Library implementing the Boot Mode protocol for specific Renesas microcontrollers and CLI for programming firmware images
View library documentation on docs.rs
$ cargo install rxprog --features rxprog-cli
The rxprog-cli binary will now be available.
See rxprog-cli --help for more details.
To connect to a target on COM3 to query the available devices:
$ rxprog-cli "p=COM3"
To connect to a target on /dev/ttyS4 and program an image:
$ rxprog-cli "p=/dev/ttyS4;d=7805;cm=0;if=3200;mr=x1,x1;br=115200" image.ihex
Querying multiplication ratios and input frequency ranges:
$ rxprog-cli "p=COM3;d=7805;cm=0"
Connecting to target on COM3
The selected debug adapter does not support automatic reset. Please reset the target into boot mode and press ENTER.
Continuing...
Initial connection succeeded
No input frequency, multiplication ratio and/or bit rate specified in connection string. Querying target for supported multiplication ratios and operating frequency ranges:
Clock Multiplication ratios
==============================
0 x1
1 x1
Clock Minimum frequency Maximum frequency
===============================================
0 3200 3200
1 3200 3200
Hint: select an input frequency, multiplication ratio and bit rate with if=<input frequency>;mr=<ratio 1>,<ratio 2>,...;br=<bit rate>
Programming an image:
$ rxprog-cli "p=COM3;d=7805;cm=0;if=3200;mr=x1,x1;br=115200" blink.ihex
Connecting to target on COM3
The selected debug adapter does not support automatic reset. Please reset the target into boot mode and press ENTER.
Continuing...
Initial connection succeeded
Detected ihex image from extension
Transitioned to programming/erasure state successfully
Programming...
Programming complete.
Verifying...
Verification complete.