainer
+
 N: Christian Krafft
 D: PowerPC Cell support
 

Documentation/admin-guide/laptops/alienware-wmi.rst

@@ -105,7 +105,7 @@ information.
 
 Manual fan control on the other hand, is not exposed directly by the AWCC
 interface. Instead it let's us control a fan `boost` value. This `boost` value
-has the following aproximate behavior over the fan pwm:
+has the following approximate behavior over the fan pwm:
 
 ::
 

Documentation/admin-guide/sysctl/vm.rst

@@ -494,6 +494,10 @@ memory allocations.
 
 The default value depends on CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT.
 
+When CONFIG_MEM_ALLOC_PROFILING_DEBUG=y, this control is read-only to avoid
+warnings produced by allocations made while profiling is disabled and freed
+when it's enabled.
+
 
 memory_failure_early_kill
 =========================

Documentation/arch/riscv/uabi.rst

@@ -7,7 +7,9 @@ ISA string ordering in /proc/cpuinfo
 ------------------------------------
 
 The canonical order of ISA extension names in the ISA string is defined in
-chapter 27 of the unprivileged specification.
+Chapter 27 of the RISC-V Instruction Set Manual Volume I Unprivileged ISA
+(Document Version 20191213).
+
 The specification uses vague wording, such as should, when it comes to ordering,
 so for our purposes the following rules apply:
 

Documentation/arch/x86/amd_hsmp.rst

@@ -14,7 +14,7 @@ set of mailbox registers.
 
 More details on the interface can be found in chapter
 "7 Host System Management Port (HSMP)" of the family/model PPR
-Eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip
+Eg: https://docs.amd.com/v/u/en-US/55898_B1_pub_0_50
 
 
 HSMP interface is supported on EPYC line of server CPUs and MI300A (APU).
@@ -185,7 +185,7 @@ what happened. The transaction returns 0 on success.
 
 More details on the interface and message definitions can be found in chapter
 "7 Host System Management Port (HSMP)" of the respective family/model PPR
-eg: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip
+eg: https://docs.amd.com/v/u/en-US/55898_B1_pub_0_50
 
 User space C-APIs are made available by linking against the esmi library,
 which is provided by the E-SMS project https://www.amd.com/en/developer/e-sms.html.

Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Jitao shi <jitao.shi@mediatek.com>
 
 description: |
-  MediaTek DP and eDP are different hardwares and there are some features
+  MediaTek DP and eDP are different hardware and there are some features
   which are not supported for eDP. For example, audio is not supported for
   eDP. Therefore, we need to use two different compatibles to describe them.
   In addition, We just need to enable the power domain of DP, so the clock

Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml

@@ -74,6 +74,37 @@ allOf:
             - description: aggre UFS CARD AXI clock
             - description: RPMH CC IPA clock
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-config-noc
+              - qcom,sa8775p-dc-noc
+              - qcom,sa8775p-gem-noc
+              - qcom,sa8775p-gpdsp-anoc
+              - qcom,sa8775p-lpass-ag-noc
+              - qcom,sa8775p-mmss-noc
+              - qcom,sa8775p-nspa-noc
+              - qcom,sa8775p-nspb-noc
+              - qcom,sa8775p-pcie-anoc
+              - qcom,sa8775p-system-noc
+    then:
+      properties:
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-clk-virt
+              - qcom,sa8775p-mc-virt
+    then:
+      properties:
+        reg: false
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:

Documentation/devicetree/bindings/sound/fsl,audmix.yaml

@@ -34,7 +34,9 @@ description: |
 
 properties:
   compatible:
-    const: fsl,imx8qm-audmix
+    enum:
+      - fsl,imx8qm-audmix
+      - fsl,imx952-audmix
 
   reg:
     maxItems: 1
@@ -80,7 +82,17 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-audmix
+    then:
+      required:
+        - power-domains
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/sound/fsl,mqs.yaml

@@ -63,6 +63,16 @@ required:
 
 allOf:
   - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-mqs
+              - fsl,imx93-mqs
+    then:
+      required:
+        - gpr
   - if:
       properties:
         compatible:
@@ -91,8 +101,6 @@ allOf:
         clock-names:
           items:
             - const: mclk
-      required:
-        - gpr
 
 unevaluatedProperties: false