Updates to dependencies / serial port updates

CHANGELOG.md

@@ -11,13 +11,28 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 - Updated `stm32f7` dependency 0.14.0 -> 0.15
   - Use PascalCase for generated values of enums ([stm32-rs#727](https://github.com/stm32-rs/stm32-rs/pull/727))
-- Updated `synopsys-usb-otg` dependency 0.2.3 -> 0.3
+- Updated `synopsys-usb-otg` dependency 0.2.3 -> 0.4.0
 - Updated `stm32-fmc` dependency 0.2.0 -> 0.3
 - Added Interruptable trait to Alternate mode pins
 - Added a "low pin count" variant of the f730 chip to the crate features: packages <144 pins don't include a high speed USB PHY
 - Added SPI2_SCK pin for stm32f769i-discovery
 - Fix mass-erase triggering in `flash` on smaller chips
 - Remove the need for software u64 division in the clock setup code, shrinking code (#211)
+- Updated `cortex-m` dependency 0.7.4 -> 0.7.7
+- Updated `nb` dependency 1.0 -> 1.1.0
+- Updated `micromath` dependency 2.0 -> 2.1.0
+- Updated `fugit` dependency 0.3.5 -> 0.3.7
+- Updated `bitflags` dependency 1.3.2 -> 2.6.0
+- Updated `embedded-hal` dependency 0.2.3 -> 0.2.7
+- Updated `display-interface` dependency 0.4.1 -> 0.5.0
+- Updated `cortex-m-semihosting` development dependency 0.3.3 -> 0.5.0
+  - Removed unwrap from the end of hprintln / hprint for new version of semihosting
+- Updated `panic-semihosting` development dependency 0.5.2 -> 0.6.0
+- Updated `embedded-graphics` development dependency 0.6.1 -> 0.6.2
+- Updated `usb-device` development dependency 0.2.5 -> 0.3.2
+- Updated `usbd-serial` development dependency 0.1.0 -> 0.2.2
+  - Updated usb serial example to use new api
+- Renamed .cargo/config -> .cargo/config.toml
 
 ## [v0.7.0] - 2022-06-05
 

Cargo.toml

@@ -18,19 +18,19 @@ features = ["stm32f746", "rt"]
 
 [dependencies]
 as-slice = "0.2"
-cortex-m = "0.7.4"
+cortex-m = "0.7.7"
 cortex-m-rt = ">=0.6.15, <0.8"
-nb = "1.0"
+nb = "1.1.0"
 stm32f7 = "0.15"
-micromath = "2.0"
-synopsys-usb-otg = { version = "0.3", features = ["cortex-m"], optional = true }
+micromath = "2.1.0"
+synopsys-usb-otg = { version = "0.4.0", features = ["cortex-m"], optional = true }
 stm32-fmc = { version = "0.3", features = ["sdram"], optional = true }
 rand_core = "0.6"
 bxcan = "0.7"
 bare-metal = "1.0"
-fugit = "0.3.5"
+fugit = "0.3.7"
 fugit-timer = "0.1.3"
-bitflags = "1.3.2"
+bitflags = "2.6.0"
 rtic-monotonic = { version = "1.0", optional = true }
 
 [dependencies.time]
@@ -43,23 +43,23 @@ version = "0.3.0"
 
 [dependencies.embedded-hal]
 features = ["unproven"]
-version = "0.2.3"
+version = "0.2.7"
 
 [dependencies.void]
 default-features = false
 version = "1.0.2"
 
 [dependencies.display-interface]
 optional = true
-version = "0.4.1"
+version = "0.5.0"
 
 [dev-dependencies]
-cortex-m-semihosting = "0.3.3"
+cortex-m-semihosting = "0.5.0"
 panic-halt = "0.2.0"
-panic-semihosting = "0.5.2"
-embedded-graphics = "0.6.1"
-usb-device = "0.2.5"
-usbd-serial = "0.1.0"
+panic-semihosting = "0.6.0"
+embedded-graphics = "0.6.2"
+usb-device = "0.3.2"
+usbd-serial = "0.2.2"
 
 [dev-dependencies.time]
 version = "0.3"

examples/flash.rs

@@ -39,7 +39,7 @@ fn main() -> ! {
 
     // Compare the written data with the expected value.
     if flash_data == DATA {
-        hprintln!("Flash programming successful").unwrap();
+        hprintln!("Flash programming successful");
     }
 
     loop {}

examples/fmc.rs

@@ -124,7 +124,7 @@ fn main() -> ! {
         }
     }
 
-    hprintln!("Success!").unwrap();
+    hprintln!("Success!");
 
     loop {}
 }

examples/hello.rs

@@ -13,6 +13,6 @@ use cortex_m_semihosting::hprintln;
 
 #[entry]
 fn main() -> ! {
-    hprintln!("Hello, world!").unwrap();
+    hprintln!("Hello, world!");
     loop {}
 }

examples/i2c_scanner.rs

@@ -36,26 +36,26 @@ fn main() -> ! {
         50_000,
     );
 
