Merge branch 'master' of https://github.com/tasmota/docs

Author: blakadder

docs/Commands.md

@@ -181,7 +181,7 @@ Ssid<x\><a id="ssid"></a>|`<x>` = `1..2`<BR>`<value>` = set AP<x\> Wi-Fi SSID an
 WebColor<x\><a id="webcolor"></a>|Configure Web GUI colors (x = `1..19`)<BR>`#RRGGBB` = Set color for `WebColor<x>`<BR>`1` = Global text (Black)<BR>`2` = Global background (White)<BR>`3` = Form background (Greyish)<BR>`4` = Input text (Black)<BR>`5` = Input background (White)<BR>`6` = Console text (Black)<BR>`7` = Console background (White)<BR>`8` = Warning text (Red)<BR>`9` = Success text (Green)<BR>`10` = Button text (White)<BR>`11` = Button (Blueish)<BR>`12` = Button hovered over (Darker blueish)<BR>`13` = Restart/Reset/Delete button (Redish)<BR>`14` = Restart/Reset/Delete button hover (Darker reddish)<BR>`15` = Save button (Greenish)<BR>`16` = Save button hover (Darker greenish)<BR>`17` = Config timer tab text (White)<BR>`18` = Config timer tab background (Light grey)<br>`19` = Module title and FriendlyName text (Whiteish)<br>[User themes](WebUI#themes)
 WebPassword<a id="webpassword"></a>|Show current web server password<BR>`0` = disable use of password for web UI<BR>`1` = reset password to firmware default (`WEB_PASSWORD`)<BR>`<value>` = set web UI password (32 char limit) for user `WEB_USERNAME` *(Default WEB_USERNAME = `admin`)*
 WebRefresh<a id="webrefresh"></a>|Web page refresh<BR>`1000..10000` = set refresh time in milliseconds *(default = `2345`)*
-WebSend<a id="websend"></a>|Send a command to Tasmota host over http. If a command starts with a `\` it will be used as a link.<BR>`[<host>:<port>,<user>:<password>] <command>`<BR>`<host>` = hostname or IP address.<BR>`<port>` = port for the device if not the default `80`<BR>`<user>` = enter username of the device you're sending the command to<BR>`<password>` = enter password of the device you're sending the command to<BR>`<command>` = command and payload<BR>*example: `[<ip>] POWER1 ON` sends `http://<ip>/cm?cmnd=POWER1 ON`*
+WebSend<a id="websend"></a>|Send a command to Tasmota host over http. If a command starts with a `\` it will be used as a link.<BR>`[<host>:<port>,<user>:<password>] <command>`<BR>`<host>` = hostname or IP address.<BR>`<port>` = port for the device if not the default `80`<BR>`<user>` = enter username of the device you're sending the command to<BR>`<password>` = enter password of the device you're sending the command to<BR>`<command>` = command and payload<BR>*example 1: `[<ip>] POWER1 ON` sends `http://<ip>/cm?cmnd=POWER1 ON`*<BR>*example 2: `WebSend [myserver.com] /fancy/data.php?log=1234` sends `http://myserver.com/fancy/data.php?log=1234`*
 WebSensor<x\><a id="websensor"></a>|Control display of sensor telemetry in the web UI<BR>`0` = Do not display sensor's telemetry<BR>`1` = Display sensor's telemetry (*default*)<BR>`<x>` = number corresponding to the sensor - listed in the `sns` section of the [supported sensor spreadsheet](https://docs.google.com/spreadsheets/d/e/2PACX-1vRBFqaP5QAFmT8iIYBxrn-EQp7-SrkxL6tb0OjpqtBxDEsmkiWCFei3sFyA_UXoqlbs3CqtEdOfC6Pa/pubhtml?gid=1029939700&single=true)<BR>`<x>` = `3` Energy telemetry<BR>Issue a `Status 4` to obtain a list of sensor types enabled in the firmware loaded on the device.
 WebServer<a id="webserver"></a>|`0` = stop web server<BR>`1` = start web server in user mode<BR>`2` = start web server in admin mode
 WifiConfig<a id="wificonfig"></a>|`0` = disable Wi-Fi Manager and reboot (used with alternate AP)<BR>`2` = set [Wi-Fi Manager](https://github.com/tzapu/WiFiManager/blob/master/README.md#how-it-works) as the current configuration tool and start Wi-Fi Manager (web server at 192.168.4.1) for 3 minutes, then reboot and try to connect Wi-Fi network<BR>`4` = disable Wi-Fi Manager but retry the other AP without rebooting<BR>`5` = disable Wi-Fi Manager and wait until that AP is available again without rebooting<BR>`6` = Wi-Fi parameters can only be entered via commands in the serial console<BR>`7` = set [Wi-Fi Manager](https://github.com/tzapu/WiFiManager/blob/master/README.md#how-it-works) (web server at 192.168.4.1) as the current configuration tool restricted with the only option to reset settings. <BR>_This setting is recommended for devices without an external control/reset button_.<BR>&emsp;_No longer supported_ <BR>`1` = set [SmartConfig](https://community.particle.io/t/smart-config-the-missing-manual-now-available/442) ([Android](https://play.google.com/store/apps/details?id=com.iotmaker&hl=en_US)/iOS) as the current configuration tool, start SmartConfig for 3 minutes and reboot and try to connect to Wi-Fi<BR>`3` = set [WPS](https://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup) as configuration tool, try WPS for 3 minutes and reboot and try to connect to Wi-Fi