Uploads to Nucleo boards on MacOS 13.1 fail

[smcharg]

Under MacOS 13.1 (Ventura) the macosx/massStorageCopy.sh script fails to detect the Nucleo device when mounted. This is due to the output from the "df -Hl" command used by the script no longer reporting the device, for example:

df -Hl
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1s5s1 500G 12G 56G 18% 348618 548377440 0% /
/dev/disk1s2 500G 3.4G 56G 6% 1652 548377440 0% /System/Volumes/Preboot
/dev/disk1s4 500G 2.1G 56G 4% 2 548377440 0% /System/Volumes/VM
/dev/disk1s6 500G 60M 56G 1% 650 548377440 0% /System/Volumes/Update
/dev/disk1s1 500G 424G 56G 89% 3074033 548377440 1% /System/Volumes/Data
/dev/disk1s5 500G 12G 56G 18% 348576 548377440 0% /System/Volumes/Update/mnt1
/dev/disk2s2 5.0T 2.5T 2.5T 50% 17130817 4277836462 0% /Volumes/SG_5TB#2

Using "df -Ha" does report the device (last in the output below):

df -Ha
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1s5s1 500G 12G 56G 18% 348618 548345480 0% /
devfs 206k 206k 0B 100% 702 0 100% /dev
/dev/disk1s2 500G 3.4G 56G 6% 1652 548345480 0% /System/Volumes/Preboot
/dev/disk1s4 500G 2.1G 56G 4% 2 548345480 0% /System/Volumes/VM
/dev/disk1s6 500G 60M 56G 1% 650 548345480 0% /System/Volumes/Update
/dev/disk1s1 500G 424G 56G 89% 3074033 548345480 1% /System/Volumes/Data
map auto_home 0B 0B 0B 100% 0 0 100% /System/Volumes/Data/home
/dev/disk1s5 500G 12G 56G 18% 348576 548345480 0% /System/Volumes/Update/mnt1
/dev/disk2s2 5.0T 2.5T 2.5T 50% 17130817 4277836462 0% /Volumes/SG_5TB#2
msdos://disk3/NODE_F303RE 557k 29k 528k 6% 1 0 100% /Volumes/NODE_F303RE

With the result the script can detect the device and properly perform the upload.

Arduino STM32 MCU based boards 2.4.0
Arduino IDE 2.0.3
MacOS 13.1

[fpistm]

Hi,
this issue has already been reported and fixed.
It is linked to update of coreutils on Mac OS.
stm32duino/Arduino_Tools#86

Fixed will be available within the next release.