Skip to content

Latest commit

 

History

History
38 lines (24 loc) · 2.11 KB

README.md

File metadata and controls

38 lines (24 loc) · 2.11 KB
Raw

STM32WBA-BLE-Weight-Scale

  • The STM32WBA-BLE-Weight-Scale demonstrating Bluetooth® SIG Weight Scale Profile 1.0 example, based on STM32CubeWBA v1.3.1

Hardware Needed

  • This example runs on STM32WBAxx devices.
  • Connect the Nucleo Board to your PC with a USB cable type A to mini-B to ST-LINK connector (USB_STLINK).

User's Guide

  1. Run this Bluetooth® Low Energy Weight Scale project where the STM32WBA will advertise

  2. Use the ANDROID/IOS ST BLE Sensor application or ST BLE Toolbox application to connect with this Bluetooth® Low Energy Weight Scale Profile 1.0 (WSS_XX where XX is the 2 last digit of the Bluetooth® Device Address)

    Scan on ANDROID/IOS:

    image

    After Connection and Selecting the Weight Scale Service 1.0 on ANDROID/IOS you will see the following Characteristics:

    image image

  3. Use terminal programs like Tera Term to see the logs of each board via the onboard ST-Link. (115200/8/1/n)

    image

Troubleshooting

Caution : Issues and the pull-requests are not supported to submit problems or suggestions related to the software delivered in this repository. The STM32WBA-BLE-Weight-Scale example is being delivered as-is, and not necessarily supported by ST.

For any other question related to the product, the hardware performance or characteristics, the tools, the environment, you can submit it to the ST Community on the STM32 MCUs related page.