-    hprintln!("Start i2c scanning...").expect("Error using hprintln.");
-    hprintln!().unwrap();
+    hprintln!("Start i2c scanning...");
+    hprintln!();
 
     for addr in 0x00_u8..0x80 {
         // Write the empty array and check the slave response.
         let byte: [u8; 1] = [0; 1];
         if VALID_ADDR_RANGE.contains(&addr) && i2c.write(addr, &byte).is_ok() {
-            hprint!("{:02x}", addr).unwrap();
+            hprint!("{:02x}", addr);
         } else {
-            hprint!("..").unwrap();
+            hprint!("..");
         }
         if addr % 0x10 == 0x0F {
-            hprintln!().unwrap();
+            hprintln!();
         } else {
-            hprint!(" ").unwrap();
+            hprint!(" ");
         }
     }
 
-    hprintln!().unwrap();
-    hprintln!("Done!").unwrap();
+    hprintln!();
+    hprintln!("Done!");
 
     loop {}
 }

examples/rng.rs

@@ -15,7 +15,7 @@ fn main() -> ! {
     let p = pac::Peripherals::take().unwrap();
     let mut rng = p.RNG.init();
     let val = rng.get_rand().unwrap();
-    hprintln!("random value {}", val).unwrap();
+    hprintln!("random value {}", val);
     loop {
         core::hint::spin_loop();
     }

examples/rtc.rs

@@ -50,6 +50,6 @@ fn main() -> ! {
     // rtc.set_minutes(59).unwrap();
     // rtc.set_seconds(59).unwrap();
     loop {
-        hprintln!("{}", rtc.get_datetime()).unwrap();
+        hprintln!("{}", rtc.get_datetime());
     }
 }

examples/stm32f7disco-qspi-flash/main.rs

@@ -97,7 +97,7 @@ fn memory_example_polling(mt25q: &mut mt25q::Mt25q) {
         }
     }
 
-    hprintln!("Flash device memory test successful!").unwrap();
+    hprintln!("Flash device memory test successful!");
 }
 
 fn memory_example_dma(
@@ -174,5 +174,5 @@ fn memory_example_dma(
         }
     }
 
-    hprintln!("Flash device memory DMA test successful!").unwrap();
+    hprintln!("Flash device memory DMA test successful!");
 }

examples/timer-periph.rs

@@ -30,32 +30,32 @@ fn main() -> ! {
     let mut timer = dp.TIM1.counter_ms(&clocks);
     timer.start(1.secs()).unwrap();
 
-    hprintln!("hello!").unwrap();
+    hprintln!("hello!");
     // wait until timer expires
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 1").unwrap();
+    hprintln!("timer expired 1");
 
     // the function counter_ms() creates a periodic timer, so it is automatically
     // restarted
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 2").unwrap();
+    hprintln!("timer expired 2");
 
     // cancel current timer
     timer.cancel().unwrap();
 
     // start it again
     timer.start(1.secs()).unwrap();
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 3").unwrap();
+    hprintln!("timer expired 3");
 
     timer.cancel().unwrap();
     let cancel_outcome = timer.cancel();
     assert_eq!(cancel_outcome, Err(Error::Disabled));
-    hprintln!("ehy, you cannot cancel a timer two times!").unwrap();
+    hprintln!("ehy, you cannot cancel a timer two times!");
     // this time the timer was not restarted, therefore this function should
     // wait forever
     nb::block!(timer.wait()).unwrap();
     // you should never see this print
-    hprintln!("if you see this there is something wrong").unwrap();
+    hprintln!("if you see this there is something wrong");
     panic!();
 }

examples/timer-syst.rs

@@ -31,32 +31,32 @@ fn main() -> ! {
     let mut timer = cp.SYST.counter_us(&clocks);
     timer.start(42.millis()).unwrap();
 
-    hprintln!("hello!").unwrap();
+    hprintln!("hello!");
     // wait until timer expires
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 1").unwrap();
+    hprintln!("timer expired 1");
 
     // the function syst() creates a periodic timer, so it is automatically
     // restarted
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 2").unwrap();
+    hprintln!("timer expired 2");
 
     // cancel current timer
     timer.cancel().unwrap();
 
     // start it again
     timer.start(42.millis()).unwrap();
     nb::block!(timer.wait()).unwrap();
-    hprintln!("timer expired 3").unwrap();
+    hprintln!("timer expired 3");
 
     timer.cancel().unwrap();
     let cancel_outcome = timer.cancel();
     assert_eq!(cancel_outcome, Err(Error::Disabled));
-    hprintln!("ehy, you cannot cancel a timer two times!").unwrap();
+    hprintln!("ehy, you cannot cancel a timer two times!");
     // this time the timer was not restarted, therefore this function should
     // wait forever
     nb::block!(timer.wait()).unwrap();
     // you should never see this print
-    hprintln!("if you see this there is something wrong").unwrap();
+    hprintln!("if you see this there is something wrong");
     panic!();
 }

examples/usb_serial.rs

@@ -77,11 +77,14 @@ fn main() -> ! {
     let mut serial = usbd_serial::SerialPort::new(&usb_bus);
 
     let mut usb_dev = UsbDeviceBuilder::new(&usb_bus, UsbVidPid(0x16c0, 0x27dd))
-        .manufacturer("Fake company")
-        .product("Serial port")
-        .serial_number("TEST")
+        .strings(&[StringDescriptors::default()
+            .manufacturer("Fake company")
+            .product("Serial port")
+            .serial_number("TEST")
+        ]).unwrap()
         .device_class(usbd_serial::USB_CLASS_CDC)
         .max_packet_size_0(64) // Size required for HS, and ok for FS
+        .unwrap()
         .build();
 
     loop {